Installing Fedora on an X200
Contents
Functional Support Summary
| Feature or function | Fedora 9 x86_64 | Fedora 10 Preview/rawhide x86_64 | notes |
|---|---|---|---|
| Install via USB CD/DVD image | yes | yes | see network-install feature |
| Install via USB HDD | yes | yes | must create disk yourself |
| Install via USB flash | yes | yes | must create disk yourself |
| Intel 82567LM LAN | yes | yes | was disabled temporarily in several kernel versions |
| Intel 5100AGN WLAN | no | yes | only when using recent rawhide kernels in the 2.6.27 or later version sequence |
| Intel Cantiga Graphics with xorg "intel" driver | yes | sometimes | did not work for some versions |
| Intel Cantiga Graphics 3D accel | ? | partial | reports of stability problems (must use "intel" driver) |
| Intel Cantiga Graphics with xorg "vesa" driver | yes | yes | load i915 DRM module for power management |
| Trackpoint | yes | yes | |
| Lenovo Chicony webcam | yes | yes | uses uvcvideo USB driver |
| Bluetooth | yes | yes | uses btusb driver, enable or disable via thinkpad-acpi module |
| Intel HD audio | yes | yes | |
| ACPI hibernate with xorg "vesa" driver | yes | yes | load i915 DRM module for power management |
| ACPI hibernate with xorg "intel" driver | ? | sometimes | works starting with kernel-2.6.27.5-101.fc10 |
| ACPI suspend with xorg "vesa" driver | yes | yes | load i915 DRM module for power management |
| ACPI suspend with xorg "intel" driver | ? | sometimes | works starting with kernel-2.6.27.5-101.fc10 |
| ACPI hotkeys | ? | partial | multiple events being processed; use other GUI methods to avoid duplicate resume/suspend cycles |
| Fan control | partial | partial | automatic control seems to ramp up and never slow down; use thinkpad-acpi to change speeds with a scripted controller |
| ACPI CPU frequency | yes | yes | uses acpi_cpufreq driver |
| Thinklight | yes | yes |
Installation
The X200 lacks an internal optical drive, unless you get the expansion base. However, USB devices are bootable so you can use an external USB CD/DVD drive. You can also use a USB hard-drive containing ISO images if you want to boot a small install image and not burn a full DVD or CD-ROM set. A full network install will be possible only when the installation kernel supports the network device (not a given with these newest chipsets).
The standard Fedora 9 i386 and x86_64 kernels do not yet support the network devices, so a network-based installation is impossible. I installed using a local USB disk containing a DVD ISO image as the source media, and then also used a USB disk containing a current updates.newkey repo mirror to do the first round of yum updates (modifying the /etc/yum.repos.d/fedora-updates-newkey.repo file to point to a local file:/// URL.
The Fedora 10 Preview kernel does support the gigabit ethernet interface. Once installed, the wireless is also supported. With these latest installation kernels, a normal network install should be possible.
USB Boot
It seems as though I can only boot from an external USB CD/DVD drive when it is connected to one of the ports on the left-hand side of the machine, and not the port on the right-hand side. I do not know if this is expected or if it indicates a BIOS flaw.
SATA
The internal SATA hard disk is detected and supported during the Fedora 9 or 10 preview/rawhide x86_64 install.
Intel Gigabit Ethernet LAN
The drivers in the Fedora 9 installation media do not detect the LAN controller. The latest kernel-2.6.26.3-29.fc9 supports the LAN controller (verified with i686 kernel).
There was a brief period where the e1000e driver was disabled, but it is working again in Fedora 10 (rawhide) as well.
Intel 5100AGN WLAN
The drivers in the Fedora 9 installation media do not detect the WLAN controller, nor do the latest 2.6.26.3-29 kernels with the iwl-5000 firmware. The first Fedora kernel that seems to support this controller, using the iwlagn module, is the 2.6.27.0 kernel from rawhide.
Graphics
The integrated graphics is detected and supported during the Fedora 9 install and with the latest updates as of 2008-09-23.
I've been using rawhide kernels to get wireless support, but had to fall back to the vesa driver to get X to work that way. I finally see e1000e, iwlagn, and the intel driver for xorg all working at once as of 2008-10-16 with 2.6.27-13.fc10.x86_64! I started with a Fedora 9 x86_64 install that is up to date, and then did "yum --enablerepo=rawhide update kernel-* xorg-x11-* libdrm-*"...
With Fedora 10 Preview, the intel driver works but causes hangs during resume from suspend or hibernate. I used the vesa driver in order to have suspend states working. Starting with kernel update kernel-2.6.27.5-101.fc10.x86_64, suspend and resume now seem to work with the intel driver. However, there are some other stability issues with 3D that seem to linger... heavy use of 3D apps or compiz seems to lead to system lockups.
[jos] Using Fedora 11 x86_64, I had to add "nomodeset" to the kernel command line (edit /boot/grub/menu.lst) to be able to let all graphic modes / resolutions of the internal screen as well as beamers work. Without this option, you'll only be offered the native 1280x800 for LVDS and therefore never get proper cloned output on any non-wide-screen monitor/beamer.
Trackpoint
The integrated trackpoint pointing device (the "pointy-stick") is detected and supported during the Fedora 9 or 10 preview/rawhide x86_64 install.
Web Camera
The built-in webcam in the bezel is supported by the uvcvideo driver. It shows up as an attached USB device.
Bluetooth
The built-in bluetooth works with the btusb driver. It can be enabled and disabled via the thinkpad-acpi controls, which cause it to appear and disappear from the USB bus.
Sound
The integrated sound is detected and supported during the Fedora 9 or 10 preview/rawhide x86_64 install.
ACPI Power Management
The cpuspeed functionality and cooling seem to work properly.
The status of suspend and hibernate seems to be changing frequently with updates to the kernel and other packages. I have switched to Fedora 10 (rawhide) so I cannot report on the ongoing Fedora 9 status.
On Fedora 10 Preview installed and updated via yum, suspend and hibernate work with the vesa xorg driver and just recently, starting with kernel-2.6.27.5-101.fc10.x86_64, also work on resume with the intel xorg driver. Also, there seems to be a bug with the hotkeys, causing a "double suspend" or "double hibernate" effect: it sleeps or hibernates a second time immediately after resuming, and then stays awake the second time you wake it up. Lately, I have seen even more repeated resumes... three or four cycles before it stays awake. If you trigger the suspend or hibernate via another GUI method and not hotkeys, it works correctly the first time.
