Search results
Create the page "I c-Y" on this wiki! See also the search results found.
- ...the order in which these two firmwares should be updated. When in doubt (i.e. IBM didn't provide specific instructions for your model or a particular 4. Run the HP tool, select the USB device, I used FAT32, create a DOS bootable disk and point at the win98boot folder -29 KB (4,865 words) - 23:12, 26 February 2022
- ...XFree86 4.x is in progress. The driver however doesn't support all cards, i can't say if it supports the supersavage. I had some trouble with X hanging up when switching twice to the terminal and11 KB (1,973 words) - 16:55, 30 August 2008
- In this example, I tell it to invoke the script <tt>~/toggle-touchpad.sh</tt>, which you can c ...mode changes, that there is a GSettings key that also is at play here. As I soon discovered, the GSettings key will actually determine if any changes v13 KB (1,880 words) - 03:30, 29 January 2013
- [[User:Jdthood|I]] installed Ubuntu 11.04 (Natty Narwhal) on a ThinkPad {{X220}}, model 4290 I have since upgraded to Ubuntu 11.10 (Oneiric Ocelot) and have updated some23 KB (3,256 words) - 00:42, 26 March 2020
- I made several attempts to get this card working under x.org, with no success I managed once to get the PCI card alone working after switching the primary4 KB (640 words) - 08:41, 24 October 2006
- At first download the BIOS ISO from the IBM support site. I used following one for my {{R60}}: [http://www-307.ibm.com/pc/support/site. ...aded image: LOGO.MOD, LOGO.SCR ( i've added also LOGO.BMP and LOGO.LOG but i don't think that they are needed ).15 KB (2,321 words) - 18:39, 21 January 2011
- ...mand. The description reads pretty much like what's needed for APS, though I don't want to drop my almost new TP just to field-test it. ...n at rest in normal upright position with base parallel to the ground. As I gently tilt the T42 through all possible x or y angles, the values range fr8 KB (1,264 words) - 16:02, 22 January 2021
- ...lower-power ACPI states (a.k.a. C-states). To eliminate the noise maximum (i.e. lowest power) C-state had to be limited to C2. In {{path|/etc/sysfs.conf ...er instead? Madwifi would not allow me to connect to 5+ wireless networks I had access to. So, if you too have this problem, try ndiswrapper, if not,14 KB (2,010 words) - 15:07, 21 January 2011
- ...ed-notification''': Pidgin plugin to use any LED to indicate new messages. I've forked [http://github.com/Sitwon/led-notification led-notification] to s7 KB (983 words) - 16:05, 22 January 2021
- I tested both, APM and ACPI but settled with ACPI which now works like a char5 KB (814 words) - 21:36, 6 January 2017
- ...e and which Power Management features it supports use the '''-i''' and '''-I''' parameters.3 KB (423 words) - 06:11, 25 May 2006
- ACPI puts the processor into the C3 or C4 power saving states (i.e., the system is idle). ...the two ACPI modules "processor" and "thermal" (depends on the first one). I have no clue, why. Anyone with similar experiences?22 KB (3,464 words) - 03:09, 22 January 2014
- ...ntu 9.04 on a R50p and it allows for the screen to run in 1600x1200, which I could not get the VESA driver to do. I recently experienced this problem; in my case it sometimes also failed to b9 KB (1,597 words) - 16:40, 16 November 2016
- ...y 750P. I leave this page as a starting point for those more intrepid than I. --[[User:Whizkid|Whizkid]] 17:38, 3 Apr 2005 (CEST) ...r are thinking about what these machines can do. Well, they can run Linux. I plan to make mine an SMB file and print server.5 KB (950 words) - 12:20, 20 January 2006
- ...pting for debian, but gentoo's self building all packages caught my eye so i had to try it out for real. ...X server crash on me once. I do however warn against using 2.6.11 kernels, I have had nothing but problems with them.34 KB (5,558 words) - 15:49, 20 October 2006
- ...onfigure the right thresholds. For reference, this is the /etc/tpfand.conf I use for my X200:10 KB (1,551 words) - 17:06, 16 February 2011
- # rename it to something more meaningful (i.e. acpid.conf) and these lines to # The easiest way I have found is to do it via amixer.10 KB (1,527 words) - 15:49, 19 September 2010
- ...ly set the trip temp to 97 degrees, and set battery to the same as AC, and i see good performance AND battery life) * Thinkpad (i) LED is unknown_led2 in thinkpad_acpi3 KB (430 words) - 04:32, 18 May 2020
- Note: I upgraded BIOS to latest version (1.18) but still no luck. OpenGL (DRI?) har2 KB (354 words) - 14:01, 22 January 2021
- *[T] - S for Standard (vs A for Auto for example) - I don't know what this mean :) *[rr] is the first two digits of speed in RPM, i.e. 54 for 5400 RPM.13 KB (1,487 words) - 17:11, 28 June 2016