|
|
| Line 5: |
Line 5: |
| | Fixed. The problem was the upgrade from Xorg 6.9 to 7.0 The i810 drivers were too new for the mesa packages. Upgrading to libgl1-mesa-dri libgl1-mesa-glx in experimental fixed the problem. | | Fixed. The problem was the upgrade from Xorg 6.9 to 7.0 The i810 drivers were too new for the mesa packages. Upgrading to libgl1-mesa-dri libgl1-mesa-glx in experimental fixed the problem. |
| | *HDAPS | | *HDAPS |
| − | Fixed. I posted my solution on the Mailing list, but I will repost here: | + | Fixed. |
| − | | |
| − | As you all know the the Thinkpad X60 does not exist in the whitelist. My
| |
| − | first attempt at getting hdaps working in debian was to simply add the
| |
| − | model into the whitelist. This is how it ended:
| |
| − |
| |
| − | hdaps: supported laptop not found!
| |
| − | hdaps: driver init failed (ret=-6)!
| |
| − |
| |
| − | With help from Insount on #hdaps he recommended for me to load tp_smapi.
| |
| − | Directions are available here: http://www.thinkwiki.org/wiki/tp_smapi.
| |
| − | While mounting the module, this is what dmesg had to say:
| |
| − |
| |
| − | tp_base: tp_base 0.22 loaded.
| |
| − | tp_smapi: tp_smapi 0.22 loading...
| |
| − | tp_smapi: successfully loaded (smapi_port=0xb2).
| |
| − | hdaps: supported laptop not found!
| |
| − | hdaps: driver init failed (ret=-6)!
| |
| − |
| |
| − | Forcing the hdaps module to load:
| |
| − | 'insmod ./hdaps.ko force=1'
| |
| − |
| |
| − | dmesg reported:
| |
| − |
| |
| − | hdaps: initial latch check good (0x05).
| |
| − | hdaps: device successfully initialized.
| |
| − | input: hdaps as /class/input/input3
| |
| − | hdaps: driver successfully loaded.
| |
| − |
| |
| − | cat /sys/devices/platform/hdaps/position
| |
| − | Verifies that it is working.
| |
| − |
| |
| − | To complete the installation:
| |
| − | make install HDAPS=1"
| |
| − |
| |
| − | and add "force=1" to hdaps in modprobe.conf (or equiv).
| |
| − | | |
| − | To get the module to load in debian first add
| |
| − | tp_smapi
| |
| − | hdaps
| |
| − | to /etc/modules
| |
| − | and then add the file /etc/modprobe.d/hdaps and have it contain:
| |
| − | options hdaps force=1
| |
| | | | |
| | + | HDAPS works fine using tp_smapi 0.27+ |
| | | | |
| | *Hibernating | | *Hibernating |
| | | | |
| − | I also have both hibernating and sleeping working. The only problem is that sda1/ata1 complains a whole lot and ata1 resets.
| + | Both Hibernation and sleep fail on resume. This is most likley do to the serial hard disk. |
| − | | |
| − | I will clean this up when I get some more time.
| |
x60 with Debian Etch
Current Issues
Fixed. The problem was the upgrade from Xorg 6.9 to 7.0 The i810 drivers were too new for the mesa packages. Upgrading to libgl1-mesa-dri libgl1-mesa-glx in experimental fixed the problem.
Fixed.
HDAPS works fine using tp_smapi 0.27+
Both Hibernation and sleep fail on resume. This is most likley do to the serial hard disk.
