Difference between revisions of "Installing Ubuntu 7.10 on a ThinkPad Z61m"

From ThinkWiki
Jump to: navigation, search
(←Created page with '= Lenovo ThinkPad {{Z61m}} (9452-CTO) = == Hardware Details == * Intel Core 2 Duo T7200 (2 GHz, 4 MB L2, 667MHz FSB) * 1 GB RAM (2x 512MB PC2-5300 DDR2 667MHz) * ...')
 
(→‎Fingerprint reader)
 
(One intermediate revision by one other user not shown)
Line 10: Line 10:
 
* Intel [[AD1981HD]] High Definition Audio 1.0 controller with 2 speakers
 
* Intel [[AD1981HD]] High Definition Audio 1.0 controller with 2 speakers
 
* [[Intel PRO/Wireless 3945ABG Mini-PCI Express Adapter]]
 
* [[Intel PRO/Wireless 3945ABG Mini-PCI Express Adapter]]
−
* [[Ethernet_Controllers#Broadcom_Gigabit_.2810.2F100.2F1000.29|Broadcom Gigabit Ethernet Controller]]
+
* [[Broadcom Gigabit Ethernet (10/100/1000)]]
 
* [[ThinkPad 56K Modem (MDC-1.5)]]
 
* [[ThinkPad 56K Modem (MDC-1.5)]]
 
* [[ThinkPad Bluetooth with Enhanced Data Rate (BDC-2)]]
 
* [[ThinkPad Bluetooth with Enhanced Data Rate (BDC-2)]]
Line 161: Line 161:
  
 
== Fingerprint reader ==
 
== Fingerprint reader ==
−
You can use the fingerprint reader to authenticate via PAM. I recommend to use the instruction given at [[How_to_enable_the_fingerprint_reader_with_ThinkFinger|How to enable the fingerprint reader with ThinkFinger]].
+
You can use the fingerprint reader to authenticate via PAM. See [[How to enable the integrated fingerprint reader]].
  
 
= lspci =
 
= lspci =

Latest revision as of 16:36, 5 August 2011

Lenovo ThinkPad Z61m (9452-CTO)

Hardware Details

Operating System

Ubuntu 7.10 'feisty fawn'. See the Ubuntu Laptop Testing Team for up-to-date details.

What works out-of-the-box

Hardware

  • 100 GB SATA, 7200 RPM
  • DVD Super Multiburner
  • Intel AD1981HD High Definition Audio 1.0 controller with 2 speakers
  • Intel PRO/1000 Gigabit Ethernet
  • ThinkPad Bluetooth with Enhanced Data Rate (BDC-2)
  • 3x USB 2.0
  • Firewire
  • UltraNav
  • Headphone Jack
  • Microphone Jack
  • Built-in Microphone

Power Management

  • CPU speed stepping
  • LCD Brightness depending on current power scheme
  • Screen brightness control with Fn+Pos1/Fn+End
  • Lid switch

Extra Keys

  • Volume up, Volume down, Mute
  • Fn+Pg up (ThinkLight)
  • Front wireless radio switch (turns off Wifi and Bluetooth)
  • Fn+F2 (Lock acount)
  • Fn+F3 (Show power manager information pop-up)
  • Fn+F5 (activate/deactivate WiFi and Bluetooth)

What needs to be configured

See further down this document to find a HowTo for all of these issues.

Hardware

  • ATI Mobility Radeon X1400 (128 MB)
  • IrDA 1.1 (FIR - 4Mbps)
  • Integrated Fingerprint Reader

Extra keys

These keys have no assignment by default.

  • Windows key (Keycode Super_L)
  • Context menu key (Keycode 0xe3)
  • ThinkVantage button (Keycode 0x9f)
  • Web browser back (Keycode 0xea)
  • Web browser forward (Keycode 0xe9)
  • Multimedia Keys (Fn+up, Fn+down, Fn+left arrow, Fn+right arrow)

What does not work at all

  • Suspend to RAM (Fn+F4 works though)
  • Hibernate (Fn+F12 works though)

Untested

Hardware

  • ThinkPad 56K Modem (MDC-1.5)
  • VGA out
  • S-Video out
  • CardBus slot (Type 2)
  • ExpressCard slot (54 or 34)
  • UltraBay Enhanced

Installing gutsy gibbon

ATI's video driver fglrx (up to at least version 8.42.3) has a serious bug in it which prevents the computer to suspend or hibernate correctly. The hibernate LED will flash indefinitely without the computer ever to shut down. This problem is well known, but without a fix from ATI (which is yet to be released) suspend and hibernate simply won't work. If you can do without 3D hardware acceleration, try the open-source mesa driver (which means, simply do not install fglrx).

Solutions

ATI Mobility Radeon X1400 (128 MB)

To get hardware acceleration and a resolution >1024x768, you need to install ATI's fglrx driver.

1. Install the fglrx driver:

$ sudo apt-get install xorg-driver-fglrx

2. Update loaded modules:

$ sudo depmod -a

3. Now configure the fglrx driver:

$ sudo aticonfig --initial

$ sudo aticonfig --overlay-type=Xv

4. After restarting your system (or alternatively doing Ctrl+Alt+Backspace to restart the X Server) your system will be running the fglrx drivers.

Blue-ish videos

If you experience that some videos are played with a blue cast, do the following to play back videos in normal color:

1. Open the gstreamer properties $ sudo apt-get install gstreamer-properties

2. In the video tab, select as Plugin Custom and replace the text in forward with: 

ffmpegcolorspace ! video/x-raw-yuv,format=(fourcc)YV12 ! xvimagesink

IrDA 1.1 (FIR - 4Mbps)

IrDA does not work out-of-the-box because the necessary package and configuration is not included in a stock Ubuntu install.

1. Install the missing package $ sudo apt-get install irda-utils

2. Configure irda-utils

$ sudo dpkg-reconfigure irda-utils

3. On the configure screen set the options as the following: 

Activate IrDa on boot-up: yes
Attempt to probe for IrDa at system boot: yes
Discovery mode: yes
Typ of the IrDa-adaptor: native
Typ of the FIR-chip: nsc-ircc
Options for the modules of the FIR-chip:
Port for setserial to deactivate:

4. Restart IrDA:

$ sudo /etc/init.d/irda-utils stop

$ sudo /etc/init.d/irda-utils start

5. Load the FIR IrDA driver:

$ sudo modprobe irda0

6. Now test if activating IrDA was successful. Place your IrDA device (mobile phone, PDA or whatever) in front of the IrDA eye and activate IrDA on your device. Doing a

$ cat /proc/net/irda/discovery

should list your IrDA device.

Fingerprint reader

You can use the fingerprint reader to authenticate via PAM. See How to enable the integrated fingerprint reader.

lspci

00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express PCI Express Root Port (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controller AHCI (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility X1400
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5752M Gigabit Ethernet PCI Express (rev 02)
03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
15:00.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
15:00.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller
15:00.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
15:00.3 Generic system peripheral [0805]: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller
Retrieved from "https://www.thinkwiki.org/w/index.php?title=Installing_Ubuntu_7.10_on_a_ThinkPad_Z61m&oldid=52657"