Ipw2200
Contents
Intel PRO/Wireless 2200/2915 Driver for WiFi
Linux driver for the 802.11bg and 802.11abg NICs - miniPCI cards - found in Centrino laptops. This driver only works on 2.6.x kernels (2.6.4 or newer).
The following adapters sold by IBM use these chips:
Project Homepage / Availability
http://ipw2200.sourceforge.net/
Packages
- Fedora Packages(1): Fedora Core includes the ipw2200-drivers in FC3 (with updates) and FC4. You still need to grab the firmware from http://rpm.livna.org/
- Fedora Packages(2): http://www.atrpms.net/name/ipw2200/
- Mandrake 10.1: The ipw2200 driver modules are included in the stock kernel package.
- Gentoo: The driver is in the portage tree: emerge net-wireless/ipw2200 and net-wireless/ipw2200-firmware
- Debian Packages: http://packages.debian.org/ipw2200-source
Status
in development, usable, WEP 128bit encryption works, WPA does also work with drivers >= 1.0.2 (beta at the moment, use wpa_supplicant for WPA-functionality), Monitor/RFMon is supported as of 1.0.6 and firmware 2.3!
Current Version: 1.0.8
Firmware Version: 2.4
Generally works well, but some users experience problems (especially with firmware restarts and with WPA functionality with wpa_supplicant); see the discussion page for examples.
For kernels 2.6.13 and newer, the ipw2200 release candidates require an updated IEEE 802.11 subsystem, which can be downloaded from the ieee80211 project page.
Installation from sourcecode
Download the latest ieee80211 module and install it:
# tar xzvf ieee80211-1.1.6.tgz # cd ieee80211-1.1.6 # make # make install
Download the latest ipw2200 module and install it:
# tar xzvf ipw2200-1.0.8.tgz # cd ipw2200-1.0.8 # make # make install
Download the matching firmware and install it:
# tar xzvf ipw2200-fw-2.4.tgz -C /lib/firmware
Test:
# modprobe ipw2200 # iwconfig
Power Management
To enable power management, issue:
# iwpriv wlan0 set_power 7
where wlan0 is the name if your interface. This will reduce idle power consumption by several Watts compared to no power management.
To disable the radio (and further reduce power consumption) when the card is not in used, issue:
# echo 1 > /sys/bus/pci/drivers/ipw2200/*/rf_kill
To enable the radio, issue:
# echo 0 > /sys/bus/pci/drivers/ipw2200/*/rf_kill
To make the radio off by default after boot, add
options ipw2200 disable=1
to your /etc/modprobe.conf or equivalent.
See README.ipw2200 in the ipw2200 package for details and other options.
Additional Comments
Your kernel may include an old version of the ipw2200 driver. It is recommended to use the latest version.
Make sure you also install the firmware version needed by the driver version you use. You can find the firmware here. To install it, decompress the .tgz file into /lib/firmware.
The driver doesn't appear to support MII interface, so any tools like automatic network configuration managers ( whereami ) that rely on mii-tool do not work.
