Intel Active Management Technology (AMT)

Intel Active Management Technology (AMT) Some Lenovo laptop include some of Intel's Management features. Features Management over the Network (LAN and WLAN, using AMT 2.5) Remote Asset (Hardware and Software) Inventory Remote Diagnostic and repair (even if laptop is off or down) Agent Presence Checking (isolate corrupted laptops) Encrypted software update (w/ remote power-on). System isolation and recovery (Use hardware to filter inbound and outbound traffic, except management traffic) Dedicated Flash memory (Firmware + Inventory + ISV Data)

Hints how to setup it via Intel ME BIOS Extension (MEBx) based on the T61p (Small business Mode)

Enabling AMT in BIOS

• Use ThinkVantage System Update so you have the latest BIOS
• You should enable AMT in BIOS
• Hit the ThinkVantage button during the POST screen, then after the menu appears hit 'F1'
  • Select 'Config' on the main screen
    • Select 'Intel(R) AMT'
      • Set 'Intel(R) AMT Control' to 'Enabled'
      • Hit 'F10' to Save and Exit

Enabling AMT in Intel Management Engine BIOS Extension

• After the POST screen you will see the Intel ME BIOS Extension screen. Hit Ctrl+P to enter the setup.
  • The default password is 'admin' (without quotes)
  • If you try to change the Intel ME password and get "Error - Intel(R) ME password change rejected" message, then you are using a weak password. This are guidelines for the Intel ME strong password:
    • between 8- and 32-characters long
    • Contain both upper and lower case Latin characters
    • Have at least one numeric character
    • Have at least one ASCII non-alphanumeric character (!, @, #, $, %, ^, &, *)
  • Select Intel(R) ME Configuration
    • Select 'Intel(R) ME State Control'
      • Set it ENABLED
      • Select Return to Previous Menu
    • Select 'Intel(R) ME Firmware Local Update Qualifier'
      • Set it to ALWAYS OPEN
      • Select Return to Previous Menu
    • Select 'Intel(R) ME Features Control'
      • Select 'Manageability Feature Selection'
        • Choose 'Intel(R) AMT'
      • Return to previous menu
    • Select 'Intel(R) ME Power Control'
      • Select 'Intel (R) ME ON in Host Sleep States'
        • Set the 'widest' range of Sleep States
        • Hit 'ESC' to Exit. The system will reboot now.

Configuring AMT via Intel ME

• Hit Ctrl+P when the Intel ME BIOS messages apear
• Select 'Intel(R) AMT Configuration'
  • Select 'Host Name' and enter the same name as for the OS Host name
  • Select 'TCP/IP'
    • Hit 'N' to enable the Network Interface
    • Hit 'N' to enable DHCP
    • provide your domain name as set (or to be set) in the OS
  • Select 'Provision Model'
    • Hit 'N' to not change to AMT 1.0 Mode
    • Hit 'Y; to change to Small Business
  • Select 'SOL/IDE-R'
    • Hit 'Y' to confirm the warning
    • Set Username & Password to ENABLED (if it's set to ENABLED don't hit just 'ENTER' because you disable it)
    • Set Serial Over LAN to ENABLED
    • Set IDE Redirection to ENABLED
  • Select 'Secure Firmware Update'
    • Set it to ENABLED
  • Hit 'ESC' to Exit. The system will reboot again.

Configuring the OS

• Use ThinkVantage System Update to get the AMT Software
• After update reboot
• After Log-in you should see the message 'Intel(R) Active Management Technology (Intel(R) AMT) status on this computer is enabled.'

Links

• See Also Centrino Pro
• Intel - AMT [1]
• Intel® Active Management Technology (Intel AMT) Software Development Kit (SDK) Start Here Guide [2]
• Tips & Tricks for Setting up & Accessing an Intel AMT Client [3]

ThinkPads that may include this feature

Version	Models
AMT 2.5	T61, T61p, X61 Tablet