Difference between revisions of "4187-42G"
(→dmesg) |
(→Output of lspci, lsusb and dmesg) |
||
| (5 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | Product: IdeaPad {{S9e}} 4187-42G | + | Product: IdeaPad {{S9e}} 4187-42G [[Category:Sidux]] |
= Lenovo IdeaPad S9e 4187-42G Specifications = | = Lenovo IdeaPad S9e 4187-42G Specifications = | ||
| + | == CPU and Memory == | ||
| + | |||
| + | {| | ||
| + | |Processor Manufacturer || Intel | ||
| + | |- | ||
| + | |Processor Class || Atom N270 | ||
| + | |- | ||
| + | |Processor Speed || 1.60 GHz | ||
| + | |- | ||
| + | |Front Side Bus || 533 MHz | ||
| + | |- | ||
| + | |Installed Memory || 1024 MB | ||
| + | |- | ||
| + | |Maximum Memory || 1 GB | ||
| + | |- | ||
| + | |Memory Technology || [[PC2-5300]]?! DDR2 SDRAM (667 Mhz) | ||
| + | |- | ||
| + | |Cache Size || 512 KB | ||
| + | |} | ||
| + | |||
| + | === Output of cpuinfo === | ||
| + | Listing of {{cmdroot|cat /proc/cpuinfo}} | ||
| + | processor : 0 | ||
| + | vendor_id : GenuineIntel | ||
| + | cpu family : 6 | ||
| + | model : 28 | ||
| + | model name : Intel(R) Atom(TM) CPU N270 @ 1.60GHz | ||
| + | stepping : 2 | ||
| + | cpu MHz : 1600.000 | ||
| + | cache size : 512 KB | ||
| + | physical id : 0 | ||
| + | siblings : 2 | ||
| + | core id : 0 | ||
| + | cpu cores : 1 | ||
| + | apicid : 0 | ||
| + | initial apicid : 0 | ||
| + | fdiv_bug : no | ||
| + | hlt_bug : no | ||
| + | f00f_bug : no | ||
| + | coma_bug : no | ||
| + | fpu : yes | ||
| + | fpu_exception : yes | ||
| + | cpuid level : 10 | ||
| + | wp : yes | ||
| + | flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc arch_perfmon pebs bts pni monitor ds_cpl est tm2 ssse3 xtpr lahf_lm | ||
| + | bogomips : 3191.94 | ||
| + | clflush size : 64 | ||
| + | power management: | ||
| + | |||
| + | processor : 1 | ||
| + | vendor_id : GenuineIntel | ||
| + | cpu family : 6 | ||
| + | model : 28 | ||
| + | model name : Intel(R) Atom(TM) CPU N270 @ 1.60GHz | ||
| + | stepping : 2 | ||
| + | cpu MHz : 1600.000 | ||
| + | cache size : 512 KB | ||
| + | physical id : 0 | ||
| + | siblings : 2 | ||
| + | core id : 0 | ||
| + | cpu cores : 1 | ||
| + | apicid : 1 | ||
| + | initial apicid : 1 | ||
| + | fdiv_bug : no | ||
| + | hlt_bug : no | ||
| + | f00f_bug : no | ||
| + | coma_bug : no | ||
| + | fpu : yes | ||
| + | fpu_exception : yes | ||
| + | cpuid level : 10 | ||
| + | wp : yes | ||
| + | flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc arch_perfmon pebs bts pni monitor ds_cpl est tm2 ssse3 xtpr lahf_lm | ||
| + | bogomips : 3191.83 | ||
| + | clflush size : 64 | ||
| + | power management: | ||
| + | |||
| + | == Storage == | ||
| + | {| | ||
| + | |Hard Disk || 80 GB 5400 rpm, IDE via SCSI/USB (aka SATA) FUJITSU MHZ2080B. | ||
| + | |- | ||
| + | |Cardreader||.... | ||
| + | |- | ||
| + | |Other||No CD-ROM and other drives. | ||
| + | |- | ||
| + | |} | ||
| + | |||
| + | = Output of lspci, lsusb and dmesg = | ||
| + | (This has been created running [[Sidux]] 2008-04 on 2009-09-01:) | ||
== Output of lspci == | == Output of lspci == | ||
| Line 46: | Line 134: | ||
05:00.0 0280: 14e4:4315 (rev 01) | 05:00.0 0280: 14e4:4315 (rev 01) | ||
| − | == lsusb == | + | == Output of lsusb == |
Listing of {{cmdroot|lsusb}} | Listing of {{cmdroot|lsusb}} | ||
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub | Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub | ||
Latest revision as of 11:17, 10 January 2009
Product: IdeaPad S9e 4187-42G
Contents
Lenovo IdeaPad S9e 4187-42G Specifications
CPU and Memory
| Processor Manufacturer | Intel |
| Processor Class | Atom N270 |
| Processor Speed | 1.60 GHz |
| Front Side Bus | 533 MHz |
| Installed Memory | 1024 MB |
| Maximum Memory | 1 GB |
| Memory Technology | PC2-5300?! DDR2 SDRAM (667 Mhz) |
| Cache Size | 512 KB |
Output of cpuinfo
Listing of # cat /proc/cpuinfo
processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 28 model name : Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping : 2 cpu MHz : 1600.000 cache size : 512 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 1 apicid : 0 initial apicid : 0 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc arch_perfmon pebs bts pni monitor ds_cpl est tm2 ssse3 xtpr lahf_lm bogomips : 3191.94 clflush size : 64 power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 28 model name : Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping : 2 cpu MHz : 1600.000 cache size : 512 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 1 apicid : 1 initial apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc arch_perfmon pebs bts pni monitor ds_cpl est tm2 ssse3 xtpr lahf_lm bogomips : 3191.83 clflush size : 64 power management:
Storage
| Hard Disk | 80 GB 5400 rpm, IDE via SCSI/USB (aka SATA) FUJITSU MHZ2080B. |
| Cardreader | .... |
| Other | No CD-ROM and other drives. |
Output of lspci, lsusb and dmesg
(This has been created running Sidux 2008-04 on 2009-09-01:)
Output of lspci
Listing of # lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02) 00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02) 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02) 02:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express (rev 02) 05:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01)
Listing of # lspci -n
00:00.0 0600: 8086:27ac (rev 03) 00:02.0 0300: 8086:27ae (rev 03) 00:02.1 0380: 8086:27a6 (rev 03) 00:1b.0 0403: 8086:27d8 (rev 02) 00:1c.0 0604: 8086:27d0 (rev 02) 00:1c.1 0604: 8086:27d2 (rev 02) 00:1c.2 0604: 8086:27d4 (rev 02) 00:1d.0 0c03: 8086:27c8 (rev 02) 00:1d.1 0c03: 8086:27c9 (rev 02) 00:1d.2 0c03: 8086:27ca (rev 02) 00:1d.3 0c03: 8086:27cb (rev 02) 00:1d.7 0c03: 8086:27cc (rev 02) 00:1e.0 0604: 8086:2448 (rev e2) 00:1f.0 0601: 8086:27b9 (rev 02) 00:1f.1 0101: 8086:27df (rev 02) 00:1f.2 0101: 8086:27c4 (rev 02) 00:1f.3 0c05: 8086:27da (rev 02) 02:00.0 0200: 14e4:1713 (rev 02) 05:00.0 0280: 14e4:4315 (rev 01)
Output of lsusb
Listing of # lsusb
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 046a:0001 Cherry GmbH My3000 Keyboard Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 0a5c:2150 Broadcom Corp. Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 005: ID 0bda:0158 Realtek Semiconductor Corp. Mass Stroage Device Bus 001 Device 003: ID 5986:0141 Acer, Inc Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Output of dmesg
Listing of # dmesg
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.27-10.slh.1-sidux-686 (Debian 2.6.27-41) (s.l-h@gmx.de) (gcc version 4.3.2 (Debian 4.3.2-1) ) #1 SMP PREEMPT Thu Dec 18 20:06:26 UTC 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003f6d0000 (usable)
BIOS-e820: 000000003f6d0000 - 000000003f6e2000 (ACPI data)
BIOS-e820: 000000003f6e2000 - 000000003f6e3000 (ACPI NVS)
BIOS-e820: 000000003f6e3000 - 0000000040000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
DMI 2.5 present.
last_pfn = 0x3f6d0 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
kernel direct mapping tables up to 38000000 @ 7000-c000
RAMDISK: 37848000 - 37fef69f
ACPI: RSDP 000F7A70, 0024 (r2 PTLTD )
ACPI: XSDT 3F6DB7B5, 0084 (r1 PTLTD XSDT 6040000 LTP 0)
ACPI: FACP 3F6E1CE5, 00F4 (r3 INTEL CALISTGA 6040000 ALAN 1)
ACPI: DSDT 3F6DC9B7, 52BA (r1 INTEL CALISTGA 6040000 INTL 20061109)
ACPI: FACS 3F6E2FC0, 0040
ACPI: APIC 3F6E1DD9, 0068 (r1 INTEL CALISTGA 6040000 LOHR 5A)
ACPI: HPET 3F6E1E41, 0038 (r1 INTEL CALISTGA 6040000 LOHR 5A)
ACPI: MCFG 3F6E1E79, 003C (r1 INTEL CALISTGA 6040000 LOHR 5A)
ACPI: TCPA 3F6E1EB5, 0032 (r1 PTLTD CALISTGA 6040000 PTL 1)
ACPI: TMOR 3F6E1EE7, 0026 (r1 PTLTD 6040000 PTL 3)
ACPI: APIC 3F6E1F0D, 0068 (r1 PTLTD APIC 6040000 LTP 0)
ACPI: BOOT 3F6E1F75, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
ACPI: ASF! 3F6E1F9D, 0063 (r16 CETP CETP 6040000 PTL 1)
ACPI: SSDT 3F6DBDD5, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050624)
ACPI: SSDT 3F6DBD2F, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050624)
ACPI: SSDT 3F6DB839, 04F6 (r2 PmRef CpuPm 3000 INTL 20050624)
ACPI: BIOS bug: multiple APIC/MADT found, using 0
ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
118MB HIGHMEM available.
896MB LOWMEM available.
mapped low ram: 0 - 38000000
low ram: 00000000 - 38000000
bootmap 00008000 - 0000f000
(9 early reservations) ==> bootmem [0000000000 - 0038000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 00004e57e0] TEXT DATA BSS ==> [0000100000 - 00004e57e0]
#4 [0037848000 - 0037fef69f] RAMDISK ==> [0037848000 - 0037fef69f]
#5 [00004e6000 - 00004e9000] INIT_PG_TABLE ==> [00004e6000 - 00004e9000]
#6 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
#7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
#8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
found SMP MP-table at [c00f7b80] 000f7b80
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x00038000
HighMem 0x00038000 -> 0x0003f6d0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x0003f6d0
On node 0 totalpages: 259695
free_area_init_node: node 0, pgdat c042a600, node_mem_map c1000000
DMA zone: 3967 pages, LIFO batch:0
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 30178 pages, LIFO batch:7
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
PERCPU: Allocating 40964 bytes of per cpu data
NR_CPUS: 32, nr_cpu_ids: 2, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257665
Kernel command line: root=UUID=6782e9b9-8034-468e-a4d2-30d5ce0904f7 ro quiet vga=788 dpi=96
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Preemptible RCU implementation.
PID hash table entries: 4096 (order: 12, 16384 bytes)
Extended CMOS year: 2000
TSC: PIT calibration confirmed by PMTIMER.
TSC: using PIT calibration value
Detected 1595.973 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1017572k/1039168k available (2397k kernel code, 20900k reserved, 930k data, 316k init, 121664k highmem)
virtual kernel memory layout:
fixmap : 0xffe18000 - 0xfffff000 (1948 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc0447000 - 0xc0496000 ( 316 kB)
.data : 0xc0357578 - 0xc0440120 ( 930 kB)
.text : 0xc0100000 - 0xc0357578 (2397 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
hpet clockevent registered
Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.94 BogoMIPS (lpj=1595973)
Security Framework initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
CPU: L1 I cache: 32K, L1 D cache: 24K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using mwait in idle threads.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20080609
ACPI: Checking initramfs for custom DSDT
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
Booting processor 1/1 ip 6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3191.83 BogoMIPS (lpj=1595918)
CPU: L1 I cache: 32K, L1 D cache: 24K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (6383.78 BogoMIPS).
net_namespace: 792 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: 0000:00:02.0 reg 10 32bit mmio: [f0500000, f057ffff]
PCI: 0000:00:02.0 reg 14 io port: [1800, 1807]
PCI: 0000:00:02.0 reg 18 32bit mmio: [d0000000, dfffffff]
PCI: 0000:00:02.0 reg 1c 32bit mmio: [f0600000, f063ffff]
PCI: 0000:00:02.1 reg 10 32bit mmio: [f0580000, f05fffff]
PCI: 0000:00:1b.0 reg 10 64bit mmio: [f0640000, f0643fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
PCI: 0000:00:1d.0 reg 20 io port: [1820, 183f]
PCI: 0000:00:1d.1 reg 20 io port: [1840, 185f]
PCI: 0000:00:1d.2 reg 20 io port: [1860, 187f]
PCI: 0000:00:1d.3 reg 20 io port: [1880, 189f]
PCI: 0000:00:1d.7 reg 10 32bit mmio: [f0844000, f08443ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
PCI: 0000:00:1f.1 reg 10 io port: [0, 7]
PCI: 0000:00:1f.1 reg 14 io port: [0, 3]
PCI: 0000:00:1f.1 reg 18 io port: [0, 7]
PCI: 0000:00:1f.1 reg 1c io port: [0, 3]
PCI: 0000:00:1f.1 reg 20 io port: [1810, 181f]
PCI: 0000:00:1f.2 reg 10 io port: [18c8, 18cf]
PCI: 0000:00:1f.2 reg 14 io port: [18c0, 18c3]
PCI: 0000:00:1f.2 reg 18 io port: [18a8, 18af]
PCI: 0000:00:1f.2 reg 1c io port: [180c, 180f]
PCI: 0000:00:1f.2 reg 20 io port: [18b0, 18bf]
PCI: 0000:00:1f.2 reg 24 32bit mmio: [f0844400, f08447ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
PCI: 0000:00:1f.3 reg 20 io port: [18e0, 18ff]
PCI: 0000:02:00.0 reg 10 64bit mmio: [f0200000, f020ffff]
pci 0000:02:00.0: PME# supported from D3hot D3cold
pci 0000:02:00.0: PME# disabled
PCI: bridge 0000:00:1c.0 io port: [2000, 2fff]
PCI: bridge 0000:00:1c.0 32bit mmio: [f0200000, f02fffff]
PCI: bridge 0000:00:1c.0 64bit mmio pref: [f0000000, f00fffff]
PCI: bridge 0000:00:1c.1 io port: [3000, 3fff]
PCI: bridge 0000:00:1c.1 32bit mmio: [f0300000, f03fffff]
PCI: bridge 0000:00:1c.1 64bit mmio pref: [f0100000, f01fffff]
PCI: 0000:05:00.0 reg 10 64bit mmio: [f0400000, f0403fff]
pci 0000:05:00.0: supports D1
pci 0000:05:00.0: supports D2
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:05:00.0: PME# disabled
PCI: bridge 0000:00:1c.2 32bit mmio: [f0400000, f04fffff]
pci 0000:00:1e.0: transparent bridge
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
ACPI: RTC can wake from S4
system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved
system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved
system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved
system 00:03: iomem range 0xfed00000-0xfed003ff could not be reserved
system 00:05: ioport range 0x800-0x80f has been reserved
system 00:05: ioport range 0x1000-0x107f has been reserved
system 00:05: ioport range 0x1180-0x11bf has been reserved
system 00:05: ioport range 0x1640-0x164f has been reserved
system 00:05: ioport range 0xfe00-0xfe00 has been reserved
system 00:05: ioport range 0x380-0x384 has been reserved
system 00:05: ioport range 0x386-0x387 has been reserved
system 00:06: ioport range 0x6a0-0x6af has been reserved
system 00:06: ioport range 0x6b0-0x6ff has been reserved
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0: IO window: 0x2000-0x2fff
pci 0000:00:1c.0: MEM window: 0xf0200000-0xf02fffff
pci 0000:00:1c.0: PREFETCH window: 0x000000f0000000-0x000000f00fffff
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.1: IO window: 0x3000-0x3fff
pci 0000:00:1c.1: MEM window: 0xf0300000-0xf03fffff
pci 0000:00:1c.1: PREFETCH window: 0x000000f0100000-0x000000f01fffff
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:05
pci 0000:00:1c.2: IO window: disabled
pci 0000:00:1c.2: MEM window: 0xf0400000-0xf04fffff
pci 0000:00:1c.2: PREFETCH window: disabled
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06
pci 0000:00:1e.0: IO window: disabled
pci 0000:00:1e.0: MEM window: disabled
pci 0000:00:1e.0: PREFETCH window: disabled
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffffffffffff]
bus: 02 index 0 io port: [2000, 2fff]
bus: 02 index 1 mmio: [f0200000, f02fffff]
bus: 02 index 2 mmio: [f0000000, f00fffff]
bus: 02 index 3 mmio: [0, 0]
bus: 03 index 0 io port: [3000, 3fff]
bus: 03 index 1 mmio: [f0300000, f03fffff]
bus: 03 index 2 mmio: [f0100000, f01fffff]
bus: 03 index 3 mmio: [0, 0]
bus: 05 index 0 mmio: [0, 0]
bus: 05 index 1 mmio: [f0400000, f04fffff]
bus: 05 index 2 mmio: [0, 0]
bus: 05 index 3 mmio: [0, 0]
bus: 06 index 0 mmio: [0, 0]
bus: 06 index 1 mmio: [0, 0]
bus: 06 index 2 mmio: [0, 0]
bus: 06 index 3 io port: [0, ffff]
bus: 06 index 4 mmio: [0, ffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs... done
Freeing initrd memory: 7837k freed
Simple Boot Flag at 0x36 set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1231578391.339:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1765
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: found MSI capability
pci_express 0000:00:1c.0:pcie00: allocate port service
pci_express 0000:00:1c.0:pcie02: allocate port service
pci_express 0000:00:1c.0:pcie03: allocate port service
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.1: found MSI capability
pci_express 0000:00:1c.1:pcie00: allocate port service
pci_express 0000:00:1c.1:pcie02: allocate port service
pci_express 0000:00:1c.1:pcie03: allocate port service
pcieport-driver 0000:00:1c.2: setting latency timer to 64
pcieport-driver 0000:00:1c.2: found MSI capability
pci_express 0000:00:1c.2:pcie00: allocate port service
pci_express 0000:00:1c.2:pcie02: allocate port service
pci_express 0000:00:1c.2:pcie03: allocate port service
vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 1875k, total 7872k
vesafb: mode is 800x600x16, linelength=1600, pages=7
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
hpet_resources: 0xfed00000 is busy
Linux agpgart interface v0.103
Serial: 8250/16550 driver4 ports, IRQ sharing enabled
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Failed to disable AUX port, but continuing anyway... Is this a SiS?
If AUX port is really absent please use the 'i8042.noaux' option.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 316k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
ACPI: SSDT 3F6DC69E, 0245 (r2 PmRef Cpu0Ist 3000 INTL 20050624)
ACPI: SSDT 3F6DC034, 05E5 (r2 PmRef Cpu0Cst 3001 INTL 20050624)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI0007:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 3F6DC8E3, 00D4 (r2 PmRef Cpu1Ist 3000 INTL 20050624)
ACPI: SSDT 3F6DC619, 0085 (r2 PmRef Cpu1Cst 3000 INTL 20050624)
Marking TSC unstable due to TSC halts in idle
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI0007:01: registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (21 C)
tg3.c:v3.94 (August 14, 2008)
tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
tg3 0000:02:00.0: setting latency timer to 64
eth0: Tigon3 [partno(BCM95906) rev c002 PHY(5906)] (PCI Express) 10/100Base-TX Ethernet 00:23:8b:18:33:be
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[0]
eth0: dma_rwctrl[76180000] dma_mask[64-bit]
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0844000
USB Universal Host Controller Interface driver v3.0
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
No dock devices found.
SCSI subsystem initialized
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.27-10.slh.1-sidux-686 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
libata version 3.00 loaded.
usb 1-3: new high speed USB device using ehci_hcd and address 3
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.27-10.slh.1-sidux-686 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.27-10.slh.1-sidux-686 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-3: configuration #1 chosen from 1 choice
usb 1-3: New USB device found, idVendor=5986, idProduct=0141
usb 1-3: New USB device strings: Mfr=3, Product=1, SerialNumber=0
usb 1-3: Product: Lenovo EasyCamera
usb 1-3: Manufacturer: BISON Corporation
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.27-10.slh.1-sidux-686 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 1-5: new high speed USB device using ehci_hcd and address 5
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.27-10.slh.1-sidux-686 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
ata_piix 0000:00:1f.1: version 2.12
ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
Clocksource tsc unstable (delta = -89706899 ns)
usb 1-5: configuration #1 chosen from 1 choice
usb 1-5: New USB device found, idVendor=0bda, idProduct=0158
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5: Product: USB2.0-CRW
usb 1-5: Manufacturer: Generic
usb 1-5: SerialNumber: 20071114173400000
ata2: port disabled. ignoring.
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
usb 2-1: new low speed USB device using uhci_hcd and address 2
Initializing USB Mass Storage driver...
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x18c8 ctl 0x18c0 bmdma 0x18b0 irq 19
ata4: SATA max UDMA/133 cmd 0x18a8 ctl 0x180c bmdma 0x18b8 irq 19
usb 2-1: configuration #1 chosen from 1 choice
usb 2-1: New USB device found, idVendor=046a, idProduct=0001
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
ata3.00: ATA-8: FUJITSU MHZ2080BH G1, 0084000A, max UDMA/100
ata3.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/100
usb 3-2: new full speed USB device using uhci_hcd and address 2
scsi 2:0:0:0: Direct-Access ATA FUJITSU MHZ2080B 0084 PQ: 0 ANSI: 5
Driver 'sd' needs updating - please use bus_type methods
sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 2:0:0:0: [sda] Attached SCSI disk
usb 3-2: configuration #1 chosen from 1 choice
usb 3-2: New USB device found, idVendor=0a5c, idProduct=2150
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-2: Product: BCM2046 Bluetooth Device
usb 3-2: Manufacturer: Broadcom Corp
usb 3-2: SerialNumber: 002269F6064C
scsi4 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver hiddev
input: HID 046a:0001 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input2
input,hidraw0: USB HID v1.00 Keyboard [HID 046a:0001] on usb-0000:00:1d.0-1
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
udevd version 125 started
agpgart-intel 0000:00:00.0: Intel 945GME Chipset
agpgart-intel 0000:00:00.0: detected 7932K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
usb-storage: device scan complete
scsi 4:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
sd 4:0:0:0: [sdb] Attached SCSI removable disk
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
ACPI: Power Button (CM) [PWRB]
input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
ACPI: Sleep Button (CM) [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6
ACPI: Lid Switch [LID]
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/input/input7
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
Bluetooth: Core ver 2.13
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: Generic Bluetooth USB driver ver 0.3
usbcore: registered new interface driver btusb
intel_rng: FWH not detected
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0141)
input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.0/input/input8
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
input: PC Speaker as /devices/platform/pcspkr/input/input9
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ACPI: I/O resource 0000:00:1f.3 [0x18e0-0x18ff] conflicts with ACPI region SMBI [0x18e0-0x18ef]
ACPI: Device needs an ACPI driver
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, hpet irqs
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000
hda_codec: Unknown model for ALC269, trying auto-probe from BIOS...
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10
EXT3 FS on sda3, internal journal
NTFS driver 2.1.29 [Flags: R/W MODULE].
NTFS volume version 3.1.
NTFS-fs warning (device sda1): load_system_files(): Volume is dirty. Will not be able to remount read-write. Run chkdsk and mount in Windows.
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
fuse init (API version 7.9)
NET: Registered protocol family 17
tg3: eth0: Link is up at 100 Mbps, full duplex.
tg3: eth0: Flow control is on for TX and on for RX.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
Bluetooth: L2CAP ver 2.11
Bluetooth: L2CAP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.10
input: Logitech Bluetooth Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/bluetooth/hci0/hci0:11/input11
[drm] Initialized drm 1.1.0 20060810
pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:02.0: setting latency timer to 64
[drm] Initialized i915 1.6.0 20060119 on minor 0
eth0: no IPv6 routers present
