With the UltraPort connector being nothing else than a standard USB 1.1 interface with a proprietary connector, it should in theory be possible to transform any USB 1.1 device into an UltraPort device.
This idea is underpinned by the fact that a mechanical adapter comes with every UltraPort device, that transforms the UltraPort connector into a standard USB connector.
Pin Layout comparison
The following UltraPort pin layout has been discovered through measuring the UltraPort of a ThinkPad X21. It is not very well tested, but worked well for the author of this information.
The information on the USB Type A connector pin layout has been copied from Wikipedia.
UltraPort connector
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
|
9 |
10 |
11 |
12 |
13
|
| GND
|
0
|
VCC
|
VCC
|
GND
|
D+
|
D-
|
GND
|
.
|
?
|
?
|
?
|
0
|
GND
|
|
|
Standard USB Type A connector
|
| Pin |
Name |
Description
|
| 1,5,8,13 |
GND |
Ground
|
| 2,12 |
0 |
probably not connected
|
| 3,4 |
VCC |
+5 V DC
|
| 6 |
D+ |
Data +
|
| 7 |
D- |
Data -
|
| 9,10,11 |
? |
unidentified
|
|
. |
it is fastener not a pin
|
|
| Pin |
Name |
Cable color |
Description
|
| 1 |
VCC |
red |
+5 V DC
|
| 2 |
D+ |
green |
Data +
|
| 3 |
D- |
white |
Data -
|
| 4 |
GND |
black |
Ground
|
|
