Installing Ubuntu on a ThinkPad T20
Ubuntu 6.10, Edgy Eft
Blank Screen when booting Live CD
As described in Installing Ubuntu on a Thinkpad T21, there is an issue with the Savage driver which makes the initial boot into X hit and miss.
You can avoid this problem by using the alternate install CD. However, that doesn't allow you to do any pre-installation evaluation of the GUI that the Live/Install CD provides.
Using APM to Suspend
To enable APM when booting the Live/Install CD, add these boot options:
`noacpi acpi=off apm=on`
After booting, `Fn-F4` will still only put the command in a standby state, but using `apm --suspend` on the command line will successfully suspend machine, and it resumes as well.
Another user reports that APM leads to a unsuccessful shutdown, hanging on the last splash screen.
Suspending with ACPI
A alternative to APM is ACPI. It is newer and more advanced, and preferred when it works. However, even with the newest BIOS (1.22) installed in the T20, Linux will still recognize the BIOS as "too old" and will disable ACPI. You can override this by adding this boot option: `acpi=force`.
Assuming you actually have Ubuntu installed (i.e., not running from Live CD) To add this boot option, open /boot/grub/menu.lst and look for the line(s) (there will be one for each boot menu choice) similar to:
kernel /boot/vmlinuz-2.6.17-10-386 root=UUID=1a2b3c4d-5e6f-1234-7a8b-1a2b3c4d5e6f ro
(n.b., I've obscured the UUID hex string above).
and add acpi=force to the lines you wish to change (i.e., the choices you want ACPI enabled for, though you probably only want to add to the line corresponding to the option for normal boot, not the recovery boot options).
NOTE: Before running the grub-install line at your own risk below, make sure you know what you're doing (i.e., have read the grub documentation) and that /dev/hda is your boot drive otherwise you may render your system unbootable. Obviously if you're not using grub then this won't work. Now run:
grub-install /dev/hda
In `/etc/default/acpi-support` adjust the following values:
MODULES="snd_cs46xx" RESTART_IRDA=true
Now, suspend-to-ram and suspend-to-disk and resume should all work OK, with the following caveats:
1. Weird errors seem to get output on resume. (TODO: list example here) 2. Sometimes the machine will randomly enter suspend mode. This has also been seen happening on Mandriva on the same model. It's generally rare enough to be little more than mildy annoying.
ACPI Suspend does not work on the LiveCD. `gnome-power-manager` logs to `/var/log/messages` that is beginning to suspend, but nothing happens. This looks like it might be a known bug in Ubuntu.
Special Key Support
The light and brightness keys work as expected. The volume keys have some on-screen visuals that automatically appear to illustrate them, using graphics that match the curren theme. Rather nice!
Video
Direct rendering / GL acceleration works. Use "PCI" in BIOS rather than AGP. I removed all modes apart from 1024x768. ppracer plays well at c. 10fps with all the eye candy on.
Driver "savage"
BusID "PCI:1:0:0"
Option "SWCursor" "on"
Option "ShadowStatus" "on"
Option "DMAMode" "Vertex"
Option "DmaType" "PCI"
Option "BusType" "PCI"
HorizSync 28-51
VertRefresh 43-60
Have to set DefaultColorDepth to 16 in section Screen, otherwise, the memory card won't have enough memory to do acceleration.
Confirmed compatible wireless cards
Belkin f5d7050 Wireless 802.11g USB adaptor (version 3) works (plugged into dock's lower USB port). The procedure is essentially install the ndiswrapper-1.8 and work through https://help.ubuntu.com/community/WifiDocs/WirelessTroubleShootingGuide.=
DVDs
DVDs play great once you've installed all the missing multimedia plugins. (work through https://help.ubuntu.com/community/MultimediaApplications and the linked to freeformats and restrictedformats pages).
Working software (or not)
One thing I find frustrating is that often it's difficult to know in advance which software requires too much memory / cpu or has GL problems (e.g., the infamous visual 0x42 error). At the risk of this lengthening this page somewhat here's a small list to start with.
With 128Mb
OpenOffice OK Eclipse needs more RAM
With 384Mb
Eclipse OK
Ubuntu 6.06 LTS, Dapper Drake
When booting the Live/Install CD, adjust the boot options to add the following:
`noacpi acpi=off apm=on`
Sometimes the CD may stall on boot with a blank black screen. Trying again with "Safe Graphics" mode may help. (Or prehaps this is the same X issue with the Edgy Live CD, and it is simply trying again that helps).
Once booted, suspend and resume using Fn-F4 was successfully tested running from the LiveCD. However, in at least a couple of cases, the Live CD froze at seemingly random points shortly after resuming.
Results from a complete install still need to be documented.
See Also
Because the models are very similar, Installing Ubuntu on a ThinkPad T21 may also be helpful.
External Resources
- Bookmarks tagged with Ubuntu and T20 on del.icio.us
- Forum posts tagged with T20 on ubuntuforums.org
