Talk:Rescue and Recovery

"It is not known how to invoke Rescue and Recovery once GRUB has been installed in the master boot record."

See ftp://ftp.software.ibm.com/pc/pccbbs/thinkvantage_en/tvtrnr3_1027en.txt, Consideration 6:

 The Master Boot Record (MBR) must be configured properly for the 
 Rescue and Recovery application to function properly.  When possible, 
 the Rescue and Recovery application attempts to ensure the proper 
 configuration of the MBR.  This can only occur if the Rescue and 
 Recovery application is installed after other applications that 
 requires the MBR.

Apparently the R and R uses some very specific stuff in the MBR. Maybe Google will help you find some further info (has someone ever looked at the R and R enabled MBR in depth?)

Paul Bolle 13:43, 9 Oct 2005 (CEST)

---

Having special data in the MBR means less room for code, which may explain why the preinstalled MBR ignores the Active bit and (as far as I can tell) always boots the first partition. The latter means GRUB can't be installed in a partition boot sector either...

--Thinker 14:06, 9 Oct 2005 (CEST)

---

Why not? If the RnR-MBR always boots the first partition, just go back to the classical recommended partition layout (from the times that LILO didn't support LBA) and create a tiny first partition (that you can i.e. use as /boot partition, which has certain advantages). Install grub into that partition.

Wyrfel 14:44, 9 Oct 2005 (CEST)

---

I saw posts about the R&R software (or at least some versions thereof) assuming that the Windows partition is the first one.

--Thinker 14:52, 9 Oct 2005 (CEST)

---