Difference between revisions of "Installing Ubuntu on a ThinkPad 750P"
(Major Fail.) |
(Actual howto started. Checkpoint.) |
||
| Line 2: | Line 2: | ||
---- | ---- | ||
==Introduction== | ==Introduction== | ||
| − | The | + | The goal: A modern Linux on an old machine. The result: Success! Well, moderate success, and hopefully more tweaks to come to get it as good as it can be. I have a 750P but the steps here apply to any 750 series machine. If we ever get the X Window System working, let's call out special varietal sections if needed (he said, suspecting he's the only loon who would even try to use a machine this old any more). |
| + | |||
| + | The alleged absolute minimum requirements for Ubuntu as of today (December 22, 2007) are a 486 CPU with floating point, 32MB RAM and around 400MB of disk. The 750 series has 4MB RAM built in and you'll need a 32MB IC DRAM card, which are getting rare. The 750 can natively handle hard drives up to 8GB in size, and will work with larger drives as long as your boot partition is in that first 8GB. | ||
| + | |||
| + | You will also need a PCMCIA network card that is supported by the Ubuntu installer. I happen to have a LinkSys PCMPC100, but many cards are supported. | ||
| + | |||
| + | ==Installing== | ||
| + | There are some major hurdles to clear just to get the installer to run. | ||
| + | * The 750 will only boot from the floppy drive or its hard drive. It appears it could boot from a network card, if it's a special IBM network card, but I don't have one. | ||
| + | * Ubuntu is meant to be run from CD. | ||
| + | * The netboot files for Feisty (7.04) and Gutsy (7.10) crash on this machine. | ||
| + | |||
| + | Fortunately there are ways to surmount the obstacles. | ||
| + | * Ubuntu provides a netboot installer which requires only two files that total less than 10MB, so they can fit on a few floppies. | ||
| + | * You can install other OSes easily with just the floppy drive. | ||
| + | |||
| + | I tried two ways to install Ubuntu. First, I took the example of the thisiscool.com fcfloppy package that takes the Fedora Core netboot and packages that onto floppies. I made a set for Gutsy, but that crashes. It should work for Edgy, but I haven't made those diskettes, and I don't want to make and distribute them because I'd have to distribute source. If we can get them hosted at the Ubuntu wiki, that would be great, and I will gladly provide my scripts. | ||
| + | |||
| + | The second way I actually finished was to first install Woody (see my guide on ThinkWiki), then downloaded the 386 netboot files for Edgy, and used Lilo to load them and start the installer. | ||
| + | |||
| + | Since this is my first Ubuntu install that required more than clicking next, I'm going to go into detail. The process takes at least 9 hours, but you don't have to babysit it. | ||
| + | |||
| + | === Preparation === | ||
[[Category:750]] [[Category:750Cs]] [[Category:750C]] [[Category:750P]] | [[Category:750]] [[Category:750Cs]] [[Category:750C]] [[Category:750P]] | ||
[[Category:Ubuntu]] | [[Category:Ubuntu]] | ||
Revision as of 18:39, 22 December 2007
Contents
Introduction
The goal: A modern Linux on an old machine. The result: Success! Well, moderate success, and hopefully more tweaks to come to get it as good as it can be. I have a 750P but the steps here apply to any 750 series machine. If we ever get the X Window System working, let's call out special varietal sections if needed (he said, suspecting he's the only loon who would even try to use a machine this old any more).
The alleged absolute minimum requirements for Ubuntu as of today (December 22, 2007) are a 486 CPU with floating point, 32MB RAM and around 400MB of disk. The 750 series has 4MB RAM built in and you'll need a 32MB IC DRAM card, which are getting rare. The 750 can natively handle hard drives up to 8GB in size, and will work with larger drives as long as your boot partition is in that first 8GB.
You will also need a PCMCIA network card that is supported by the Ubuntu installer. I happen to have a LinkSys PCMPC100, but many cards are supported.
Installing
There are some major hurdles to clear just to get the installer to run.
- The 750 will only boot from the floppy drive or its hard drive. It appears it could boot from a network card, if it's a special IBM network card, but I don't have one.
- Ubuntu is meant to be run from CD.
- The netboot files for Feisty (7.04) and Gutsy (7.10) crash on this machine.
Fortunately there are ways to surmount the obstacles.
- Ubuntu provides a netboot installer which requires only two files that total less than 10MB, so they can fit on a few floppies.
- You can install other OSes easily with just the floppy drive.
I tried two ways to install Ubuntu. First, I took the example of the thisiscool.com fcfloppy package that takes the Fedora Core netboot and packages that onto floppies. I made a set for Gutsy, but that crashes. It should work for Edgy, but I haven't made those diskettes, and I don't want to make and distribute them because I'd have to distribute source. If we can get them hosted at the Ubuntu wiki, that would be great, and I will gladly provide my scripts.
The second way I actually finished was to first install Woody (see my guide on ThinkWiki), then downloaded the 386 netboot files for Edgy, and used Lilo to load them and start the installer.
Since this is my first Ubuntu install that required more than clicking next, I'm going to go into detail. The process takes at least 9 hours, but you don't have to babysit it.
