Difference between revisions of "Serial Ultrabay Slim HDD Adapter II"

From ThinkWiki
Jump to: navigation, search
Line 32: Line 32:
 
=== Installation ===
 
=== Installation ===
  
Screw 4 screws in the mounting holes of the hard disk / solid state drive. Slide the screw heads under the plastic notches while plugging in the drive in the Ultrabay adapter. Finally, close the black plastic lever to prevent the drive from sliding backwards.
+
Screw 4 screws in the mounting holes of the hard disk / solid state drive.  
 +
 
 +
[[image:Hdd-screws.jpg]]
 +
 
 +
Slide the screw heads under the plastic notches while plugging in the drive in the Ultrabay adapter.  
 +
 
 +
[[image:Ultrabay-plastic-notches.jpg]]
 +
 
 +
Finally, close the black plastic lever to prevent the drive from sliding backwards.
  
 
===External Links===
 
===External Links===

Revision as of 16:46, 10 May 2011

Ultrabay Slim ThinkPad Serial Hard Drive Bay Adapter III

This is an adapter to connect an additional hard disk drive to the Ultrabay Slim.

Features

  • Takes any SATA 9.5mm thick, 2.5" HDD/SSD.
  • If used in a Serial Ultrabay Enhanced, it will also accept 12.7mm high drives.


Ultrabay Slim ThinkPad Serial Hard Drive Bay Adapter III

NOTE!
This SATA HDD adapter only works with select ThinkPads as listed below. For other machines with UltraBay Slim, use the PATA base UltraBay Slim HDD Adapter or the previous Ultrabay Slim SATA HDD Adapter or Ultrabay Slim SATA HDD Adapter II instead.

Part numbers

  • Marketing PN: 43N3412
  • FRU PN:

Linux support

If connected at boot time then the drive is normally /dev/sdb

Supported with

Installation

Screw 4 screws in the mounting holes of the hard disk / solid state drive.

Hdd-screws.jpg

Slide the screw heads under the plastic notches while plugging in the drive in the Ultrabay adapter.

Ultrabay-plastic-notches.jpg

Finally, close the black plastic lever to prevent the drive from sliding backwards.

External Links