ThinkPad Port Replicator

From ThinkWiki
Revision as of 10:50, 9 October 2005 by Rolf (Talk | contribs) (DVI pass-through)
Jump to: navigation, search

IBM ThinkPad Port Replicator

The Port Replicator contains basic pass-through connections for notebook ports, including power pass-through. It comes without integrated power supply but provides the same AC port as found in a ThinkPad, so you need to use either your Thinkpad AC adapter or another IBM AC adapter. Besides all the pass-through ports the Port Replicator comes with an On/Off switch and a slot for a cable lock (only for the dock though).

Features

  • Passthrough ports:
    • Ethernet (RJ45)
    • Modem (RJ11)
    • USB (1-port)
    • DVI (only works with TP A2*p models)
    • VGA
    • Serial (DB9-M)
    • Parallel (DB25-F)
    • PS2-keyboard
    • PS2-mouse
    • Diskette drive
    • Audio line-in and line-out
  • Kensington Lock connector
  • Power button

Pros & Cons

  • Positives: Inexpensive
  • Negatives: Requires AC adapter, only one USB port, doesn't secure Thinkpad
  • Compatibility: X20/30, T20/30, R30, and A20/30 series
  • Warranty: One Year

IBM Partnumbers

  • Order Partnumber: 02K8668
  • FRU partnumber: 08N1536

DVI pass-through

LCD monitors are getting larger and higher-resolution. Currently, DVI based on 165MHz TDMS transmitters can only (officially) support 1600x1200x32 at 60Hz, which is the resolution of your average 20" non-widescreen LCD. IBM's driver support for this resolution through DVI ports on docks has been inconsistent. Also in Linux you might experience problems even with this resolution and IBM officially states that the pass-through DVI port only supports resolutions up to 1280x1024. Read our page of information on how to solve these troubles.

Please be aware that not all Thinkpad models will support DVI output with a Dock. Apparently, all X and T models from the 20 series do not. Please add other models if you know about them to not support DVI.

Supported ThinkPads