Difference between revisions of "Problem with red tinted display"

From ThinkWiki
Jump to: navigation, search
m (Affected Models)
(Affected Models)
 
(5 intermediate revisions by 3 users not shown)
Line 7: Line 7:
  
 
==Affected Models==
 
==Affected Models==
 +
*ThinkPad {{A22p}} (2629-Y2U, 15.0" TFT display with 1600x1200 resolution)
 
*ThinkPad {{A31p}} (2653-H4U and similar with high resolution displays)
 
*ThinkPad {{A31p}} (2653-H4U and similar with high resolution displays)
 
*ThinkPad {{T21}} {{T23}} (with high resolution (SXGA) displays)
 
*ThinkPad {{T21}} {{T23}} (with high resolution (SXGA) displays)
 +
*ThinkPad {{T40}} {{T41}} {{T42}} {{T43}}(14.1" TFT 1024x768)and (14.1" TFT 1400x1050)
 +
*ThinkPad {{R50p}} {{T42p}} {{T43p}} {{T60p}} (all with 15" UXGA IPS 1600x1200 LCDs)
  
 
==Affected Operating Systems==
 
==Affected Operating Systems==
Line 14: Line 17:
  
 
==Status==
 
==Status==
It is not clear which component (screen/backlight/inverter) exactly is responsible for this.
+
Reddish/pinkish hue - mostly visible on "cold" startup - is due to an aging backlight (CCFL). A replacement LCD or a backlight swap will be required.
  
 
==Solutions==
 
==Solutions==
Line 21: Line 24:
 
Change the fluorescent backlight, which has deceased. The phosporous layer of cold tube has a high spectrum in red, with the other spectra joining in after a few seconds, resulting in white color. this usually happens with aged tubes.
 
Change the fluorescent backlight, which has deceased. The phosporous layer of cold tube has a high spectrum in red, with the other spectra joining in after a few seconds, resulting in white color. this usually happens with aged tubes.
 
The tube is different sizes in different models. It can be ordered from some supply stores, but not from IBM or Lenovo.
 
The tube is different sizes in different models. It can be ordered from some supply stores, but not from IBM or Lenovo.
 
The problem can also be caused by a bad power inverter. The inverter converts the low-voltage DC electricity from the battery to high-voltage AC to drive the fluorescent tube. The inverter failure is often a cause of the red tint in the 600 series ThinkPads. The inverter can commonly be purchased cheaply and is much quicker to replace than the [http://www.bosstar.com/ CCFL] (cold cathode fluorescent lamp).
 

Latest revision as of 05:19, 25 January 2013

Information about the problem of red tinted display corners in T23 ThinkPads.

Problem description

If your screen is developing a red tint on the bottom left and/or right corners, this is the sign of a dying LCD and it will slowly spread to the whole screen.

The red tint is strongest when the screen is first switched on and it will fade away with the time your ThinkPad is running.

Affected Models

  • ThinkPad A22p (2629-Y2U, 15.0" TFT display with 1600x1200 resolution)
  • ThinkPad A31p (2653-H4U and similar with high resolution displays)
  • ThinkPad T21 T23 (with high resolution (SXGA) displays)
  • ThinkPad T40 T41 T42 T43(14.1" TFT 1024x768)and (14.1" TFT 1400x1050)
  • ThinkPad R50p T42p T43p T60p (all with 15" UXGA IPS 1600x1200 LCDs)

Affected Operating Systems

  • all

Status

Reddish/pinkish hue - mostly visible on "cold" startup - is due to an aging backlight (CCFL). A replacement LCD or a backlight swap will be required.

Solutions

You can have IBM fix the problem if your ThinkPad is still in warranty. Or: Change the fluorescent backlight, which has deceased. The phosporous layer of cold tube has a high spectrum in red, with the other spectra joining in after a few seconds, resulting in white color. this usually happens with aged tubes. The tube is different sizes in different models. It can be ordered from some supply stores, but not from IBM or Lenovo.