Talk:Sample Fn-F7 script

Note: you will need to change the internal and external resolution until someone fixes this script to figure it out from xrandr, you may also need to change output names from "VGA" and "LVDS" to what your xrandr tells you.

why not just use --auto ?

xrandr --output VGA --auto

xrandr --output VGA --off

xrandr --output LVDS --auto

xrandr --output LVDS --off

---

Good point, made the changes --seva

1. This is to figure out which user and X11 display to work on
2. TODO there has to be a better way to do this?

SU="su $(w -h -s | grep ":[0-9]" | head -1 | awk '{print $1}') -c" export DISPLAY=$(w -h -s | grep ":[0-9]" | head -1 | awk '{print $3}'

As the xrandr command can be run by the user is this necessary? if the script called by Fn7 can be run by an ordinary user then is it not equivalent to running the commands in an xterm?

djc@Twingo:~$ xrandr --output LVDS --auto --output VGA --off

djc@Twingo:~$ xrandr --output LVDS --off --output VGA --auto

djc@Twingo:~$ xrandr --output LVDS --auto --output VGA --auto

concerning detecting what is currently active from xrandr. with VGA off xrandrq shows

Screen 0: minimum 320 x 200, current 1024 x 768, maximum 2048 x 2048 VGA connected (normal left inverted right)

  1600x1200      60.0 +   59.9  
  1280x1024      75.0     59.9  
  1152x864       74.8  
  1024x768       75.1     60.0  
  800x600        75.0     60.3  
  640x480        75.0     60.0  
  720x400        70.1  

LVDS connected 1024x768+0+0 (normal left inverted right) 304mm x 228mm

  1024x768       60.0*+   50.0  
  800x600        60.3  
  640x480        60.0     59.9 

with VGA on

VGA connected 1600x1200+0+0 (normal left inverted right) 367mm x 275mm
  1600x1200      60.0*+   59.9  
  1280x1024      75.0     59.9  
  1152x864       74.8  
  1024x768       75.1     60.0  
  800x600        75.0     60.3  
  640x480        75.0     60.0  
  720x400        70.1  

LVDS connected 1024x768+0+0 (normal left inverted right) 304mm x 228mm

  1024x768       60.0*+   50.0  
  800x600        60.3  
  640x480        60.0     59.9  

with LVDS off:

djc@Twingo:~$ xrandr --output LVDS --off --output VGA --auto djc@Twingo:~$ xrandr -q Screen 0: minimum 320 x 200, current 1600 x 1200, maximum 2048 x 2048 VGA connected 1600x1200+0+0 (normal left inverted right) 367mm x 275mm

  1600x1200      60.0*+   59.9  
  1280x1024      75.0     59.9  
  1152x864       74.8  
  1024x768       75.1     60.0  
  800x600        75.0     60.3  
  640x480        75.0     60.0  
  720x400        70.1  

LVDS connected (normal left inverted right)

  1024x768       60.0 +   50.0  
  800x600        60.3  
  640x480        60.0     59.9  

so detection should be possible on the differences between VGA connected 1600x1200+0+0 (normal left inverted right) 367mm x 275mm

and

VGA connected (normal left inverted right)

and

LVDS connected (normal left inverted right)

and

LVDS connected 1024x768+0+0 (normal left inverted right) 304mm x 228mm

eg between "xxxx connected nnnnxnn+0+0 (" and "xxxx connected ("