Patch disabling ACPI C3

From ThinkWiki
Revision as of 21:36, 26 September 2004 by Wyrfel (Talk | contribs) (added Category)
Jump to: navigation, search

On some Thinkpads there is a problem with the ipw2100 wireless LAN driver when C3 is enabled. It results in frequent firmware restarts due to data corruption. If you see this problem frequently and want to disable C3 but still use C2 and the thermal management, you can apply this patch to the file /usr/src/linux/drivers/acpi/processor.c.
APPLY THIS PATCH ONLY IF YOUR SYSLOG REPORTS DRIVER RESTARTS AND FIRMWARE RELOADS ALL THE TIME!
This patch causes slightly shorter battery life.

If you don't want to patch your kernel, sacrifice C3 entirely and/or use WLAN mainly on AC then you can alternatively add rules to modules.conf to unload the acpi processor module as long as ipw2100 is loaded.

Retrieved from "https://www.thinkwiki.org/w/index.php?title=Patch_disabling_ACPI_C3&oldid=420"