Difference between revisions of "Ericsson H5321 gw Mobile Broadband Module"
m (Category Edge added) |
|||
| Line 291: | Line 291: | ||
[[Category:Edge Twist]] | [[Category:Edge Twist]] | ||
| − | [[Category: | + | [[Category:E Series]] |
[[Category:L430]] | [[Category:L430]] | ||
[[Category:T430s]] | [[Category:T430s]] | ||
Revision as of 13:47, 9 December 2013
Ericsson H5321 gw Mobile Broadband ModuleThis is a Ericsson WWAN Adapter that is installed in a Mini-PCI Express slot Features
|
Contents
Lenovo Partnumbers
- FRU 0A36319
Overview
Using
for n in `ls /sys/class/*/*{ACM,wdm}*/device/interface`;do echo $(echo $n|awk -F '/' '{print $5}') : $(cat $n);done
the card identifies it's interfaces as
ttyACM0 : H5321 gw Mobile Broadband Modem ttyACM1 : H5321 gw Mobile Broadband Data Modem ttyACM2 : H5321 gw Mobile Broadband GPS Port cdc-wdm0 : H5321 gw Mobile Broadband Device Management cdc-wdm1 : H5321 gw Mobile Broadband USIM Port
Wireless Modem
The card works out of the box with the cdc_acm driver using NetworkManager tested on openSUSE 12.2 and 12.3.
GPS
Basically, the NMEA stream can be activated the same way as described in Ericsson F3507g Mobile Broadband Module#Using the card as a GPS receiver. E.g., to configure the GPS receiver to update every second and turn DGPS on, do # echo -e "AT*E2GPSCTL=1,1,1\r" >/dev/ttyACM1. Then, the NMEA stream on /dev/ttyACM2 is activated by # echo -e "AT*E2GPSNPD\r" >/dev/ttyACM2. However, the stream ends as soon as the /dev/ttyACM2 device file is no longer opened.
gpsd
# gpsd /dev/ttyACM2 will wait for a client, e.g. $ xgps, before opening the /dev/ttyACM2 device file and polling GPS. Therefore, # echo -e "AT*E2GPSNPD\r" >/dev/ttyACM2 is needed after the first client connects. When the last client is closed, the device file will be closed and the NMEA stream stops.
Mobile Broadband Modules
There is an unmaintained project Mobile Broadband Modules created by Ericsson. It does not support the H5321 gw, the daemon won't start using modern kernels [1] and the GUI won't compile with latest glib.
Here is someone who seems to have got something to work recently [2]
Using a recent distribution, it is possible to get the mbm-gpsd compiling and running. You need to install basic C development packages. Using openSUSE 12.3, the following additional packages are needed: dbus-1-devel, dbus-1-glib-devel, libudev-devel, libnl-1, mozilla-nss-devel, mozilla-nspr-devel, gtk-doc, docbook-dsssl-stylesheets, docbook-xsl-stylesheets, docbook_3, docbook_4, iso_ent, libsource-hightlight4, libxslt-tools, openjade, source-highlight, and xmlcharent. Furthermore, you must add "--disable-more-warnings" to the autogen.sh command line and modify the provided udev rule to support the H5321 gw.
--- utils/99-mbm.rules 2013-04-01 14:22:17.789546987 +0200
+++ /etc/udev/rules.d/99-mbm.rules 2013-04-02 19:35:03.361210978 +0200
@@ -10,9 +10,11 @@
ATTRS{idVendor}=="413c", ATTRS{idProduct}=="8147|8183|8184|818d", ENV{.MBM_USBIFNUM}=="09", ENV{MBM_CAPABILITY}="gps_nmea"
ATTRS{idVendor}=="0930", ATTRS{idProduct}=="130b|130c|1311", ENV{.MBM_USBIFNUM}=="09", ENV{MBM_CAPABILITY}="gps_nmea"
ATTRS{idVendor}=="0bdb", ATTRS{idProduct}=="1900|1902|1904|1905|1906|1907|1911|190d", ENV{.MBM_USBIFNUM}=="09", ENV{MBM_CAPABILITY}="gps_nmea"
+ATTRS{idVendor}=="0bdb", ATTRS{idProduct}=="1926", ENV{ID_USB_INTERFACE_NUM}=="09", ENV{MBM_CAPABILITY}="gps_nmea"
ATTRS{idVendor}=="413c", ATTRS{idProduct}=="8147|8183|8184|818d", ENV{.MBM_USBIFNUM}=="05", ENV{MBM_CAPABILITY}="gps_ctrl"
ATTRS{idVendor}=="0930", ATTRS{idProduct}=="130b|130c|1311", ENV{.MBM_USBIFNUM}=="05", ENV{MBM_CAPABILITY}="gps_ctrl"
ATTRS{idVendor}=="0bdb", ATTRS{idProduct}=="1900|1902|1904|1905|1906|1907|1911|190d", ENV{.MBM_USBIFNUM}=="05", ENV{MBM_CAPABILITY}="gps_ctrl"
+ATTRS{idVendor}=="0bdb", ATTRS{idProduct}=="1926", ENV{ID_USB_INTERFACE_NUM}=="03", ENV{MBM_CAPABILITY}="gps_ctrl"
LABEL="mbm_end"
Command set at /dev/ttyACM1
* &C +CACM +CAMM +CBST +CCHC +CCHO +CCLK +CCWE +CEAP +CEER +CERP +CFUN +CGACT +CGATT +CGCLASS +CGCMOD +CGDCONTRES +CRLA +CRLP +CRSM +CSAS +CSCA +CSCB +CSCS +CSMS +CSQ +CUAD +CUSD +CVHU &D E *E2ARME *E2ARMEFLUSH *E2ARMEOP*EESIMSWAP *EETIME *EEVINFO *EFDORM *EGNCI *EGPSSAT *EGSCI *EIAAUR *EIAAUW *EIAC *EIAD *EIAIPCPR *EIAIPCPW *EIAPSR *EIAPSW *
Command set at GPS port /dev/ttyACM2
* &C +CACM +CAMM +CBST +CCHC +CCHO +CCLK +CCWE +CEAP +CEER +CERP +CFUN +CGACT +CGATT +CGCLASS +CGCMOD +CGDCONT +CGEQMIN +CGEQNEG +CGEQREQ +CGEREP +CGLA +CGMI +CGMM +CGMR +CGPADDR +CGQMIN +CGQREQ +CGREG +CGSMS +CGSN +CGTFTRDP +CHSU +CIMI +CIND +CLAC +CLCK +CMEC +CMEE +CMER +CMGC +CMGD +CMGF +CMGL +CMGR +CMGS +CMGW +CMMS +CMOLR +CMOLRE +CMSS +CMUX +CNMI +CNUM +COPN +COPS +CPBF +CPBR +CPBS +CPBW +CPIN +CPMS +CPOL +CPUC +CPWD +CR +CRC +CREG +CRES +CRLA +CRLP +CRSM +CSAS +CSCA +CSCB +CSCS +CSMS +CSQ +CUAD +CUSD +CVHU &D E *E2ARME *E2ARMEFLUSH *E2ARMEOPM *E2ARMETIME *E2CFUN *E2CHAN *E2GPSCLM *E2GPSCTL *E2GPSEPH *E2GPSLOC *E2GPSNPD *E2GPSPOS *E2GPSQUALITY *E2GPSSTAT *E2GPSSUPL *E2GPSSUPLNI *E2GPSSUPLNIREPLY *E2GPSTIME *E2IPCFG *E2NAP *E2OTR *E2REG *E2RESET *EATTM *ECSP *EECUST *EECUSTPAGE *EEGPSEECLM *EEGPSEEDATA *EEGPSEESTAT *EEGPSNMEA *EELED *EEMAPPSETTING *EEMENABLETX *EEMSOSDESC *EEPOWRED *EERPOL *EESIMSWAP *EETIME *EEVINFO *EFDORM *EGNCI *EGPSSAT *EGSCI *EIAAUR *EIAAUW *EIAC *EIAD *EIAIPCPR *EIAIPCPW *EIAPSR *EIAPSW *EIAR *EIAW *EMBBR *EMIBRR *EMRDY *ENAP *ENNIR *EPBR *EPBW *EPEE *EPHD *EPIN *EPSB *ERINFO *ESIM *ESIMSR *ESTKIDLSCR *ESTKMENU *ESTKRES *ESTKS *ESTKUSRACT *ETCHF96 *ETZR *EWNCI *EWSCI &F +GCAP +GMI +GMM +GMR H I +PACSP *STKC *STKE *STKR V &W Z
