Installing Ubuntu 9.10 (Karmic Koala) on a ThinkPad X200
Just brief info for now as I didn't have time to test all features yet. Please update if you have info on features marked as untested.
These notes also apply to the x200 tablet.
Installation
- Installing from desktop cd:
Works fine with external usb drive
- Installing from USB stick:
Works fine
- Installing from alternate cd:
works fine with optical drive in X200 UltraBase, just follow the steps
- Installing via wubi:
works fine, except hibernate (normal for wubi installations)
- Updating from Jaunty:
not tested
Features support
Display
- internal LCD: works fine
- external VGA: works fine
- external VGA via ultraBase: works fine
- DisplayPort via ultraBase: works fine
Trackpoint
The middle Scrollbutton won't work out-of-the-box, you can solve it with the help of the following Link: http://samiux.wordpress.com/2008/11/02/howto-lenovo-thinkpad-scroll-button-on-ubuntu-810/
I find the middle scrollbutton doesn't works very well for me by following these steps.
The solution I currently use is to automatically execute the following commands:
Quote:
xinput set-int-prop "TPPS/2 IBM TrackPoint" "Evdev Wheel Emulation" 8 1 xinput set-int-prop "TPPS/2 IBM TrackPoint" "Evdev Wheel Emulation Button" 8 2 xinput set-int-prop "TPPS/2 IBM TrackPoint" "Evdev Wheel Emulation Y Axis" 8 4 5 xinput set-int-prop "TPPS/2 IBM TrackPoint" "Evdev Wheel Emugreatlation X Axis" 8 6 7
Another way to enable scrolling even if the instructions are a little older: http://www.thinkwiki.org/wiki/How_to_configure_the_TrackPoint#Scrolling. You can also try using gpointing-device-settings instructions as described at the top of the page but it's not persistent when you go into suspend-resume.
WiFi
- Intel 5100: works fine
After updating the kernel to 2.6.31-15-generic, the old kernel panic problem which used to happen in ubuntu 8.04 or older release, comes up again. I don't know whether this affects a fresh installation of karmic as I update the system immediately after I get a wired connection.
I have the linux-backports-modules-wireless-karmic-generic package installed. Now it works fine.
- Intel 5300: works fine
- Intel 5350: works fine, kernel sees it as 5300
Bluetooth
generally works, but see https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/381913
3G
Works fine
GPS
Works, with the installation of http://sourceforge.net/apps/mediawiki/mbm/index.php?title=Main_Page#GPS_Control_.28mbm-gpsd.29
Note: mbm-gpsd is not running after wake from suspend
Webcam
Works perfectly.
Sound
- internal speakers: works fine, good volume
- headphones: works
- headphones via ultrabase: works fine
- internal mic: works fine, good sensitivity
- mic via ultrabase: not tested
- Volume up and down keys Work fine, Mute does not.
(Mute actually works but you won't find an OSD showing you it's on mute, unlike volume up and down. Additionally, plugging in your headphones even while on mute will let you hear sounds)
To get OSD working with Mute: (http://www.codefx.biz/2009/11/x200-mute-button)
Edit the file /etc/grub.d/10_linux and add acpi_osi=Linux to the line with $GRUB_CMDLINE_LINUX_DEFAULT, so it will look like this:
"${GRUB_CMDLINE_LINUX} ${GRUB_CMDLINE_EXTRA} ${GRUB_CMDLINE_LINUX_DEFAULT} acpi_osi=Linux" \
Then run $ sudo update-grub
Sensors
mostly work, for HDD hddtemp is needed
Fingerprint
Doesn't work, see http://www.reactivated.net/fprint/wiki/Unsupported_devices#AuthenTec_AES2550_.26_AES2810
HDAPS
I couldn't make hdaps module to use Tp smapi. It seems module-assistant does not build patched version of hdaps module from tp-smapi-source package.
Nevertheless hdaps seems to work fine with thinkpad_ec. After installing hdapsd edit /etc/default/hdapsd make sure START is set to "yes", DISK to "sda" and adjust SENSITIVITY (50 works ok for most people).
edit: use tp-smapi as in [1]
Fan
While the X200 is known for it's good cooling system, when running Ubuntu the fan seems to run constantly at around 3000rpm after it reached a certain threshold temperature. See the related bugreport on Launchpad: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/380303
For reasons of power consumption and noise reduction you might want to control the fans on your own using tp-fan, see ACPI_fan_control_script#ThinkPad_Fan_Control_GTK_GUI_tool. The Jaunty PPA seems to work fine on Karmic.
For me the following settings seem to work: Check both boxes, set all sensors to 15% and the temperature threshold of all sensors to 25°C/68°F. With this settings the fan runs constantly with 2000rpm.
Suspending
Works fine as long as you don't suspend when docked.
edit: Suspend with dock works for me.
Hibernating
Works fine when hibernating when undocked. Not tested when docked.
Docking and Undocking
- Docking works ok. System even tries to switch automatically to saved external monitor display configuration and sometimes it even does the smart thing
- Before undocking you must always press "pre-undock" button on the left side of docking station and wait until green arrow allows you to proceed. Otherwise system will start to beep at you and it will probably get confused.
- Undocking and/or pressing "pre-undock" button switches automatically display to internal LCD only so you don't have to worry about it.
- Undocking doesn't umount automatically devices connected to docking station (usb pendrives, optical drive) so you must remember to do this manually. See https://bugs.launchpad.net/ubuntu/+source/pm-utils/+bug/433682
- Suspending or hibernating when docked is not a good idea as system will probably get confused when resumed not docked also.
MemoryCardReader
Works
Tablet
Screen
- Screen rotation can be enabled with xrandr and https://launchpad.net/~thjaeger/+archive/tabletpc/+packages
- TouchScreen requires recalibration as described https://help.ubuntu.com/community/X61T
- Pen pressure sensitivity works
=Automatic Brightness Controll
Possible using a script like the one at this link:
http://gnome-look.org/content/show.php?content=128780&vote=good&tan=54635248
Remember to install php5-cli and php5-gd, in the cfg file: pbr=2
