Difference between revisions of "Wacom Serial Tablet PC Stylus"
m (Mention the Eraser in the xorg.conf →Linux Support) |
(mention setserial and suspend/resume →Linux Support) |
||
| Line 15: | Line 15: | ||
The pen is supported by the XFree/Xorg Wacom driver. | The pen is supported by the XFree/Xorg Wacom driver. | ||
| − | The pen uses serial and appears on some {{path|/dev/ttySnn}} device where <tt>nn</tt> is a number. An easy way to find it is to map {{path|/dev/ttyS0}} to the pen's port and irq. The values can be found under the windows driver properties. Using values from an {{X41T}} 1869-5CU, the command is: {{cmdroot|setserial /dev/ttyS0 port 0x0200 irq 5 autoconfig}}. | + | The pen uses serial and appears on some {{path|/dev/ttySnn}} device where <tt>nn</tt> is a number. An easy way to find it is to map {{path|/dev/ttyS0}} to the pen's port and irq. The values can be found under the windows driver properties. Using values from an {{X41T}} 1869-5CU, the command is: {{cmdroot|setserial /dev/ttyS0 port 0x0200 irq 5 autoconfig}} (you need to run this after every suspend/resume cycle). |
This may be inserted into startup scripts in {{path|/etc/rc.d/}} | This may be inserted into startup scripts in {{path|/etc/rc.d/}} | ||
Revision as of 17:12, 1 December 2005
| Wacom Logo |
Wacom Serial Tablet PC StylusThis is a stylus made for tablet PCs by Wacom. Features
|
Linux Support
The pen is supported by the XFree/Xorg Wacom driver.
The pen uses serial and appears on some /dev/ttySnn device where nn is a number. An easy way to find it is to map /dev/ttyS0 to the pen's port and irq. The values can be found under the windows driver properties. Using values from an X41 Tablet 1869-5CU, the command is: # setserial /dev/ttyS0 port 0x0200 irq 5 autoconfig (you need to run this after every suspend/resume cycle).
This may be inserted into startup scripts in /etc/rc.d/
The X config file needs to be changed to use the stylus. Add the following sections to your xorg.conf:
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/ttyS0"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"
Option "Mode" "Absolute"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/ttyS0"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/ttyS0"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"
EndSection
Add the following lines to the ServerLayout section:
InputDevice "cursor" "SendCoreEvents" InputDevice "stylus" "SendCoreEvents"
Check the wacom driver man page and website for other options.
Models featuring this Device
- ThinkPad X41 Tablet
