Difference between revisions of "Installing Gentoo on a ThinkPad X1carbon"

From ThinkWiki
Jump to: navigation, search
(Gentoo installation on X1 Carbon)
 
m (USB ethernet dongle U2L100P-Y1)
 
(9 intermediate revisions by the same user not shown)
Line 1: Line 1:
Link to X1 main page [[Category:X1]]
+
 
 +
Specific installation notes for {{Gentoo}} on the ThinkPad {{X1}}.
 +
 
 +
Link to X1 main page [http://www.thinkwiki.org/wiki/Category:X1 X1 main page] (with standard features list)
 +
 
 +
== USB ethernet dongle U2L100P-Y1 ==
 +
This is the dongle that Lenovo ships with the X1. The device does not work out-of-the-box with 3.5.7-gentoo, but it is seen by dmesg as
 +
AX88772B and by {{cmdroot|lsusb}}
 +
        # lsusb
 +
        Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
 +
        Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
 +
        Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
 +
        Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
 +
        Bus 001 Device 035: ID 17ef:6009 Lenovo ThinkPad Keyboard with TrackPoint
 +
        Bus 001 Device 003: ID 147e:2020 Upek TouchChip Fingerprint Coprocessor (WBF advanced mode)
 +
        Bus 001 Device 034: ID 0a5c:21e6 Broadcom Corp. BCM20702 Bluetooth 4.0 [ThinkPad]
 +
        Bus 001 Device 005: ID 04f2:b315 Chicony Electronics Co., Ltd
 +
        Bus 002 Device 011: ID 17ef:7203 Lenovo
 +
 
 +
{{cmdroot|make menuconfig}} and enable the following (need usbnet support):
 +
 
 +
            Device Drivers  --->
 +
        [*] Network device support  --->
 +
              USB Network Adapters  --->
 +
        <M> Multi-purpose USB Networking Framework
 +
        <M>  ASIX AX88xxx Based USB 2.0 Ethernet Adapters
 +
Then {{cmdroot|make && make modules_install}}
 +
 
 +
Get the driver from
 +
http://www.asix.com.tw/download.php?sub=driverdetail&PItemID=105 (need ver>=4.4.1)
 +
 
 +
Unzip, edit asix.c and add the device id 0x17ef:0x7203 if it's missing
 +
 
 +
        static const struct usb_device_id    products [] = {
 +
            USB_DEVICE (0x04f1, 0x3008),
 +
            .driver_info = (unsigned long) &ax8817x_info,
 +
        }, {
 +
            // Lenovo 10/100
 +
            USB_DEVICE (0x17ef, 0x7203),
 +
            .driver_info = (unsigned long) &ax88772_info,
 +
        }, {
 +
            // ASIX AX88772B 10/100
 +
            USB_DEVICE (0x0b95, 0x772b),
 +
            .driver_info = (unsigned long) &ax88772_info,
 +
 
 +
 
 +
Then
 +
        make && make install
 +
        modprobe asix

Latest revision as of 23:24, 10 January 2013

Specific installation notes for Gentoo on the ThinkPad X1.

Link to X1 main page X1 main page (with standard features list)

USB ethernet dongle U2L100P-Y1

This is the dongle that Lenovo ships with the X1. The device does not work out-of-the-box with 3.5.7-gentoo, but it is seen by dmesg as AX88772B and by # lsusb

       # lsusb
       Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
       Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
       Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
       Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
       Bus 001 Device 035: ID 17ef:6009 Lenovo ThinkPad Keyboard with TrackPoint
       Bus 001 Device 003: ID 147e:2020 Upek TouchChip Fingerprint Coprocessor (WBF advanced mode)
       Bus 001 Device 034: ID 0a5c:21e6 Broadcom Corp. BCM20702 Bluetooth 4.0 [ThinkPad]
       Bus 001 Device 005: ID 04f2:b315 Chicony Electronics Co., Ltd 
       Bus 002 Device 011: ID 17ef:7203 Lenovo

# make menuconfig and enable the following (need usbnet support):

           Device Drivers  --->
       [*] Network device support  --->
             USB Network Adapters  --->
       <M> Multi-purpose USB Networking Framework
       <M>   ASIX AX88xxx Based USB 2.0 Ethernet Adapters

Then # make && make modules_install

Get the driver from http://www.asix.com.tw/download.php?sub=driverdetail&PItemID=105 (need ver>=4.4.1)

Unzip, edit asix.c and add the device id 0x17ef:0x7203 if it's missing

       static const struct usb_device_id    products [] = {
            USB_DEVICE (0x04f1, 0x3008),
            .driver_info = (unsigned long) &ax8817x_info,
        }, {
           // Lenovo 10/100
           USB_DEVICE (0x17ef, 0x7203),
           .driver_info = (unsigned long) &ax88772_info,
       }, {
            // ASIX AX88772B 10/100
            USB_DEVICE (0x0b95, 0x772b),
            .driver_info = (unsigned long) &ax88772_info,


Then

        make && make install
        modprobe asix