Installing OpenSUSE 10.1 on a ThinkPad T43

Most things run just fine after installation, the Rest I got working with the great articles here.

TODO	Finish article - it's not done yet!

Installation

ATTENTION!

The Pre-Desktop-Area has to be protected before installation, otherwise the Recovery-System will be lost. To do so, set Predesktop-Area to "Secure" in BIOS. Additionally, it's always useful to have the Recovery-CDs burned before an installation attempt

The automatic shrinking of the NTFS-partition did not work during the Installation of SUSE, so I shrinked it with QtParted from a Knoppix-DVD. To be able to boot Windows and Linux (via Grub) and the Recovery-System (with Access IBM), install the bootloader in the new, extended partition (usually /dev/sda).

Besides that, everything went fine, most Hardware was set up correctly: Graphics Card, Touchpad and Trackpoint, WLAN, Bluetooth, Modem (yet untested), Volume Control.

ACPI

Everything set up correctly, ibm-acpi ist installed, Suspend-to-RAM and Suspend-to-Disk work with the keys already assigned to them. I still miss RediSafe though, maybe I'll use Software Suspend 2 some day.

Fingerprint Reader

How to enable the fingerprint reader neatly explains everything. I had to do the last steps manually, because the Script for enabling the fingerprint reader did not run till the end on Suse 10.1

3D Acceleration

The Standard driver did work for 2D, but with no 3D acceleration. When I added

Section "Module"
       	[...]
        Load  "glx"
	[...]
EndSection

to my /etc/X11/xorg.conf, the 3D acceleration worked with the OpenSource driver, but now there were problems with Suspend. So I decided for the proprietary fglrx-Driver directly from Ati. Installed fine, after I created a distribution-specific rpm with the Installer.

Extensions

Trackpoint Scrolling

External Sources

My Installation article, in German