Difference between revisions of "ThinkPad 11a/b/g/n Wireless LAN Mini Express Adapter"
(→Hardware switch) |
(→Hardware switch) |
||
| Line 89: | Line 89: | ||
[[Image:Wireless-switch.png|(ThinkPad R60 radio switch in the ON position)]] | [[Image:Wireless-switch.png|(ThinkPad R60 radio switch in the ON position)]] | ||
| − | In addition to hard-switching the wireless card, the switch also generates an [Acpid|acpi event] on transition from hi->lo and vice versa. It is however the same event regardless of the direction. | + | In addition to hard-switching the wireless card, the switch also generates an [[Acpid|acpi event]] on transition from hi->lo and vice versa. It is however the same event regardless of the direction. |
=== ThinkPads this card may be found in === | === ThinkPads this card may be found in === | ||
Revision as of 08:54, 15 June 2007
ThinkPad 11a/b/g/n Wireless LAN Mini Express AdapterThis is a WiFi Adapter that is installed in a Mini-PCI Express slot Features
|
|
Different chipsets
There are at least two chipsets which are both referred to by Lenovo as "ThinkPad 11a/b/g/n". To find out which one you have you may have to update your pci id list. You can then use this list to identify the hardware on your pci bus.
#update-pciids #lspci 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02) 00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02) 00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02) 02:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller 03:00.0 Network controller: Atheros Communications, Inc. AR5418 802.11a/b/g/n Wireless PCI Express Adapter (rev 01) 15:00.0 CardBus bridge: Texas Instruments PCI1510 PC card Cardbus Controller
In this case, the wireless card is in the second to last line of the output from lspci.
IBM Partnumbers
42T0825 [1]
Linux WiFi driver
There's now (04.04.07) added experimental support for the AR5008 chipset to a new branch in MadWifi. I have compiled this driver successfully, but it's still at an experimental stage, so no promises are given. Howto
There is an old ticket for this card at madwifi, #1001.
There is an new ticket for this card at madwifi-branch, #1243.
To install this driver, just checkout the branch madwifi-hal-0.9.30.13.
mkdir /tmp/madwifi cd /tmp/madwifi svn checkout http://svn.madwifi.org/branches/madwifi-hal-0.9.30.13/ cd madwifi-hal-0.9.30.13/ make make install *choose [r] reboot
News fron the madwifi-branch:
* milestone changed from version 0.9.x - progressive release candidate phase to version 0.9.4. FYI: the madwifi-hal-0.9.30.13 branch has been merged to trunk (and the branch has been removed). If you don't want to wait until the next release (v0.9.4), you could go with a snapshot or checkout from trunk - just make sure that your code is >= r2360.
Until the madwifi driver stabilizes you might want to get the Windows driver from Lenovo's support site and use a recent version of ndiswrapper (>= 1.29). I've compiled a Howto for this card.
AR5418 is still to new?
If anyone is able to get the AR5418 to work with madwifi, please add your procedure for getting it to work - in the meantime, ndiswrapper works with the windows driver.
Update 10.06.2007 from Stevie:
I have the AR5418 chipset and with the snapshot release r2431 this chipset works (with wpa-psk). Just try it...
Hardware switch
Some ThinkPads have a hardware switch that must be in the on position for the radio to work, regardless of driver state:
In addition to hard-switching the wireless card, the switch also generates an acpi event on transition from hi->lo and vice versa. It is however the same event regardless of the direction.
