Talk:SMAPI support for Linux

Great, great work! Really! This completely rocks. I just stopped my battery from charging at 77% and restarted charging a bit later, no problems whatsoever. BTW, this is on kernel 2.6.14.3.

--spiney 21:25, 5 Dec 2005 (CET)

---

None of the fuctions is working on my T40, kernel 2.6.14-mm2.

--lammic, 2005.12.05

Works for me on a T41 running 2.6.12-10-686 (Ubuntu 5.10).

--berndtnm, 2005.12.06

Including stop_charge_thresh? That one seems to be missing on the T42p.

--Thinker 00:46, 7 Dec 2005 (CET)

---

tp_smapi works just fine on an R52 with Ubuntu Breezy stock kernel.

--Micampe 12:52, 7 Dec 2005 (CET)

---

To set the thresholds for starting and stopping battery charging (in percent of current capacity):

current really? That'd be weird, I'd expect it to be percent of total capacity.

--Micampe 14:39, 7 Dec 2005 (CET)

"Current full charge capacity", as opposed to "current remaining capacity" or "designed full charge capacity"...

--Thinker 15:05, 7 Dec 2005 (CET)

---

Battery features don't work with my T41p. I can't check this with windows. Can anybody try these features?

-- Nils, 7 Dec 2005

---

Nils, does cdrom_speed work for you on the T41p? Could you provide the details requested in the README (dmesg etc.)?

--Thinker 21:57, 7 Dec 2005 (CET)

---

CDRom Speed seems to work. (I see no warnings, but I have to do a speed test.) Now, I've send all outputs to the email-address in the readme.

-- Nils, 8 Dec 2005

---

All the features except the stop_charge_thresh seem to work here on a t42p. One note, the start_charge_thresh seems to really be stop_charge_thresh. Ie, If I set that to lower than my current battery %, it will never charge, and if I set it to 100 the battery charges all the way.

--Nirik 16 Dec 2005

---

Changing the CD speed when the CD is being accessed will hang your computer

I don't have this problem on my T40p. CDROM is mounted and file on CD is opened. Change speed do not hang my system.

-- Stefan Schmidt

---

An open file looks fine if you're not reading/writing at that point. But my T43 does hangs on this:

# dd if=/dev/scd0 of=/dev/null &
# echo 1 > /sys/devices/platform/smapi/cdrom_speed

--Thinker 16:41, 7 Dec 2005 (CET)

---

OK, sorry. I was to fast. My system hangs on this commands, too. :(

-- Stefan Schmidt

Works well. Great.

T42 2373-8zh. Working :cdrom_speed and start_charge_thresh. Untest : inhibit_charge_minutes.

-- Haifeng Chen

cdrom_speed works on my T40.

-- lammic, 2005.12.09

"thinkpad" module kernel compatibility

Ajunge, how do you compile the "thinkpad" module compile on kernel >=2.6.9? The latest thinkpad version (5.8) still uses "get_cpu_ptr" and "set_cpu_ptr", which were removed in 2.6.9.

--Thinker 13:53, 10 Dec 2005 (CET)

---

Kernel Patch?

Hello Thinker,

would it be possible to provide the SMAPI support as kernel patch as well? Something along the lines of: (0.12 against 2.6.15-rc5)

diff -Nrp drivers/acpi.orig/Kconfig drivers/acpi/Kconfig
*** drivers/acpi.orig/Kconfig   Thu Dec 15 19:58:21 2005
--- drivers/acpi/Kconfig        Fri Dec 16 10:30:51 2005
*************** config ACPI_IBM
*** 206,211 ****
--- 206,221 ----

          If you have an IBM ThinkPad laptop, say Y or M here.

+ config ACPI_IBM_SMAPI
+       tristate "IBM ThinkPad SMAPI Support"
+       depends on X86
+       ---help---
+         This adds SMAPI support on IBM ThinkPads, mostly used for battery 
+         charge control. For more information about this driver see
+         <http://www.thinkwiki.org/wiki/SMAPI_support_for_Linux> .
+ 
+         If you have an IBM ThinkPad laptop, say Y or M here.
+ 
  config ACPI_TOSHIBA
        tristate "Toshiba Laptop Extras"
        depends on X86
diff -Nrp drivers/acpi.orig/Makefile drivers/acpi/Makefile
*** drivers/acpi.orig/Makefile  Thu Dec 15 19:58:21 2005
--- drivers/acpi/Makefile       Fri Dec 16 10:27:36 2005
*************** obj-$(CONFIG_ACPI_DEBUG)        += debug.o
*** 54,59 ****
--- 54,60 ----
  obj-$(CONFIG_ACPI_NUMA)               += numa.o
  obj-$(CONFIG_ACPI_ASUS)               += asus_acpi.o
  obj-$(CONFIG_ACPI_IBM)                += ibm_acpi.o
+ obj-$(CONFIG_ACPI_IBM_SMAPI)  += tp_smapi.o
  obj-$(CONFIG_ACPI_TOSHIBA)    += toshiba_acpi.o
  obj-y                         += scan.o motherboard.o
  obj-$(CONFIG_ACPI_HOTPLUG_MEMORY)     += acpi_memhotplug.o
diff -Nrp drivers/acpi.orig/tp_smapi.c drivers/acpi/tp_smapi.c
*** drivers/acpi.orig/tp_smapi.c        Thu Jan  1 01:00:00 1970
--- drivers/acpi/tp_smapi.c     Fri Dec 16 10:27:10 2005
***************
*** 0 ****
--- 1,1318 ----

Deleted the tp_smapi.c file at the end, out of obvious reasons, and I'm not sure about the placement in the ACPI section, OTOH there it would be found easily next to ibm_acpi.

Providing a patch would help when recompiling the kernel often, I hate recompiling external modules every time (even got me a kernel-upgrade script to do most of it automatically). But of course it's up to you. :)

--spiney 09:52, 16 Dec 2005 (CET)

---