Installing Ubuntu 7.04 (Feisty Fawn) on a ThinkPad T60

From ThinkWiki
Revision as of 18:51, 6 March 2007 by Loire280 (Talk | contribs) (→‎ATI Driver, Wireless, and Powernowd Suspend Fixes)
Jump to: navigation, search

Ubuntu Feisty Fawn is still under development (alpha status) and works fine on a T60 UT-049GE and 2007-72U.

The installation worked without any problems. The new network manager is great as it now supports a useful roaming mode. The system runs stable since 3 days of work. No crash, no severe bugs. I would recommend it for experimental systems lovers. :)


ATI Driver, Wireless, and Powernowd Suspend to RAM Fixes

(Feel free to clean this up with proper wiki markup)

"Out of the box:"

  • Suspend to RAM fails during suspend, leaving the moon blinking indefinitely.
  • The Ubuntu apt-installed fglrx packages give the driver version 8.33.6, which is one of the versions that supposedly "breaks" suspend to RAM. Resuming from an otherwise successful suspend will cause the machine to resume with a blank screen without the fix below.
  • The Intel Pro Wireless 3945 wireless card will often stop working even after a successful suspend, requiring a restart.

These two steps will fix suspend to RAM so that it works reliably after you've installed the ATI fglrx driver. I'm assuming you have the Intel Pro Wireless option; ignore the part with the iwp3945 if you don't have that wireless card.

Fixing Suspend to RAM

1. Disable powernowd during suspend

Open a terminal and type: sudo gedit /etc/acpi/suspend.d/10-thinkpad-standby-led.sh

Add to the bottom of the file: /etc/init.d/powernowd stop

Save the file and go back to the terminal.

Type: sudo gedit /etc/acpi/resume.d/90-thinkpad-unstandby-led.sh

Add to the bottom of the file: /etc/init.d/powernowd start

These two edits will disable the powernowd when you suspend, and re-enable it when you resume. For whatever reason, powernowd causes intermittent suspend problems.

2. Edit /etc/acpi-support file to unload wireless module during suspend and disable video card warm boot

Open a terminal and type: sudo gedit /etc/default/acpi-support

Find the line MODULES="" and change it to MODULES="ipw3945" so that your wireless card module won't disappear after you resume.

Next, find the line POST_VIDEO=true and change it to POST_VIDEO=false to eliminate the blank-screen-resume problem.

Save the file.

Retrieved from "https://www.thinkwiki.org/w/index.php?title=Installing_Ubuntu_7.04_(Feisty_Fawn)_on_a_ThinkPad_T60&oldid=28593"