ATI Mobility Radeon 7000
|
This is an ATI video adapter Features
|
Also known (in IBM literature) as....
- ATI Mobility RADEON
- ATI Rage Mobility RADEON M6
- ATI Rage Mobility RADEON M6MC
- ATI Mobility RADEON M6C (eg. M6C-16h)
- ATI Mobility RADEON M6 LY
Linux driver - OpenSource
This adapter is supported by recent versions of the radeon driver as found in X.Org and XFree86.
ThinkPad LCD
Display on the internal LCD works as long as you set the monitor settings correct.
For Xinerama to work properly on Fedora Core 4 you need to first configure it with the display tools, then manually add
- Option "MergedFB" "True"
- Option "MonitorLayout" "LVDS, CRT"
to the Videocard0 section.
External VGA port
Works fine with xorg radeon driver.
SVideo port
SVideo out is supported by the ati.2 driver from the GATOS project.
Read here how to set it up.
Linux driver - Proprietary
This chip is not supported by the proprietary ATI driver
Linux kernel Framebuffer driver
- Tested and working fine under Gentoo.
- Tested and working under Debian Etch.
- Tested and working under Debian (with re-compiled kernel 2.6.16-9).
ThinkPads this chip may be found in
Problems (and Solutions)
Problem with video output switching
On some models there are problems with video output switching and the xorg radeon driver.
Xorg & OpenGL
See http://forums.gentoo.org/viewtopic-t-451151-highlight-.html for information on how to enable stable OpenGL support. Some of the tricks are:
- disable the console frame buffer.
- disable the hardware cursor in Xorg.
- plus some more.
Additional site: https://stier.is-a-geek.com/~moinmoin/MarksWiki/LinuxRadeonM6LY/Conf1 <-- Closed!
NOTE: Default Dpi 16 bit for card Ati Mobility Radeon M6 LY
NOTE: I (User:msoos) actually got DRI direct rendering with framebuffer and hardware cursor, without any fancy setting at all (apart from re-compiling the 2.6.16-9 with some more-or-less standard setting) on Debian testing.
I (User:ungoliant) confirm what msoos said. DRI is working wonderfully with framebuffer and hardware cursor. AIGLX is working too, albeit a bit slow ( Compiz or Beryl are not as snappy as the 2D desktop is ). Debian Etch, and kernel 2.6.20.
The settings made with DRIconf can have a huge impact in 3D performance. Please take a look at DRI options for ATI Radeon.
