Difference between revisions of "Talk:Problem with display remaining black after resume"
| Line 2: | Line 2: | ||
If you want to be able to resume, you need : | If you want to be able to resume, you need : | ||
| − | + | * To start from a VT | |
| − | + | * No option acpi_sleep | |
| − | + | * to save the PCI state like: | |
| − | + | cat /proc/bus/pci/00/02.0 > /var/cache/video.config | |
| − | + | * Once you get back, restore it: | |
| − | + | cat /var/cache/video.config > /proc/bus/pci/00/02.0 | |
However, the X screen is not clean after the restore, so this is not very useable... | However, the X screen is not clean after the restore, so this is not very useable... | ||
Revision as of 21:30, 8 August 2005
From my experience, this does not work with TP R50e.
If you want to be able to resume, you need :
- To start from a VT
- No option acpi_sleep
- to save the PCI state like:
cat /proc/bus/pci/00/02.0 > /var/cache/video.config
- Once you get back, restore it:
cat /var/cache/video.config > /proc/bus/pci/00/02.0
However, the X screen is not clean after the restore, so this is not very useable...
