Talk:Problem with video output switching

Radeon driver working great in my X31

The radeon driver video output switching is working in my X31 with some small glitches. Perhaps I should update a bit this page, because the problems listed for radeon are very old, but I don't want to do this without the experience of people with other Radeon video cards.

For me Fn-F7 is working in console and X (Debian Etch). It stops to work when I run X with mergedFB settings to be able to have 2 displays (which is the way it works in windows by the way). But is working perfectly for the intended use (to have one screen and be able to plug an external cloned screen or projector with the same resolution).

--Ungoliant 18:23, 25 February 2007 (CET)

X40 solution

I have found a solution for switching back to LCD with the Intel Cards on my X40. But it semms a bit strange to me so maybe someone can confirm that it also works on other Thinkpads (mine is a X41) and setups before I edit that wiki entry.

If i do echo lcd_enable,crt_disable > /proc/acpi/ibm/video after enabling crt i get to see the screen on both lcd and crt although scrambled on crt. After executing it the second time i get lcd only. So for now i always execute that command twice.

Describe the problem (cloning)

Hello

I suggest to describe the problem a little more in detail. Moreover, cloning, that is to have the display on both screens the external and the LCD, is possible. Oub 13:57, 11 July 2006 (CEST):

Thats interresting. The person that wrote that "lcd_enable" should write which model he has, because I have no problems with my T43. I mainly use "video_switch".

Defiant 17:06, 11 July 2006 (CEST)

X60(s)?

Does the problem of switching video output also exist for the X60(s) series?