Difference between revisions of "Qualcomm Gobi 2000"

From ThinkWiki
Jump to: navigation, search
(GPS: patch is in kernel, now.)
(added category)
 
(27 intermediate revisions by 5 users not shown)
Line 28: Line 28:
  
 
== Firmware ==
 
== Firmware ==
The firmware for this device is not publicly downloadable and currently must be obtained from a windows installation. The firmware consists of 3 parts:
+
The firmware for this device is not publicly downloadable. It consists of 3 files:
 
* amss.mbn (firmware stage 1)
 
* amss.mbn (firmware stage 1)
 
* apps.mbn (firmware stage 2)
 
* apps.mbn (firmware stage 2)
* UQCN.mbn (formware stage 3) - includes configuration and carrier specific settings)
+
* UQCN.mbn (firmware stage 3 - includes configuration and carrier specific settings)
  
Default location for the firmware can be found in the following directory:
+
=== Obtaining the Firmware ===
* C:\Program Files (x86)\QUALCOMM\Images\Lenovo
+
There are two ways of obtaining the firmware files:
 +
# From the pre-installed Lenovo Windows installation. Or from a clean Windows installation in a virtualizer that supports USB after installing the {{LNVDOCURL|DS001302|Qualcomm Gobi 2000 Wireless WAN Driver}}. The default location for the firmware files is {{path|C:\Program Files (x86)\QUALCOMM\Images\Lenovo\}}
 +
# Using Wine to execute the {{LNVDOCURL|DS001302|Qualcomm Gobi 2000 Wireless WAN Driver}} installer that simply unpacks the real installer named GobiInstaller.msi. Then just extract[http://sysblogd.wordpress.com/2008/05/10/howto-extract-all-files-from-microsoft-installer-files-msi-rather-than-to-install-the-package/] the firmware images from the MSI file by {{cmduser|wine msiexec /a ~/.wine/drive_c/DRIVERS/WWANQL/Driver/GobiInstaller.msi /qb TARGETDIR<nowiki>=</nowiki>C:\\DRIVERS\\GOBI}}.
 +
{{HINT|For enabling GPS, you will need a Windows installation with the Qualcomm Gobi 2000 Wireless WAN Driver installed, anyhow.}}
  
MD5 SUM of known firmware files:
+
=== Choosing the Right Firmware ===
* 84d002b0ef003cde6c95826bfbf067fe  /lib/firmware/gobi/amss.mbn (STAGE 1, tested with UK T510, O2 SIM)
 
* d7496085f1af3d1bfdf0fa60c3222766  /lib/firmware/gobi/apps.mbn (STAGE 2, tested with UK T510, O2 SIM)
 
* 1aa5727b034dd1f371a3412d5800c1a3  /lib/firmware/gobi/UQCN.mbn (STAGE 3, UMTS unlocked, tested with UK T510, O2 SIM)
 
  
I am experimenting on an alternative way, described on the discussion page. [[User:Sebi|Sebi]] 15:08, 15 March 2010 (UTC)
+
The firmware images are located in 11 directories. In general, each "officially" supported carrier has its own directory, as depicted in table "Firmware Images". The revision can be found in every file. The amms and apps files have the same revision and this one is reported by the {{cmd|AT I|}} command. The internal name of the UQCN file shows whether the firmware is for UMTS or CDMA2000. If your UMTS carrier is not listed, the default firmware and the generic UMTS firmware should work as their revisions match. The table "Non-listed Carrier Compatibility" summarizes the experiences of the Talk page.
  
The method you describe on the talk page is in fact the same method I used to obtain these files mentioned above. We should complete the table on the talk page with information and MD5 sums for all 12 firmware options, and place it on this page, along with instructions for both methods to obtain the files. [[User:Catphish|Catphish]]
+
{| {{prettytable}}
 +
|+Firmware Images (Version 1.1.250/2.0.7.4 (7XWC48WW) Released 2011-07-05)
 +
! Dir  !! Carrier          !! Image    !! MD5 message digest              !! Revision            !! Internal UQCN name
 +
|-
 +
| 0    || Vodafone
 +
|
 +
amss.mbn <br />
 +
apps.mbn <br />
 +
UQCN.mbn
 +
|
 +
691a4da480076e239e8bfcfcd817d0de <br />
 +
661249ddae2b63e2eaac93594a21e409 <br />
 +
cbae9a769f459b77910c2bbdf8a8c464
 +
| D1025-STUTABFD-3604 || 02-umts_vod-01024-014
 +
|-
 +
| 1    || Verizon
 +
|
 +
amss.mbn <br />
 +
apps.mbn <br />
 +
UQCN.mbn
 +
|
 +
06f76ed398458dad7b91c2d99a85a0a7 <br />
 +
88a60ed745d75fb1b92c539574ecc972 <br />
 +
e4d8d4dbd0a10d17f01f7f3bbd2ea734
 +
|
 +
D1055-STUTDSVD-3580 <br />
 +
D1055-STUTDSVD-3580 <br />
 +
D1055-UQCNDSVD-2021
 +
| 02-c2k_vzw-00256-021
 +
|-
 +
| 2    || AT&T            || UQCN.mbn || 19eaec6cea1dc9b702b429dcb6032aa4 || D1025-UQCNASDD-2016 || 02-umts_att-00768-016
 +
|-
 +
| 3    || Sprint
 +
|
 +
amss.mbn <br />
 +
apps.mbn <br />
 +
UQCN.mbn
 +
|
 +
d25f247cbe0fa481378d9f92c65c3e5e <br />
 +
46fcb2423c31fd96e4645a90956264d2 <br />
 +
025293e44bd7f6a7800aa7eec9a00dad
 +
|
 +
D1055-STUTCSFD-3710 <br />
 +
D1055-STUTCSFD-3710 <br />
 +
D1055-UQCNCSFD-2025
 +
| 02-c2k_sprint-00512-025
 +
|-
 +
| 4    || T-Mobile        || UQCN.mbn || b186fe81731e17e59ca16b92cb2069b6 || D1025-UQCNABLD-2011 || 02-umts_tmo-01280-011
 +
|-
 +
| 6    || Generic UMTS    || UQCN.mbn || bdf27325ebb63251c1310cd3a8f7bab6 || D1025-STUTABGD-3600 || 02-umts_gen-02304-018
 +
|-
 +
| 7    || Telefónica      || UQCN.mbn || 0e38dc59f7b3891b3605d9120a0ab149 || D1025-UQCNABHD-2012 || 02-umts_tellfon-03072-012
 +
|-
 +
| 8    || Telecom Italia  || UQCN.mbn || 0300af5e51c387d64c48db71169b5b23 || D1025-UQCNABID-2011 || 02-umts_telital-03584-011
 +
|-
 +
| 9    || Orange
 +
|
 +
amss.mbn <br />
 +
apps.mbn <br />
 +
UQCN.mbn
 +
|
 +
00c612a8a827dbef746f514e939fa77d <br />
 +
7d12b38ec6851bef5039b74bffffd423 <br />
 +
735db64a57802e252ca4ff05d06b2f10
 +
|
 +
D1025-STUTABOD-3601 <br />
 +
D1025-STUTABOD-3601 <br />
 +
D1025-STUTABOD-3601
 +
| 02-umts_orange-02816-012
 +
|-
 +
| 12   || DoCoMo
 +
|
 +
amss.mbn <br />
 +
apps.mbn <br />
 +
UQCN.mbn
 +
|
 +
4d6203bf9fe8ae1af439d4d163e91596 <br />
 +
385a22740f80c0d00f8acdd9ad637032 <br />
 +
e868df00bfa88596d588a52f872ff703
 +
|
 +
D1025-STUTABED-3587 <br />
 +
D1025-STUTABED-3587 <br />
 +
D1025-UQCNABED-2009
 +
| 02-umts_doco-03328-009
 +
|-
 +
| UMTS || Default Firmware
 +
|
 +
amss.mbn <br />
 +
apps.mbn
 +
|
 +
80fcfbb41a7d4331d4b7145972f5f3c4 <br />
 +
00cbd411048cdadc3e4caf0d89d14fca
 +
|
 +
D1025-STUTABGD-3600 <br />
 +
D1025-STUTABGD-3600
 +
|-
 +
|}
  
I can confirm that the method works from the discussion page --[[User:Aneiser|Aneiser]] 16:22, 18 August 2010 (UTC)
+
{| {{prettytable}}
 +
|+Non-listed Carrier Compatibility
 +
! Dir  !! Image            !! Works with
 +
|-
 +
| 0    || Vodafone        || E-Plus Germany
 +
|-
 +
| 1    || Verizon          ||
 +
|-
 +
| 2    || AT&T            ||
 +
|-
 +
| 3    || Sprint          ||
 +
|-
 +
| 4    || T-Mobile        ||
 +
|-
 +
| 6    || Generic UMTS    || O2 UK? <br /> O2 Germany <br /> Mobitel Slovenia
 +
|-
 +
| 7    || Telefónica      ||
 +
|-
 +
| 8    || Telecom Italia  ||
 +
|-
 +
| 9    || Orange          ||
 +
|-
 +
| 12  || DoCoMo          ||
 +
|-
 +
| UMTS || Default Firmware || UMTS unlocked, O2 UK? <br /> O2 Germany <br /> E-Plus Germany
 +
|-
 +
|}
  
== Firmware loader ==
+
=== Loading the Firmware ===
The firmware for this device must be loaded prior to using the device. The firmware loading interface is exposed over USB as id 05c6:9204 which can be accessed as a character (ttyUSB) device under Linux using the qcserial driver. The firmware can be loaded using the gobi_loader application [http://www.codon.org.uk/~mjg59/gobi_loader/].
+
The firmware for this device must be loaded prior to using the device. It persists in the memory of the device until the next cold boot. Then, it has to be loaded again. The firmware can be loaded automatically via udev using the gobi_loader application[http://www.codon.org.uk/~mjg59/gobi_loader/]. This application expects the firmware image files (amss.mbn, apps.mbn, and UQCN.mbn) in {{path|/lib/firmware/gobi/}}. Thus, create this directory as root, when it does not exist, and copy the appropriate firmware files into the directory. The previous section helps you to obtain the correct files.
 +
 
 +
Technically, the firmware loading interface is exposed over USB as id 05c6:9204 which can be accessed as a character (ttyUSB) device under Linux using the qcserial driver. After successfully loading the firmware, the device switches to the USB id 05c6:9205 and exposes three character devices (ttyUSB).
  
 
== Modem ==
 
== Modem ==
After firmware is loaded, the modem is exposed over USB as id 05c6:9205 which can be accessed as a character (TTYUSB) device under Linux using the qcserial (modified to include correct USB IDs). Normal dial-up software can be used to create a 3G connection.
+
After the firmware is loaded, the modem is exposed over USB as id 05c6:9205 which can be accessed as a character (ttyUSB) device. Normal dial-up software can be used to create a 3G connection.
  
 
== GPS ==
 
== GPS ==
Line 71: Line 195:
 
         echo "\$GPS_STOP"  > /dev/ttyUSB2
 
         echo "\$GPS_STOP"  > /dev/ttyUSB2
  
Preconditions: this has only been tested with and without a 3G SIM card attached to the device and the firmware successfully loaded. It is not necessary though to be connected via 3G to be able to use GPS.
+
{{NOTE|Preconditions: this has only been tested with and without a 3G SIM card attached to the device and the firmware successfully loaded. It is not necessary though to be connected via 3G to be able to use GPS.
Also before you can use "$GPS_START/$GPS_STOP" feature, you need to enable it in Windows ThinkVantage GPS(Auto enable tracking checkbox in Preferences).
+
Also before you can use "$GPS_START/$GPS_STOP" feature, "Auto tracking" has to be enabled in the Options of the {{LNVDOCURL|DS015017|ThinkVantage GPS}} Windows application. The ThinkVantage GPS Windows application works with a clean Windows installation in a virtualizer that supports USB. However, it requires the {{LNVDOCURL|DS001302|Qualcomm Gobi 2000 Wireless WAN Driver}} to be installed.
You will need to enable it only once.
+
You will need to enable it only once.}}
  
 
To verify if the device is in the right mode use gpscat
 
To verify if the device is in the right mode use gpscat
Line 84: Line 208:
 
  $ gpsctl
 
  $ gpsctl
 
  gpsctl: /dev/ttyUSB2 identified as Generic NMEA at 9600
 
  gpsctl: /dev/ttyUSB2 identified as Generic NMEA at 9600
 +
 +
Detection can take a few minutes.
  
 
If gpsd didn't detect the serial port the use the following line:
 
If gpsd didn't detect the serial port the use the following line:
 
  sudo /lib/udev/gpsd.hotplug add /dev/ttyUSB2
 
  sudo /lib/udev/gpsd.hotplug add /dev/ttyUSB2
  
Use xgps or cgps to verify if the GPS has a fix. If it does have a fix you could use [http://www.tangogps.com TangoGPS] or any other GPS tool which uses gpsd.
+
Use xgps or cgps to verify if the GPS has a fix. If it does have a fix you could use [http://www.tangogps.org TangoGPS] or any other GPS tool which uses gpsd.
 +
 
 +
To use GPS for time synchronization add the following lines to /etc/ntp.conf:
 +
server 127.127.28.0 minpoll 4 prefer
 +
fudge  127.127.28.0 time1 0.183 refid NMEA
 +
 
 +
The 0.183 is for [http://en.wikipedia.org/wiki/NMEA_0183 NMEA 0183]
 +
 
 +
If it works it will look like this:
 +
# ntpq -c peers
 +
      remote          refid      st t when poll reach  delay  offset  jitter
 +
==============================================================================
 +
*SHM(0)          .NMEA.          0 l  15  16  317    0.000  -49.965  5.312
  
 
== Carrier specific configurations ==
 
== Carrier specific configurations ==
Line 112: Line 250:
  
 
== Links ==
 
== Links ==
* [http://gobianywhere.com/files/gobi2000_overview.pdf Gobi 2000 Product sheet]
+
* [http://www.gobianywhere.com/sites/default/files/gobi2000_overview.pdf Gobi 2000 Product Sheet]
 +
* [http://mod-book.ru/files/Gobi2k/Documents/AT_Command_Set_Gobi.pdf AT Command Set in Gobi]
 +
* [http://mod-book.ru/files/Gobi2k/Documents/Gobi_Connection_Manager_FAQ.pdf Gobi Connection Manager FAQ]
 +
 
 
== ThinkPads this device may be found in ==
 
== ThinkPads this device may be found in ==
 
'''AT&T service contract may be required'''
 
'''AT&T service contract may be required'''
Line 132: Line 273:
 
* {{W510}}
 
* {{W510}}
 
* {{X100e}}, {{X201}}, {{X201 Tablet}}
 
* {{X100e}}, {{X201}}, {{X201 Tablet}}
 +
 +
[[Category:WWAN Adapters]]

Latest revision as of 15:42, 22 January 2021

Qualcomm Gobi 2000

This is a Qualcomm WWAN Adapter that is installed in a Mini-PCI Express slot

NOTE!
Specific versions of this card may come pre-configured for a certain carrier (AT&T, Verizon, Vodafone UK)

Features

  • Chipset: Qualcomm Gobi 2000
  • USB ID: 05c6:9204 (loader)
  • USB ID: 05c6:9205 (modem)
  • EV-DO/CDMA (800 & 1900Mhz)
  • GSM/GPRS/EDGE (850, 900, 1800 & 1900MHz)
  • HSPA/UMTS (800, 850, 900, 1900 & 2100MHz)
  • GPS, AGPS
  • Up to 7.2Mbps download, 5.76Mbps upload (HSPA/UMTS)
  • Up to 3.1Mbps download, 1.8Mbps upload (EV-DO)
Qualcomm Gobi 2000 WWAN Adapter

Lenovo Partnumbers

  • ThinkPad AT&T® Gobi 2000 Broadband Option 78Y1398
  • ThinkPad Gobi 2000 Broadband Option 78Y1399

Firmware

The firmware for this device is not publicly downloadable. It consists of 3 files:

  • amss.mbn (firmware stage 1)
  • apps.mbn (firmware stage 2)
  • UQCN.mbn (firmware stage 3 - includes configuration and carrier specific settings)

Obtaining the Firmware

There are two ways of obtaining the firmware files:

  1. From the pre-installed Lenovo Windows installation. Or from a clean Windows installation in a virtualizer that supports USB after installing the Qualcomm Gobi 2000 Wireless WAN Driver. The default location for the firmware files is C:\Program Files (x86)\QUALCOMM\Images\Lenovo\
  2. Using Wine to execute the Qualcomm Gobi 2000 Wireless WAN Driver installer that simply unpacks the real installer named GobiInstaller.msi. Then just extract[1] the firmware images from the MSI file by $ wine msiexec /a ~/.wine/drive_c/DRIVERS/WWANQL/Driver/GobiInstaller.msi /qb TARGETDIR=C:\\DRIVERS\\GOBI.
Hint:
For enabling GPS, you will need a Windows installation with the Qualcomm Gobi 2000 Wireless WAN Driver installed, anyhow.

Choosing the Right Firmware

The firmware images are located in 11 directories. In general, each "officially" supported carrier has its own directory, as depicted in table "Firmware Images". The revision can be found in every file. The amms and apps files have the same revision and this one is reported by the AT I command. The internal name of the UQCN file shows whether the firmware is for UMTS or CDMA2000. If your UMTS carrier is not listed, the default firmware and the generic UMTS firmware should work as their revisions match. The table "Non-listed Carrier Compatibility" summarizes the experiences of the Talk page.

Firmware Images (Version 1.1.250/2.0.7.4 (7XWC48WW) Released 2011-07-05)
Dir Carrier Image MD5 message digest Revision Internal UQCN name
0 Vodafone

amss.mbn
apps.mbn
UQCN.mbn

691a4da480076e239e8bfcfcd817d0de
661249ddae2b63e2eaac93594a21e409
cbae9a769f459b77910c2bbdf8a8c464

D1025-STUTABFD-3604 02-umts_vod-01024-014
1 Verizon

amss.mbn
apps.mbn
UQCN.mbn

06f76ed398458dad7b91c2d99a85a0a7
88a60ed745d75fb1b92c539574ecc972
e4d8d4dbd0a10d17f01f7f3bbd2ea734

D1055-STUTDSVD-3580
D1055-STUTDSVD-3580
D1055-UQCNDSVD-2021

02-c2k_vzw-00256-021
2 AT&T UQCN.mbn 19eaec6cea1dc9b702b429dcb6032aa4 D1025-UQCNASDD-2016 02-umts_att-00768-016
3 Sprint

amss.mbn
apps.mbn
UQCN.mbn

d25f247cbe0fa481378d9f92c65c3e5e
46fcb2423c31fd96e4645a90956264d2
025293e44bd7f6a7800aa7eec9a00dad

D1055-STUTCSFD-3710
D1055-STUTCSFD-3710
D1055-UQCNCSFD-2025

02-c2k_sprint-00512-025
4 T-Mobile UQCN.mbn b186fe81731e17e59ca16b92cb2069b6 D1025-UQCNABLD-2011 02-umts_tmo-01280-011
6 Generic UMTS UQCN.mbn bdf27325ebb63251c1310cd3a8f7bab6 D1025-STUTABGD-3600 02-umts_gen-02304-018
7 Telefónica UQCN.mbn 0e38dc59f7b3891b3605d9120a0ab149 D1025-UQCNABHD-2012 02-umts_tellfon-03072-012
8 Telecom Italia UQCN.mbn 0300af5e51c387d64c48db71169b5b23 D1025-UQCNABID-2011 02-umts_telital-03584-011
9 Orange

amss.mbn
apps.mbn
UQCN.mbn

00c612a8a827dbef746f514e939fa77d
7d12b38ec6851bef5039b74bffffd423
735db64a57802e252ca4ff05d06b2f10

D1025-STUTABOD-3601
D1025-STUTABOD-3601
D1025-STUTABOD-3601

02-umts_orange-02816-012
12 DoCoMo

amss.mbn
apps.mbn
UQCN.mbn

4d6203bf9fe8ae1af439d4d163e91596
385a22740f80c0d00f8acdd9ad637032
e868df00bfa88596d588a52f872ff703

D1025-STUTABED-3587
D1025-STUTABED-3587
D1025-UQCNABED-2009

02-umts_doco-03328-009
UMTS Default Firmware

amss.mbn
apps.mbn

80fcfbb41a7d4331d4b7145972f5f3c4
00cbd411048cdadc3e4caf0d89d14fca

D1025-STUTABGD-3600
D1025-STUTABGD-3600

Non-listed Carrier Compatibility
Dir Image Works with
0 Vodafone E-Plus Germany
1 Verizon
2 AT&T
3 Sprint
4 T-Mobile
6 Generic UMTS O2 UK?
O2 Germany
Mobitel Slovenia
7 Telefónica
8 Telecom Italia
9 Orange
12 DoCoMo
UMTS Default Firmware UMTS unlocked, O2 UK?
O2 Germany
E-Plus Germany

Loading the Firmware

The firmware for this device must be loaded prior to using the device. It persists in the memory of the device until the next cold boot. Then, it has to be loaded again. The firmware can be loaded automatically via udev using the gobi_loader application[2]. This application expects the firmware image files (amss.mbn, apps.mbn, and UQCN.mbn) in /lib/firmware/gobi/. Thus, create this directory as root, when it does not exist, and copy the appropriate firmware files into the directory. The previous section helps you to obtain the correct files.

Technically, the firmware loading interface is exposed over USB as id 05c6:9204 which can be accessed as a character (ttyUSB) device under Linux using the qcserial driver. After successfully loading the firmware, the device switches to the USB id 05c6:9205 and exposes three character devices (ttyUSB).

Modem

After the firmware is loaded, the modem is exposed over USB as id 05c6:9205 which can be accessed as a character (ttyUSB) device. Normal dial-up software can be used to create a 3G connection.

GPS

Since kernel 2.6.37, or with a small kernel patch (submitted upstream: [3]), two additional serial ports are available: Diagnostics Monitor and NMEA GPS. The three serial ports are:

       # /dev/ttyUSB0 -> Diagnostics
       # /dev/ttyUSB1 -> 3G Modem
       # /dev/ttyUSB2 -> NMEA GPS port

There is a PPA for the qcserial module for Ubuntu 10.10 which uses DKMS: ppa:dveeden/thinkpad-fixes.

If you have another serial USB device activated before the Gobi the ttyUSB-numbers will certainly change.

The Diagnostics Monitor uses Qualcomm's DM protocol; I used libqcdm (ModemManager) to talk to it, found it working, but at least DM commands 12 and 64 are not implemented on my device (Thinkpad x100e).

The GPS port and how to enable it has been confirmed now in the Gobi 3000 source code at: https://www.codeaurora.org/patches/quic/gobi/ Enable/disable GPS with:

       echo "\$GPS_START" > /dev/ttyUSB2
       # use GPS
       echo "\$GPS_STOP"  > /dev/ttyUSB2
NOTE!
Preconditions: this has only been tested with and without a 3G SIM card attached to the device and the firmware successfully loaded. It is not necessary though to be connected via 3G to be able to use GPS.

Also before you can use "$GPS_START/$GPS_STOP" feature, "Auto tracking" has to be enabled in the Options of the ThinkVantage GPS Windows application. The ThinkVantage GPS Windows application works with a clean Windows installation in a virtualizer that supports USB. However, it requires the Qualcomm Gobi 2000 Wireless WAN Driver to be installed.

You will need to enable it only once.

To verify if the device is in the right mode use gpscat

$ gpscat /dev/ttyUSB2
6,,,,26,,,,13,,,*70
$GPGSV,4,2,16,14,,,,25,,,,08,,,,09,,,*7B
$GPGSV,4,3,16,32,,,,24,,,,,11,,,*73

You could use gpsctl to verify if gpsd detected the device correctly:

$ gpsctl
gpsctl: /dev/ttyUSB2 identified as Generic NMEA at 9600

Detection can take a few minutes.

If gpsd didn't detect the serial port the use the following line:

sudo /lib/udev/gpsd.hotplug add /dev/ttyUSB2

Use xgps or cgps to verify if the GPS has a fix. If it does have a fix you could use TangoGPS or any other GPS tool which uses gpsd.

To use GPS for time synchronization add the following lines to /etc/ntp.conf:

server 127.127.28.0 minpoll 4 prefer
fudge  127.127.28.0 time1 0.183 refid NMEA

The 0.183 is for NMEA 0183

If it works it will look like this:

# ntpq -c peers
     remote           refid      st t when poll reach   delay   offset  jitter
==============================================================================
*SHM(0)          .NMEA.           0 l   15   16  317    0.000  -49.965   5.312

Carrier specific configurations

Each device is intended to be used with a specific carrier, and is shipped with firmware to support that carrier. Notebooks are often also shipped with a pre-installed SIM. Other carriers may work by loading a different firmware version. The 'generic UMTS' stage 3 firmware is known to with with O2, an unsupported UK carrier. See above for a list of known firmware files.

NOTE!
It may be illegal or a breach of contract in various countries to bypass a carrier lock


Troubleshooting

Some users have experienced the modem entering a strange state in which it refuses any attempt of loading the firmware. There seem to be at least two ways to reset the modem to get it working as normally again:

1) try to disable WWAN in BIOS and boot your computer. Then shut down it, and enable WWAN again. OR:

2) remove the AC adapter as well as the battery pack and then hold the power button for some time (approx 30 sec. - 1 min.). Then insert the battery again and boot as usual.

See discussion page (22 - 23 January 2011) for further details. --stman 10:10, 23 January 2011 (UTC)


Links

ThinkPads this device may be found in

AT&T service contract may be required

Verizon service contract may be required

Gobi 2000 WWAN upgradable

NOTE!
not every ThinkPad listed here can actually be upgraded