Difference between revisions of "Talk:ThinkLight"
m |
m (→T430 with RHEL: - still occuring in rhel 6.7) |
||
(3 intermediate revisions by 2 users not shown) | |||
Line 27: | Line 27: | ||
[/code] | [/code] | ||
+ | |||
+ | === T430 with RHEL === | ||
+ | |||
+ | Red Hat Enterprise Linux Workstation release 6.5 & 6.7 (Santiago) | ||
+ | |||
+ | Thinkpad_acpi is loaded. | ||
+ | |||
+ | These don't work: | ||
+ | |||
+ | echo 255 > /sys/class/leds/tpacpi\:\:thinklight/brightness | ||
+ | |||
+ | echo 0 > /sys/class/leds/tpacpi\:\:thinklight/brightness | ||
+ | |||
+ | |||
+ | Start at no-light, '0' in brightness | ||
+ | |||
+ | Fn-Space: Low backlight - still 0 | ||
+ | |||
+ | Fn-Space: High backlight - still 0 | ||
+ | |||
+ | Fn-Space: Backlight off, thinklight on - 255 | ||
+ | |||
+ | Fn-Space: back to start - back to 0 | ||
+ | |||
+ | === T530 with Debian === | ||
+ | The ACPI hooks are there but not functional - likely needs a bit in | ||
+ | /etc/modprobe.d/ | ||
+ | Similar to what one needs to enable fan control - but I can't find any documentation. |
Latest revision as of 14:49, 6 July 2016
[code]
- !/usr/bin/perl
use strict; use warnings;
- $count
my $count = $ARGV[0];
if ( ! defined($count) || $count < 1 )
{ $count = 1; }
$|=1;
for(my $i=0;$i<$count;$i++) { open(LICHT,">/proc/acpi/ibm/light"); print LICHT "on\n"; close(LICHT); select(undef,undef,undef,0.25); open(LICHT,">/proc/acpi/ibm/light"); print LICHT "off\n"; close(LICHT); select(undef,undef,undef,0.25); }
[/code]
T430 with RHEL
Red Hat Enterprise Linux Workstation release 6.5 & 6.7 (Santiago)
Thinkpad_acpi is loaded.
These don't work:
echo 255 > /sys/class/leds/tpacpi\:\:thinklight/brightness
echo 0 > /sys/class/leds/tpacpi\:\:thinklight/brightness
Start at no-light, '0' in brightness
Fn-Space: Low backlight - still 0
Fn-Space: High backlight - still 0
Fn-Space: Backlight off, thinklight on - 255
Fn-Space: back to start - back to 0
T530 with Debian
The ACPI hooks are there but not functional - likely needs a bit in
/etc/modprobe.d/
Similar to what one needs to enable fan control - but I can't find any documentation.