Difference between revisions of "Installing Debian Sid on a ThinkPad T500"
m (→Not working) |
(→Hard drive issues) |
||
| (36 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | = Before installation = | + | = Configuration = |
| − | + | The model number is '''2082-6PG'''. | |
| + | |||
| + | == lspci == | ||
| + | 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) | ||
| + | 00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07) | ||
| + | 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) | ||
| + | 00:03.0 Communication controller: Intel Corporation Mobile 4 Series Chipset MEI Controller (rev 07) | ||
| + | 00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03) | ||
| + | 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) | ||
| + | 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) | ||
| + | 00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) | ||
| + | 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) | ||
| + | 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) | ||
| + | 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) | ||
| + | 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) | ||
| + | 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) | ||
| + | 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03) | ||
| + | 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) | ||
| + | 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) | ||
| + | 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) | ||
| + | 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) | ||
| + | 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) | ||
| + | 00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03) | ||
| + | 00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03) | ||
| + | 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) | ||
| + | 01:00.0 VGA compatible controller: ATI Technologies Inc Mobility Radeon HD 3650 | ||
| + | 03:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100 | ||
| + | 15:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba) | ||
| + | 15:00.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04) | ||
| + | 15:00.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 21) | ||
| + | 15:00.3 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev ff) | ||
| + | 15:00.4 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 11) | ||
| + | 15:00.5 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 11) | ||
| + | |||
| + | == lsusb == | ||
| + | Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub | ||
| + | Bus 007 Device 004: ID 17ef:4807 Lenovo | ||
| + | Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub | ||
| + | Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub | ||
| + | Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub | ||
| + | Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub | ||
| + | Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub | ||
| + | Bus 002 Device 004: ID 0a5c:2145 Broadcom Corp. | ||
| + | Bus 002 Device 002: ID 08ff:2810 AuthenTec, Inc. | ||
| + | Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub | ||
| + | Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub | ||
| + | |||
| + | |||
| + | |||
| + | = Before the installation = | ||
| + | I switched to "discrete graphics" (Intel 4500MHD) in the BIOS. I didn't want to use with the ATI card because of the driver issues. After the installation, I reverted to "switchable graphics" and it works well. | ||
= Installation = | = Installation = | ||
| − | + | I used an (amd64) USB image (hd-media) and the Lenny RC1 netinstall ISO. The install sequence went flawlessly. The Gigabit Ethernet adapter was detected and configured. I installed without X, switched to sid in sources.list and then went for X and Gnome. | |
| − | + | After installation I compiled a vanilla 2.6.28 that I'm currently running. | |
= Working = | = Working = | ||
| + | More or less out of the box with the 2.6.28 kernel: | ||
* Gigabit Ethernet (e1000 module) | * Gigabit Ethernet (e1000 module) | ||
* 5300AGN wireless (iwlagn) with CRDA userspace regulation | * 5300AGN wireless (iwlagn) with CRDA userspace regulation | ||
| − | * Intel graphics, driver from sid repository | + | * Intel graphics, X driver from sid repository |
* suspend to ram (echo mem > /sys/power/state OR Fn+F4) | * suspend to ram (echo mem > /sys/power/state OR Fn+F4) | ||
* sound (HDA) + volume control buttons | * sound (HDA) + volume control buttons | ||
| + | * Bluetooth | ||
| + | * webcam (UVC driver, tested with guvcview) | ||
| + | * card reader | ||
| + | * watchdog timer (iTCO_wdt kernel module and the watchdog daemon) | ||
| + | |||
| + | == HDAPS == | ||
| + | The source package in the sid repository for tp_smapi is a bit outdated, so I compiled and installed using the [http://sourceforge.net/project/showfiles.php?group_id=1212&package_id=171579 tarball] for SourceForge. | ||
| + | |||
| + | In order to get the OpenGL visualization utility (hdaps-gl) and the head parking daemon (hdapsd) working properly: | ||
| + | * create /etc/modprobe.d/hdaps , containing: | ||
| + | options thinkpad_ec force_io=1 | ||
| + | options hdaps invert=1 | ||
| + | * add the following line to ''/etc/modules'': | ||
| + | hdaps | ||
| + | * install '''hdapsd''', which creates the required udev rule (''/etc/udev/rules.d/z60_hdapsd.rules''). I used the 1:0.0.20081004-1 version of the package, as it was required by the new sysfs interface in 2.6.28. | ||
| + | * '''However''', if you don't want hdapsd (i.e. just want accelerometer data with no head parking), you can create a rule containing: | ||
| + | KERNEL=="event[0-9]*", ATTRS{phys}=="hdaps/input1",ATTRS{modalias}=="input:b0019v1014p5054e4801-*",SYMLINK+="input/hdaps/accelerometer-event | ||
| + | * install '''hdaps-utils''' | ||
| + | |||
| + | |||
= Not working = | = Not working = | ||
* mute button | * mute button | ||
| + | * fingerprint reader, seems there's no driver yet | ||
= Not tested = | = Not tested = | ||
| + | * DisplayPort | ||
| + | * modem | ||
| − | + | [[Category:T500]][[Category:Debian]] | |
| − | |||
| − | |||
| − | [[Category:T500]] | ||
Latest revision as of 19:44, 6 February 2009
Contents
Configuration
The model number is 2082-6PG.
lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:03.0 Communication controller: Intel Corporation Mobile 4 Series Chipset MEI Controller (rev 07) 00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03) 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 01:00.0 VGA compatible controller: ATI Technologies Inc Mobility Radeon HD 3650 03:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100 15:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba) 15:00.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04) 15:00.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 21) 15:00.3 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev ff) 15:00.4 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 11) 15:00.5 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 11)
lsusb
Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 007 Device 004: ID 17ef:4807 Lenovo Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 004: ID 0a5c:2145 Broadcom Corp. Bus 002 Device 002: ID 08ff:2810 AuthenTec, Inc. Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Before the installation
I switched to "discrete graphics" (Intel 4500MHD) in the BIOS. I didn't want to use with the ATI card because of the driver issues. After the installation, I reverted to "switchable graphics" and it works well.
Installation
I used an (amd64) USB image (hd-media) and the Lenny RC1 netinstall ISO. The install sequence went flawlessly. The Gigabit Ethernet adapter was detected and configured. I installed without X, switched to sid in sources.list and then went for X and Gnome.
After installation I compiled a vanilla 2.6.28 that I'm currently running.
Working
More or less out of the box with the 2.6.28 kernel:
- Gigabit Ethernet (e1000 module)
- 5300AGN wireless (iwlagn) with CRDA userspace regulation
- Intel graphics, X driver from sid repository
- suspend to ram (echo mem > /sys/power/state OR Fn+F4)
- sound (HDA) + volume control buttons
- Bluetooth
- webcam (UVC driver, tested with guvcview)
- card reader
- watchdog timer (iTCO_wdt kernel module and the watchdog daemon)
HDAPS
The source package in the sid repository for tp_smapi is a bit outdated, so I compiled and installed using the tarball for SourceForge.
In order to get the OpenGL visualization utility (hdaps-gl) and the head parking daemon (hdapsd) working properly:
- create /etc/modprobe.d/hdaps , containing:
options thinkpad_ec force_io=1 options hdaps invert=1
- add the following line to /etc/modules:
hdaps
- install hdapsd, which creates the required udev rule (/etc/udev/rules.d/z60_hdapsd.rules). I used the 1:0.0.20081004-1 version of the package, as it was required by the new sysfs interface in 2.6.28.
- However, if you don't want hdapsd (i.e. just want accelerometer data with no head parking), you can create a rule containing:
KERNEL=="event[0-9]*", ATTRS{phys}=="hdaps/input1",ATTRS{modalias}=="input:b0019v1014p5054e4801-*",SYMLINK+="input/hdaps/accelerometer-event
- install hdaps-utils
Not working
- mute button
- fingerprint reader, seems there's no driver yet
Not tested
- DisplayPort
- modem
