Installing Ubuntu on a ThinkPad 560E

From ThinkWiki
Revision as of 18:09, 7 January 2008 by Whizkid (Talk | contribs) (Extremely short version)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Work in progress.... --Whizkid 18:09, 7 January 2008 (CET)

Introduction

The 560E is a capable ultra-portable machine, but lacks booting options. I used a PCMCIA SD card reader and a PCMCIA wired network card to install Ubuntu. A bare minimum install of Ubuntu requires 32MB RAM. Consider adding a 64MB stick to your 560E to fully load it with 80MB RAM.

2GB of disk space is required for a typical install. The 560E can handle drives at least up to 8GB and possibly larger.

Preparation

  • Get the Ubuntu netboot image
  • Insert card reader into another Linux laptop
dd if=netboot.img of=/dev/sdb
  • Change boot order on 560E to PCMCIA then hard disk
  • Insert card reader and network card and start machine
Retrieved from "https://www.thinkwiki.org/w/index.php?title=Installing_Ubuntu_on_a_ThinkPad_560E&oldid=35543"