Difference between revisions of "Neomagic MagicMedia256AV"

From ThinkWiki
Jump to: navigation, search
(SVideo port)
Line 16: Line 16:
  
 
=== Linux X.Org driver ===
 
=== Linux X.Org driver ===
This chip is supported by the 'neomagic' driver as part of the X.Org distribution
+
This chip is supported by the 'neomagic' driver as part of the X.Org distribution. Hardware acceleration is not supported at color depths above 16-bit.
  
 
==== ThinkPad LCD ====
 
==== ThinkPad LCD ====

Revision as of 18:13, 17 September 2006

Neomagic MagicMedia256AV

This is a Neomagic video adapter

Features

  • Chipset: Neomagic NM2200
  • PCI ID: 10c8:0005
  • AGP 1X
  • 2.5MB SGRAM

Linux X.Org driver

This chip is supported by the 'neomagic' driver as part of the X.Org distribution. Hardware acceleration is not supported at color depths above 16-bit.

ThinkPad LCD

Display on the internal LCD works as long as you set the monitor settings correct.

External VGA port

??

SVideo port

Works with VESA & mplayer

Linux kernel Framebuffer driver

I use the NeoMagic Framebuffer Driver in the Kernel 2.6.12rc5, since Kernel 2.6.8 with the following Configuration:

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y   


# Graphics support
#
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SOFT_CURSOR=y  
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y
CONFIG_FB_NEOMAGIC=y
 

I normally use the 1024x768-16bit. It is good enough th play mplayer-videos oh this Framebuffer Device with the Option "-vo fbdev". If you use the devfs Filesystem, you must use the device /dev/fb/0 device.

the fb-settings are:

mode "1024x768-60"
   D: 65.003 MHz, H: 48.365 kHz, V: 60.006 Hz
   geometry 1024 768 1024 768 16
   timings 15384 160 24 29 3 136 6
   rgba 5/11,6/5,5/0,0/0
endmode

for questions ask: wohnland@r84.ath.cx

ThinkPads this chip may be found in