Difference between revisions of "Wacom Serial Tablet PC Stylus"
| Line 14: | Line 14: | ||
=== XOrg Wacom driver === | === XOrg Wacom driver === | ||
| − | The pen uses serial and appears on some /dev/ttySnn device where nn is a number. An easy way to find it is to map /dev/ttyS0 to the pen's port and irq. The values can be found under the windows driver properties. Using values from an {{ | + | The pen uses serial and appears on some {{path|/dev/ttySnn}} device where <tt>nn</tt> is a number. An easy way to find it is to map {{path|/dev/ttyS0}} to the pen's port and irq. The values can be found under the windows driver properties. Using values from an {{X41T}} 1869-5CU, the command is: {{cmdroot|setserial /dev/ttyS0 port 0x0200 irq 5 autoconfig}}. |
This may be inserted into startup scripts in {{path|/etc/rc.d/}} | This may be inserted into startup scripts in {{path|/etc/rc.d/}} | ||
| Line 45: | Line 45: | ||
Check the wacom driver man page and website for other options. | Check the wacom driver man page and website for other options. | ||
| + | ==Models featuring this Device== | ||
| + | *ThinkPad {{X41T}} | ||
[[Category:Components]] | [[Category:Components]] | ||
Revision as of 23:53, 7 August 2005
| Wacom Logo |
Wacom Serial Tablet PC StylusThis is a stylus made for tablet PCs by Wacom. Features
|
XOrg Wacom driver
The pen uses serial and appears on some /dev/ttySnn device where nn is a number. An easy way to find it is to map /dev/ttyS0 to the pen's port and irq. The values can be found under the windows driver properties. Using values from an X41 Tablet 1869-5CU, the command is: # setserial /dev/ttyS0 port 0x0200 irq 5 autoconfig.
This may be inserted into startup scripts in /etc/rc.d/
The X config file needs to be changed to use the stylus. Add the following sections to your xorg.conf:
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/ttyS0"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"
Option "Mode" "Absolute"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/ttyS0"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"
EndSection
Add the following lines to the ServerLayout section:
InputDevice "cursor" "SendCoreEvents" InputDevice "stylus" "SendCoreEvents"
Check the wacom driver man page and website for other options.
Models featuring this Device
- ThinkPad X41 Tablet
