Difference between revisions of "Thermal Sensors"
m (→Patch for accessing the extra ACPI sensors through <tt>thermal</tt>) |
(→Patch for accessing the extra ACPI sensors through <tt>thermal</tt>) |
||
| Line 33: | Line 33: | ||
:{{cmdroot|cat /proc/acpi/ibm/thermal}} | :{{cmdroot|cat /proc/acpi/ibm/thermal}} | ||
:{{cmdresult|temperatures: 44 41 33 42 33 -128 30 -128 40 48 43}} | :{{cmdresult|temperatures: 44 41 33 42 33 -128 30 -128 40 48 43}} | ||
| + | |||
| + | If you apply this patch in conjunction with [[ACPI_fan_control_script#Comprehensive_bash_script_with_fine_control_over_fan_speed|tp-fancontrol]], make sure you use version 0.2.9 or higher. | ||
===HDAPS temperature sensor=== | ===HDAPS temperature sensor=== | ||
Revision as of 01:52, 19 July 2006
|
This page summarizes known information about the locations and properties of thermal sensors on ThinkPad laptops. |
Accessing the sensors
Basic ACPI system temperature sensors
The primary means of accessing the thermal sensors is through the ibm-acpi module. When the module is loaded, the first 8 sensors (some of which may be inactive) are shown in /proc/acpi/ibm/thermal:
# cat /proc/acpi/ibm/thermaltemperatures: 44 41 33 42 33 -128 30 -128
A value of -128 (i.e., 0x80 hex) means the sensor is not connected. For example, above the two -128 values belong to the UltraBay battery, which is not plugged in.
Extra ACPI system temperature sensors
On recent ThinkPad models, three extra sensors are accessible through ACPI at Embedded Controller offsets 0xC0 to 0xC2. There are two ways to access them:
Accessing the extra ACPI sensors through ecdump
Load ibm-acpi with the experimental=1 option, and parse /proc/acpi/ibm/ecdump:
# perl -ne 'm/^EC 0xc0: .(..) .(..) .(..) / or next; print hex($1)." ".hex($2)." ".hex($3)."\n"' < /proc/acpi/ibm/ecdump40 48 43
Future models might provide additional extra sensors beyond those three. To see all candidates:
# perl -ne 'print join(" ",map(hex,m/\w+/g))."\n" if s/^EC 0xc0://' < /proc/acpi/ibm/ecdump40 48 43 128 128 128 128 128 0 0 0 0 0 0 0 0
Patch for accessing the extra ACPI sensors through thermal
Apply this kernel patch to ibm-acpi to make the extra 3 sensors show up on /proc/acpi/ibm/thermal, just like the first 8:
# cat /proc/acpi/ibm/thermaltemperatures: 44 41 33 42 33 -128 30 -128 40 48 43
If you apply this patch in conjunction with tp-fancontrol, make sure you use version 0.2.9 or higher.
HDAPS temperature sensor
The Active Protection System accelerometer also reports a temperature, which is identical to one of the ACPI sensors. The corresponding sensor is actually not inside the HDAPS chip, but fairly close.
# cat /sys/bus/platform/drivers/hdaps/hdaps/temp141
Harddisks SMART temperature sensor
Finally, the system hard disk temperature can be read through the disk's SMART interface:
# smartctl -A /dev/hda194 Temperature_Celsius 0x0022 145 097 000 Old_age Always - 31
Or, for SATA-equipped models running a recent Linux kernel (see Problems with SATA and Linux):
# smartctl -A -d ata /dev/sda194 Temperature_Celsius 0x0022 145 097 000 Old_age Always - 31
When the UltraBay Slim HDD Adapter or UltraBay Slim SATA HDD Adapter are used, the second hard disk will typically provide another temperature readout via its SMART interface, analogously to the above.
Utilities for viewing temperatures
The following utilities display the ThinkPad-specific thermal sensor readouts:
- The above shell commands.
- The "Sensors" builtin of gkrellm can show 6 specific ACPI sensors (out of up to 11).
- CPU Info is a KDE applet that can display the 8 first ACPI sensors as well as the HDAPS sensor. Limited to showing one sensor at a time.
- IBMDoK, another KDE applet. Shows 4 specific sensors (out of up to 11). So far only tested at the T60.
Sensor locations
This information is model specific.
ThinkPad R51
The ibm-acpi documentation includes the report by Thomas Gruber:
EC offset Index in "thermal" Location (estimated) 0x78 1 CPU 0x79 2 Mini-PCI 0x7A 3 HDD 0x7B 4 GPU 0x7C 5 System battery 0x7D 6 UltraBay battery 0x7E 7 System battery 0x7F 8 UltraBay battery 0xC0 none ? 0xC1 none ? 0xC2 none ?
ThinkPad T40
The location of one of the sensors is identified here.
EC offset Index in "thermal" Location (estimated) 0x78 1 CPU 0x79 2 System board under rear left corner of Mini-PCI module 0x7A 3 ? 0x7B 4 GPU 0x7C 5 Battery 0x7D 6 n/a 0x7E 7 Battery 0x7F 8 n/a 0xC0 none n/a 0xC1 none n/a 0xC2 none n/a
ThinkPad T43, T43p
Found by Shmidoax using cooling spray to cool down components and observe the effect on the sensors.
EC offset Index in "thermal" Location (estimated) 0x78 1 CPU 0x79 2 Between PCMCIA slot and CPU (same as HDAPS module) 0x7A 3 PCMCIA slot 0x7B 4 GPU 0x7C 5 System battery (front left = charging circuit) 0x7D 6 UltraBay battery? 0x7E 7 System battery (rear right) 0x7F 8 UltraBay battery? 0xC0 none Bus between Northbridge and DRAM 0xC1 none Southbridge (under Mini-PCI card, under touchpad) 0xC2 none Power circuitry, on underside of system board under F2 key
| Photos (click to see full size) |
ThinkPad T60
Found by Marco Kraus for use in IBMDok.
EC offset Index in "thermal" Location (estimated) 0x78 1 CPU 0 0x79 2 HDD 0x7A 3 HDD 0x7B 4 GPU 0x7C 5 Battery 0x7D 6 n/a 0x7E 7 Battery 0x7F 8 n/a 0xC0 none ? 0xC1 none ? 0xC2 none ?
The CPU thermal sensors seem to be exposed in both /proc/acpi/thermal_zone/THM0/temperature and /proc/acpi/thermal_zone/THM1/temperature, though the latter curiously seems to exist only in this file and nowhere in /proc/acpi/ibm/ecdump.
