Problem with audio clipping

From ThinkWiki
Revision as of 12:13, 15 June 2007 by Dennisg (Talk | contribs) (→‎Model-specific observations)
Jump to: navigation, search

One some models, certain audio mixer settings may result in very "harsh" and distorted sound both on the internal speakers and on headphones plug. This is especially evident when the played audio has high volume (i.e., full dynamic range).

This is caused by a hardware flaw: excessive internal amplification saturates the audio channels, resulting in clipping.

Solution: reduce the volume on the responsible mixer channel(s). e.g. in the console alsamixer with control via arrows: up/down left/right.

Model-specific observations

  • ThinkPad T43 (AD1981B audio controller): PCM channel volume higher than 70% may result in clipping, regardless of the Master channel.
  • ThinkPad R40 (Intel 82801DB/DBL/DBM audio controller (AC97)): PCM volume needs to be set under 80%, higher values cause clipping. Same with the Master channel as on T43.
  • Thinkpad Z61e (Intel High Definition with AD1981): Just turn down the PCM channel volume to at least 77% and you should be happy (in some combination with external speakers, 65% was needed), the Master Channel can be kept at 100%. If that doesn't help, loading snd-hda-intel with model=thinkpad and position_fix=1 might also improve a bit.
Retrieved from "https://www.thinkwiki.org/w/index.php?title=Problem_with_audio_clipping&oldid=30502"