Difference between revisions of "Install Mandriva 2009.0 on a ThinkPad W500"
(â†Created page with 'W500 '''this is work under progress''' ==BIOS Issues== Linux (ie Xorg) currently lacks the support for on-the-fly switching of GPUs. It not only does ...') |
(→Display / Xorg) |
||
| (9 intermediate revisions by the same user not shown) | |||
| Line 3: | Line 3: | ||
==BIOS Issues== | ==BIOS Issues== | ||
| + | * [[Switchable Graphics]] | ||
Linux (ie Xorg) currently lacks the support for on-the-fly switching of GPUs. It not only does not support switching, you also have to expicically turn off switching in BIOS. Go to Config->Display->Graphics Device and '''DISABLE''' OS detection of switchable graphics. | Linux (ie Xorg) currently lacks the support for on-the-fly switching of GPUs. It not only does not support switching, you also have to expicically turn off switching in BIOS. Go to Config->Display->Graphics Device and '''DISABLE''' OS detection of switchable graphics. | ||
If you don't disable OS detection, linux will see two graphic adapters (try it with lspci) and will be confused on which one to use, leading to random weird side effects such as hangs and worse. | If you don't disable OS detection, linux will see two graphic adapters (try it with lspci) and will be confused on which one to use, leading to random weird side effects such as hangs and worse. | ||
| + | * AHCI | ||
I also had to turn off AHCI in Config->SATA and used '''Compatibility Mode''' instead, otherwise the kernel would not boot occasionally. | I also had to turn off AHCI in Config->SATA and used '''Compatibility Mode''' instead, otherwise the kernel would not boot occasionally. | ||
| − | The T9400 and up CPUs also support Intel Virtualization technologies. Just don't turn on VT-d (disk I/O virtualization) in BIOS, otherwise WLAN any a couple of other things will not work and even freeze your system, see [https://qa.mandriva.com/show_bug.cgi?id=44711 https://qa.mandriva.com/show_bug.cgi?id=44711] | + | * Intel Virtualization |
| + | The T9400 and up CPUs also support advanced Intel Virtualization technologies. Just don't turn on '''VT-d''' (disk I/O virtualization) in BIOS, otherwise WLAN any a couple of other things will not work and even freeze your system, see [https://qa.mandriva.com/show_bug.cgi?id=44711 https://qa.mandriva.com/show_bug.cgi?id=44711] | ||
==Things not working/issues== | ==Things not working/issues== | ||
| Line 15: | Line 18: | ||
As I've found most of the components are just working out of the box, I will only list the issues I have found so far: | As I've found most of the components are just working out of the box, I will only list the issues I have found so far: | ||
| + | * booting with "vga=788" not working | ||
| + | ** the Mandriva installer added the "vga=788" parameter to my kernel boot line. That prevented the laptop from booting quite frequently, not always though. Still to be investigated, but removing "vga=788" from the kernel boot line solved the issue for now. | ||
* [[Active Protection System]] | * [[Active Protection System]] | ||
** HD-APS is not working for me, probably due to a BIOS bug, see [http://bugzilla.kernel.org/show_bug.cgi?id=12221 http://bugzilla.kernel.org/show_bug.cgi?id=12221] | ** HD-APS is not working for me, probably due to a BIOS bug, see [http://bugzilla.kernel.org/show_bug.cgi?id=12221 http://bugzilla.kernel.org/show_bug.cgi?id=12221] | ||
| − | *** some kind of workaround is to add pnpacpi=off to the kernel boot line, but | + | *** some kind of workaround is to add pnpacpi=off to the kernel boot line, but that turns off ACPI, which is no real option |
* Suspend/Resume | * Suspend/Resume | ||
** while suspending works fine, resuming always ended with a blank screen, workaround below | ** while suspending works fine, resuming always ended with a blank screen, workaround below | ||
| Line 24: | Line 29: | ||
* 3D and radeonhd | * 3D and radeonhd | ||
** the radeonhd driver (still) does not support 3D acceleration | ** the radeonhd driver (still) does not support 3D acceleration | ||
| + | * 2D and fglrx | ||
| + | ** see below | ||
== Suspend/Resume problem == | == Suspend/Resume problem == | ||
| Line 29: | Line 36: | ||
If resuming just leaves you with a blank black display, try the following: | If resuming just leaves you with a blank black display, try the following: | ||
| − | echo "ADD_PARAMETERS='--quirk-vbe-post' > /etc/pm/config.d/w500_vbe_post | + | echo "ADD_PARAMETERS='--quirk-vbe-post'" > /etc/pm/config.d/w500_vbe_post |
== Display / Xorg == | == Display / Xorg == | ||
| − | The laptop comes with | + | The laptop comes with [[Switchable Graphics]], so you can choose on your own which GPU to use: |
* intel | * intel | ||
** consumes the least energy | ** consumes the least energy | ||
** DVI connector on the [[ThinkPad Advanced Mini Dock]] ist not recognoized | ** DVI connector on the [[ThinkPad Advanced Mini Dock]] ist not recognoized | ||
| + | ** a static dual head configuration gives weird background garbage when one of the statically configured monitors is not connected, see [http://bugs.freedesktop.org/show_bug.cgi?id=19412 http://bugs.freedesktop.org/show_bug.cgi?id=19412] | ||
* radeonhd | * radeonhd | ||
| Line 45: | Line 53: | ||
* fglrx | * fglrx | ||
** changing runlevel to 3 (init 3) leaves you with X eating 100% CPU | ** changing runlevel to 3 (init 3) leaves you with X eating 100% CPU | ||
| + | ** huge performance issues when switching between virtual desktops, switching can take a couple of seconds with 100% CPU again | ||
| + | |||
| + | So if battery life and 3D are important for you, you should probably use the intel driver, but I am fine with the radeonhd driver for now. And fglrx is nothing but proprietary nonsense, IMHO ... for a '''commercial''' driver this is ridiculous. | ||
| + | |||
| − | |||
[[Category:W500]][[Category:Mandriva]] | [[Category:W500]][[Category:Mandriva]] | ||
Latest revision as of 15:25, 22 January 2009
W500 this is work under progress
BIOS Issues
Linux (ie Xorg) currently lacks the support for on-the-fly switching of GPUs. It not only does not support switching, you also have to expicically turn off switching in BIOS. Go to Config->Display->Graphics Device and DISABLE OS detection of switchable graphics.
If you don't disable OS detection, linux will see two graphic adapters (try it with lspci) and will be confused on which one to use, leading to random weird side effects such as hangs and worse.
- AHCI
I also had to turn off AHCI in Config->SATA and used Compatibility Mode instead, otherwise the kernel would not boot occasionally.
- Intel Virtualization
The T9400 and up CPUs also support advanced Intel Virtualization technologies. Just don't turn on VT-d (disk I/O virtualization) in BIOS, otherwise WLAN any a couple of other things will not work and even freeze your system, see https://qa.mandriva.com/show_bug.cgi?id=44711
Things not working/issues
As I've found most of the components are just working out of the box, I will only list the issues I have found so far:
- booting with "vga=788" not working
- the Mandriva installer added the "vga=788" parameter to my kernel boot line. That prevented the laptop from booting quite frequently, not always though. Still to be investigated, but removing "vga=788" from the kernel boot line solved the issue for now.
- Active Protection System
- HD-APS is not working for me, probably due to a BIOS bug, see http://bugzilla.kernel.org/show_bug.cgi?id=12221
- some kind of workaround is to add pnpacpi=off to the kernel boot line, but that turns off ACPI, which is no real option
- HD-APS is not working for me, probably due to a BIOS bug, see http://bugzilla.kernel.org/show_bug.cgi?id=12221
- Suspend/Resume
- while suspending works fine, resuming always ended with a blank screen, workaround below
- muted audio not shown in alsa mixer
- when you use the built in "mute audio" button on the ThinkPad keyboard, this is not show in any audio mixer I've tried. So if you don't hear a sound, give the "mute audio" button a try :-)
- 3D and radeonhd
- the radeonhd driver (still) does not support 3D acceleration
- 2D and fglrx
- see below
Suspend/Resume problem
If resuming just leaves you with a blank black display, try the following:
echo "ADD_PARAMETERS='--quirk-vbe-post'" > /etc/pm/config.d/w500_vbe_post
Display / Xorg
The laptop comes with Switchable Graphics, so you can choose on your own which GPU to use:
- intel
- consumes the least energy
- DVI connector on the ThinkPad Advanced Mini Dock ist not recognoized
- a static dual head configuration gives weird background garbage when one of the statically configured monitors is not connected, see http://bugs.freedesktop.org/show_bug.cgi?id=19412
- radeonhd
- consumes the most energy
- lack of 3D support
- fglrx
- changing runlevel to 3 (init 3) leaves you with X eating 100% CPU
- huge performance issues when switching between virtual desktops, switching can take a couple of seconds with 100% CPU again
So if battery life and 3D are important for you, you should probably use the intel driver, but I am fine with the radeonhd driver for now. And fglrx is nothing but proprietary nonsense, IMHO ... for a commercial driver this is ridiculous.
