Intel Graphics Media Accelerator 950

From ThinkWiki
Revision as of 09:00, 6 October 2007 by Savar (Talk | contribs)
Jump to: navigation, search

Intel Graphics Media Accelerator 950

This is an Intel video adapter

Features

  • Integrated into the following chipsets:
  • PCI ID: 8086:27a2
  • Uses up to 224MB of main memory for video usage

Linux X.Org driver

Supported by Xorg http://www.xfree86.org/current/i810.4.html. The driver supports hardware accelerated 3D via the Direct Rendering Infrastructure (DRI), but only in depths 16 and 24.

Linux Intel driver

There is a Graphics driver for the Mobile Intel® 945GM Express Chipset Family at Intels Support Site. This driver is just a snapshot of the Xorg/XFree86 driver.

In my case, the i810 driver recommended by multiple sources for this graphics card did not work, leaving a message of "No device found." Running against the generic vesa drivers solves that problem, but does not allow use of the external VGA port.

In Fedora Core 5 at least, the correct i810 driver can be obtained from the updates (in updates-testing as of Aug 15, 2006). With that, the i810 driver seems to work.

To get a noticeable speedup in GLX/DRI try this in your xorg.conf (tested with the game Sauerbraten on a Z61e): 

   Section "Device"
       Identifier      "Intel Corporation Mobile Integrated Graphics Controller"
       Driver          "i810"
       BusID           "PCI:0:2:0"
       VideoRAM 131072
       Option "XAANoOffscreenPixmaps" "true"
       Option "MTRR" "on"
       Option "UseFBDev" "false"
       Option "LinearAlloc" "6144"
       Option "MonitorLayout" "CRT,LFP"
       Option "DevicePresence" "true" 
   EndSection

ThinkPad LCD

Display on the internal LCD works as long as you set the monitor settings correct.

External VGA port

Works. Dualhead is supported.

There are two options for running the external VGA port - either as a copy of the LCD (clone) or as a separate workspace. Here is an example for the separate workspace mode for xorg.conf for the X60s: 

   Section "Device"
       Identifier      "Intel Corporation Mobile Integrated Graphics Controller"
       Driver          "i810"
       BusID           "PCI:0:2:0"
       Option "MonitorLayout" "CRT,LFP"
       Option "DevicePresence" "true" 
       Screen 1
   EndSection
   Section "Device"
       Identifier      "Intel Corporation Mobile Integrated Graphics Controller External CRT"
       Driver          "i810"
       BusID           "PCI:0:2:0"
       Screen 0
   EndSection
   Section "Monitor"
       Identifier      "LCD"
       Option          "DPMS"
   EndSection

   Section "Monitor"
       Identifier      "External CRT"
       Option          "DPMS"
       HorizSync 28-75
       VertRefresh 43-100
   EndSection

   Section "Screen"
       Identifier      "External Screen"
       Device          "Intel Corporation Mobile Integrated Graphics Controller External CRT"
       Monitor         "External CRT"
       DefaultDepth    24
       SubSection "Display"
               Depth           24
               Modes           "1280x1024"
       EndSubSection
   EndSection

   Section "Screen"
       Identifier      "Default Screen"
       Device          "Intel Corporation Mobile Integrated Graphics Controller"
       Monitor         "LCD"
       DefaultDepth    24
       SubSection "Display"
               Depth           1
               Modes           "1024x768"
       EndSubSection
   EndSection

   Section "ServerLayout"
       Identifier      "Default Layout"
       Screen          0 "Default Screen" 0 0
       Screen          1 "External Screen" RightOf "Default Screen"
       InputDevice     "Generic Keyboard"
       InputDevice     "Configured Mouse"
       InputDevice     "Synaptics Touchpad"
   EndSection

Did not work for me (FC6, x60s) but this one did: (as the x-server crashes at startup if the external port is the primary display you need to change the bios option BIOS>Config>Display>Boot Display Device to "ThinkPad LCD") 

Section "ServerLayout"
 Identifier     "Default Layout"
 Option         "Xinerama"
 Screen      0  "Screen0" 0 0
 Screen      1  "Screen1" LeftOf "Screen0"
 InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "InputDevice"
 Identifier  "Keyboard0"
 Driver      "kbd"
 Option	    "XkbModel" "pc105"
 Option	    "XkbLayout" "de"
 Option	    "XkbVariant" "nodeadkeys"
EndSection

Section "Monitor"
 Identifier   "Monitor2"
 ModelName    "Belinea 1905 G1"
 HorizSync    30.0 - 83.0
 VertRefresh  50.0 - 76.0
 Option	    "dpms"
EndSection

Section "Device"
 Identifier  "Videocard0"
 Driver      "i810"
 BusID       "PCI:0:2:0"
 Option      "MonitorLayout" "CRT,LFP"
 Option      "DevicePresence" "true"
 Screen      0
EndSection

Section "Screen"
 Identifier "Screen0"
 Device     "Videocard0"
 DefaultDepth     24
 SubSection "Display"
  Viewport   0 0
  Depth     24
  Modes    "1024x768" "800x600" "640x480"
 EndSubSection
EndSection

Section "Device"
 Identifier  "Videocard1"
 Driver      "i810"
 BusID       "PCI:0:2:0"
 Option      "MonitorLayout" "CRT,LFP"
 Option      "DevicePresence" "true"
 Screen      1
EndSection

Section "Screen"
 Identifier "Screen1"
 Device     "Videocard1"
 DefaultDepth     24
 SubSection "Display"
  Viewport   0 0
  Depth     24
  Modes    "1280x1024" "1024x768" "800x600" "640x480"
 EndSubSection
EndSection

Here is the relevant text for running the VGA port as a true clone (so even things like Xine video playback appears on both screens) of the internal LCD display: 

   Section "Device"
        Identifier "Videocard0"
        Driver "i810"
        BusID "PCI:0:2:0"
        Option "MonitorLayout" "NONE,LFP+CRT"
        Option "DevicePresence" "true"
        Option "CheckLid" "false"
        VendorName "Lenovo"
        BoardName "Intel Corporation Mobile Integrated Graphics Controller"
   EndSection

comment

I had to disable dri and glx because of X11 crashes with programs using 3D. see http://ubuntuforums.org/showthread.php?t=289763

Unsupported video modes

Largest video resolution, supported by VESA for T60 is 1280x1024. You can set that for console in grub or lilo by adding vga=794 option.

Default video modes does not support resolution 1400x1050. You can use 915resolution to change that. 

# To show supported video modes:
915resolution -l

# To add 1400x1050 support:
915resolution 5a 1400 1050

# You may need to specify 24-bit color:
915resolution 38 1400 1050 24

Xorg will be able to use this resolution after that.

SVideo port

??

DVI port

DVI passthrough is only supported on the T60.

Linux support status is unknown

Suspend behaviour

  • Required kernel parameters for suspend to ram: none
  • Additional notes:
    • switch to/from X11 to reinitialize display properly (stays black)
    • DO NOT use vbetool to save/restore the video mode, this breakes resume!

new X.Org INTEL driver (not i810)

To use the external VGA port you have to remove all extra ServerLayout and Screen sections in xorg.conf. In your default Screen section you put into the subsection "Display" a line like this: 


   Section "Screen"
       Identifier      "Default Screen"
       Device          "Intel Corporation Mobile Integrated Graphics Controller"
       Monitor         "Default Monitor"
       DefaultDepth    24
       SubSection "Display"
               Depth           24
               Modes           "1024x768"
               Virtual         4096 2048
       EndSubSection
   EndSection


After starting into X you can use the new features of XRandR 1.2 so as an example: 

   xrandr --output VGA --right-of LVDS --mode 1920x1200

ThinkPads this chip may be found in

Retrieved from "https://www.thinkwiki.org/w/index.php?title=Intel_Graphics_Media_Accelerator_950&oldid=33688"