Installing Ubuntu 7.10 (Gutsy Gibbon) on a ThinkPad T61

Installation Notes

If booting with the default options gives you a blank screen you should select the "Safe Graphics" menu choice when booting from the live CD.

If you are doing a text mode install such as PXE/network then your screen will be corrupted during the process. Workaround and details are at https://bugs.launchpad.net/ubuntu/+source/xresprobe/+bug/127008

Video

Intel video works out of the box, but Nvidia accelerated 3D support is not installed by default. To install Nvidia 3D support click System->Administration->Restricted Drivers Manager

With Nvidia, you may experience a bug where the X server crashes or fails to start. Numerous solutions are provided (with mixed results) in the Launchpad bug report as well as this thread on the Ubuntu forums.

Adding a second monitor may break your xorg.conf if you use the graphical interface. I haven't tried editing the xorg file manually to see if one can be added.

Audio

Audio does not work out of the box, but will work once you apply all the updates.

Microphone may not work with applications (like sound recorder and skype) even though sound can be heard through the speakers or headphones.

Enabling Sound and Fixing the Volume Controls

By default, the sound may be disabled and the volume control buttons on the laptop (up by the ThinkVantage button) and the volume control applet (up by the clock) will not control the speaker volume (they actually control the microphone!). https://bugs.launchpad.net/ubuntu/+bug/136287

To fix this:

1. Right-click on the volume control applet (by the clock) and select "Open Volume Control"
2. In the "Switches" tab, make sure "Headphone" and "Speaker" are both checked.
3. Close the Volume control.
4. Right-click on the volume control applet again and select "Preferences".
5. Make sure the device is set to "HDA Intel (Alsa mixer)" and highlight the "PCM" option.
6. Close the preferences.
7. Select System->Preferences->Sound.
8. In the "Default Mixer Tracks" section, make sure "PCM" is highlighted.
9. Close the sound preferences.

You should now hear sound and be able to control the volume using the laptop buttons or volume applet.

Modem

The modem works with the Linuxant drivers available at http://www.linuxant.com

Fingerprint Reader

The reader works with ThinkFinger. General instructions available here.

Debian packages for i386 can be found at: http://www.rubixlinux.org/debian/thinkfinger/

After the package is installed add the following two lines to /etc/pam.d/common-auth

auth    sufficient      pam_thinkfinger.so
auth    required        pam_unix.so try_first_pass

Note: Instructions in French available at http://doc.ubuntu-fr.org/materiel/thinkfinger

• Recording fingerprints works
• Login works
• gksudo crashes : for example it is necessary to run synaptic twice and enter your password upon failure.

Trackpad scrolling

Trackpad scrolling works out of the box in the standard thinkpad way: Slide your finger up and down the very right edge of the trackpad.

To enable using the middle mouse button to scroll, add the following lines to the "Configured Mouse" section in /etc/X11/xorg.conf:

   Option    "EmulateWheel"          "true"
   Option    "EmulateWheelButton"    "2"

Hibernate/Suspend

Blank Screen Fix

You may get a blank screen when resuming from suspend or hibernate (Launchpad bug report). If so, try editing /boot/grub/menu.lst, adding "acpi_sleep=s3_bios" (no quotes) to the "defoptions" list so that it looks something like this:

 ## additional options to use with the default boot option, but not with the
 ## alternatives
 ## e.g. defoptions=vga=791 resume=/dev/hda5
 # defoptions=quiet splash acpi_sleep=s3_bios

Once you have edited the line and added the acpi_sleep parameter, you need to run

 $ sudo update-grub

Note that if you get the blank screen upon resume, a quick-fix is to switch to a console (Ctrl-Alt-F1) and then back to X (Ctrl-Alt-F7). This will usually bring the display back to life. However, the long-term fix is to add the acpi_sleep parameter as shown above.

Intel 3495ABG Wireless

Sometimes after a resume, the wireless card won't come back up. When the [quirk checker script] is run, it says:

 CRITICAL ERROR: Use the mac80211 iwl3945 driver instead. ipw3945d is closed source sometimes hangs on resume.

The iwl3945 driver generally only works for about 30 minutes to an hour, though, so it's not a suitable replacement.

Fonts on High-Res Screens

On high-res screens (e.g. 15" 1680x1050), the default fonts are too big. You can fix this by following these steps:

1. Open System->Preferences->Appearance
2. Select the "Fonts" tab
3. Click the "Details" button (lower right)
4. Adjust the Resolution down to 96dpi
5. Make sure you have Subpixel (LCD) Smoothing enabled
6. Save the preferences

Brightness

The brightness controls (Fn-Home, Fn-End) don't seem to work reliably (if at all), and the brightness dialog box occasionally will pop up at random or "stick" on the screen, often causing the screen to flicker. Messing around with the brightness controls (Fn-Home, Fn-End) will usually make the dialog to go away and the flickering stop. Launchpad bug report.

With the Nvidia card to increase/decrease brightness hit Ctrl+Alt+F1 to drop to a virtual console, change the brightness and hit Ctrl-Alt-F7 to return to Gnome. This can be done without affecting running applications.

If you have an Intel card you can install the Gnome Brightness Applet to give you an easy way to change the brightness from within Gnome:

1. Right-click on the top menu bar.
2. Select "Add to Panel".
3. Scroll down to the "System & Hardware" section.
4. Highlight the "Brightness Applet" and click the "Add" button.

Using this applet often results in the "flickering screen syndrome" described above, but jiggling the brightness slider a little will cause this flickering to stop.

As an alternative, install the program xbacklight which requires using the command line, but doesn't suffer from issues with flickering screens. For example to set 50% brightness:

 xbacklight =50

Items that work out of the box

Intel Video: 2D and 3D acceleration works

Nvidia: 2D works, 3D requires the installation of the proprietary drivers

Wireless: Atheros and Intel work

Network Card

Firewire

Wireless switch

4-in-1 card reader

Headphones/Microphone jacks

Bluetooth: The bluetooth module is detected but I have no bluetooth device to check with.

Keyboard Shortcuts:

• Fn-PgUp activates/deactivates the thinklight
• Fn-Up will trigger stop on a media player
• Fn-Down will toggle pause and play on a media player
• Fn-Left/Right go to prev/next tracks on a media player
• Fn-F2 properly locks the screen
• Fn-F3 shows remaining battery
• Fn-F4 suspends (to ram)
• Fn-F12 hibernates (to disk)
• PrtSc opens the screenshot dialog

Docking Stations:

All docking station models should work and the following features have been tested:

• DVI or Analog video: You can switch to it using xrandr for Intel cards or using the Nvidia Control Panel with the Nvidia card.

Help needed

Does the new displayconfig-gtk tool work for switching video with the Intel card?

• Network Pass-through: Works

• Modem Pass-through: Works

• USB ports: Connected upon docking

• PS/2 Ports: Untested, may require a reboot.

NOTE!

Please see the Talk page for discussions on this category, if it is needed and alternatives

Items that don't work

* Wireless USB/UWB - https://bugs.launchpad.net/ubuntu/+bug/136287
* USB ports can end up temporarily disabled - https://bugs.launchpad.net/ubuntu/+source/linux-source-2.6.22/+bug/126369