Difference between revisions of "Ethernet Controllers"

From ThinkWiki
Jump to: navigation, search
m (→‎Intel Fast Ethernet (10/100))
(cleanup old notes)
Line 46: Line 46:
 
* {{R51}}
 
* {{R51}}
 
* {{X40}}
 
* {{X40}}
 +
=== Intel Gigabit (10/100/1000) PCI-Express===
 +
Driver: [[e1000e]]
 
'''Intel 82573L''' (PCI-Express)
 
'''Intel 82573L''' (PCI-Express)
 
* {{T60}}, {{T60p}}
 
* {{T60}}, {{T60p}}
Line 54: Line 56:
 
'''Intel 82567LM''' (PCI-Express) (w/ [[Intel Active Management Technology (AMT)]])
 
'''Intel 82567LM''' (PCI-Express) (w/ [[Intel Active Management Technology (AMT)]])
 
* {{X200}}
 
* {{X200}}
−
* Driver: [[e1000e]]
 
−
Note: DO NOT(!!!) use the "irqpoll"  boot parameter. This causes the network card to lose it's irq, and makes any stability of the network connection impossible.
 
−
Note: There is a [[Problem with e1000: Open issue with latency|known issue]] with the e1000, t60/t60p and the 2.6.17 kernel. It is unconfirmed if this issue effects other configurations.<br>
 
−
Note: This chip supports Auto-MDIX, meaning you will never need a crossover ethernet cable.<br>
 
−
Note: The first signs of explicit support for this chip in 2.6 kernels is with 2.6.12-rc2.<br>
 
−
Note: Red Hat Enterprise Linux 3.0 (2.4 kernel based) begins 82573L support with Update 7.<br>
 
−
Note: Some users report issues: [[Problem_with_e1000:_EEPROM_Checksum_Is_Not_Valid]]. This issue stands behind the symptom, that the intel controller 82573L will only work, if a network cable is attached at boot time (seen at X60 running with ubuntu).<br>
 
−
Note: Some users have reported [http://forum.thinkpads.com/viewtopic.php?p=201279&sid=787564d7cf9de5d7d76b0cb312a98c61 latency problems] with e1000 driver. It seems, that [http://agenda.clustermonkey.net/index.php/Tuning_Intel_e1000_NICs switching off Interupt Throttle Rate (ITR)] helps. <br>
 
−
Note: [http://support.intel.com/support/network/sb/CS-009209.htm Additional configuration options from Intel]<br/>
 
−
Note: Another possibility is to use "RxIntDelay=5".<br/>
 
−
Note: How to repair a destroyed eeprom because of the e1000 Kernel bug (Kernel 2.6.27) -> [http://tournament.de/howtos/x200_pxe_e05.html link PXE-E05]
 
−
 
−
For Gentoo users - compile e1000 as a kernel module and add 'options e1000 InterruptThrottleRate=0,0' to /etc/modules.d/e1000
 
−
 
−
I had serious performance problems on Ubuntu Edgy (ca. 400 kb/s File transfer rate).
 
−
I compiled version e1000-7.3.20 from http://sourceforge.net/projects/e1000/ and this solved my problem.
 
−
All other hints above did not improve the file transfer performance (they did improve the ping latency) for me.
 
  
 
=== Broadcom Fast Ethernet (10/100) ===
 
=== Broadcom Fast Ethernet (10/100) ===

Revision as of 13:15, 12 March 2009

Internal Ethernet controller

A variety of Ethernet controllers is integrated into almost all models starting with the introduction of the A, T and X series.

The Ethernet controller is located on either a MiniPCI card, Communications Daughter Card (CDC), or integrated on the systemboard.

3COM Fast Ethernet (10/100)

MiniPCI cards featuring this chip:

Intel Fast Ethernet (10/100)

Driver: e100

CDC and MiniPCI cards featuring this chip:

In addition, this chip is integrated into select systemboards of the following machines:
Intel 82550GY

Intel 82558

Intel 82562ET

Intel 82562EZ

Intel Gigabit (10/100/1000)

Chipset: Intel PRO/1000 MT Mobile Ethernet
Driver: e1000

This chip is integrated into select systemboards of the following machines:
Intel 82540EP

Intel 82541GI

Intel Gigabit (10/100/1000) PCI-Express

Driver: e1000e Intel 82573L (PCI-Express)

Intel 82566MM (PCI-Express) (w/ Intel Active Management Technology (AMT))

Intel 82567LM (PCI-Express) (w/ Intel Active Management Technology (AMT))

Broadcom Fast Ethernet (10/100)

Driver: tg3 or bcm5700

This chip is integrated into select systemboards of the following machines:
Broadcom BCM5901

Broadcom BCM5751F

Broadcom Gigabit (10/100/1000)

Driver: tg3 or bcm5700

This chip is integrated into select systemboards of the following machines:

Broadcom BCM5752M

Broadcom BCM5751M

Note: There are some problems with the driver since kernel 2.6.17 (at least on a Z61p, Z61m). After an ifdown && ifup it doesn't work anymore. A possible workaround is to build the tg3-driver as a module and reload it when this problem occours. (Adding pre-up modprobe tg3 and post-down rmmod tg3 to the corresponding section in /etc/network/interfaces works fine.) Rebooting the machine would also be possible. This is fixed in kernel 2.6.19-rc5.

The T43 with a stock Linux 2.6.18.1 kernel does not have any problems.

Retrieved from "https://www.thinkwiki.org/w/index.php?title=Ethernet_Controllers&oldid=42119"