Difference between revisions of "1859-4AU"
(→Installing Fedora Core 5) |
(→Installing Fedora Core 5) |
||
| Line 35: | Line 35: | ||
It is possible to get suspend working with DRI; I hope to soon provide a working dual head xorg.conf that allows resume from suspend. | It is possible to get suspend working with DRI; I hope to soon provide a working dual head xorg.conf that allows resume from suspend. | ||
| + | * Installation: after reboot, one setting is a choice for default PCM device. The two options are: | ||
| + | Intel ICH - Intel ICH6 | ||
| + | Intel ICH - IEC958 | ||
| + | I have no idea which to choose, and don't know if the choice is one that can easily be changed later. | ||
| + | I will choose the first and hope for the best. | ||
Thinkpad Family: {{R52}} | Thinkpad Family: {{R52}} | ||
[[Category:Models]] | [[Category:Models]] | ||
Revision as of 10:04, 22 April 2006
Hardware Specifications of Thinkpad R52 Machine Type 1859-4AU
- Processor:
- Intel Pentium M (Dothan) 1.73 GHz
- Video Adapter:
- Display
- 15.0" TFT display with resolution of 1400x1050 on Intel 915GM
- 512 MB PC2-4200 CL4 NP DDR2 (533 MHz) SDRAM SODIMM memory standard, supports up to 2GB maximum memory.
- 60 GB 4200 rpm IDE HDD
- AD1981B AC'97 Audio controller
- UltraBay Enhanced with the following:
- CD-RW/DVD-ROM Combo drive : 24x24x24x/8x CD-RW/DVD
- Broadcom 10/100/1000 Ethernet
- CDC slot with:
- MiniPCI slot with one of the following: (not sure)
- CardBus slot (Type 2)
- ExpressCard/54 slot
- IBM Embedded Security Subsystem 2.0
- IBM Active Protection System
- FireWire (IEEE1394)
Thinkpad Hardware Maintenance Manual
- ThinkPad R50e, R51e, R52 - Hardware Maintenance Manual (August 2005) (4,398,428 Bytes)
Installing Fedora Core 5
- Getting suspend and resume to work: (2006.04.20)
- Check BIOS setting: Power On; Press F1 to enter BIOS settings. Check that the value for Config -> Power -> "Allow suspend mode on legacy OS" is: Enabled
- If on resume the video is not restored, edit the file /etc/X11/xorg.conf, find the section "Module" and comment out the line that says load "DRI" by putting a hash mark # at the beginning of the line:
# load "DRI"
It is possible to get suspend working with DRI; I hope to soon provide a working dual head xorg.conf that allows resume from suspend.
- Installation: after reboot, one setting is a choice for default PCM device. The two options are:
Intel ICH - Intel ICH6 Intel ICH - IEC958
I have no idea which to choose, and don't know if the choice is one that can easily be changed later. I will choose the first and hope for the best.
Thinkpad Family: R52
