Difference between revisions of "Category talk:PC110"
| (One intermediate revision by one other user not shown) | |||
| Line 1: | Line 1: | ||
probably has 4Mb (megabit) ROM rather then 4MB(megabyte) | probably has 4Mb (megabit) ROM rather then 4MB(megabyte) | ||
--[[User:Dunno|Dunno]] 23:50, 13 February 2006 (CET) | --[[User:Dunno|Dunno]] 23:50, 13 February 2006 (CET) | ||
| + | |||
| + | ---- | ||
| + | Sure? [[User:Wyrfel|Wyrfel]] 02:57, 14 February 2006 (CET) | ||
| + | ---- | ||
| + | |||
| + | The "4MB EPROM" is an internal 4MB CompactFlash device, that normally appears as /dev/hda. "With removable media" that hdparm claims here is a lie, unless you're handy with a very small screwdriver and soldering iron. | ||
| + | |||
| + | <pre> | ||
| + | ed@carrot:~$ sudo /usr/sbin/hdparm -I /dev/hda | ||
| + | |||
| + | /dev/hda: | ||
| + | |||
| + | CompactFlash ATA device, with removable media | ||
| + | Model Number: SunDisk SDP3B-4 | ||
| + | Serial Number: MZX00050751 | ||
| + | Firmware Revision: Rev 1.20 | ||
| + | Standards: | ||
| + | Likely used: 4 | ||
| + | Configuration: | ||
| + | Logical max current | ||
| + | cylinders 123 123 | ||
| + | heads 2 2 | ||
| + | sectors/track 32 32 | ||
| + | -- | ||
| + | bytes/track: 0 bytes/sector: 576 | ||
| + | CHS current addressable sectors: 7872 | ||
| + | LBA user addressable sectors: 7872 | ||
| + | device size with M = 1024*1024: 3 MBytes | ||
| + | device size with M = 1000*1000: 4 MBytes | ||
| + | Capabilities: | ||
| + | LBA, IORDY(may be)(cannot be disabled) | ||
| + | Buffer size: 1.0kB bytes avail on r/w long: 4 Queue depth: 1 | ||
| + | Standby timer values: spec'd by Vendor | ||
| + | R/W multiple sector transfer: Max = 1 Current = 0 | ||
| + | DMA: not supported | ||
| + | PIO: pio0 | ||
| + | </pre> | ||
Latest revision as of 21:12, 23 July 2006
probably has 4Mb (megabit) ROM rather then 4MB(megabyte) --Dunno 23:50, 13 February 2006 (CET)
Sure? Wyrfel 02:57, 14 February 2006 (CET)
The "4MB EPROM" is an internal 4MB CompactFlash device, that normally appears as /dev/hda. "With removable media" that hdparm claims here is a lie, unless you're handy with a very small screwdriver and soldering iron.
ed@carrot:~$ sudo /usr/sbin/hdparm -I /dev/hda /dev/hda: CompactFlash ATA device, with removable media Model Number: SunDisk SDP3B-4 Serial Number: MZX00050751 Firmware Revision: Rev 1.20 Standards: Likely used: 4 Configuration: Logical max current cylinders 123 123 heads 2 2 sectors/track 32 32 -- bytes/track: 0 bytes/sector: 576 CHS current addressable sectors: 7872 LBA user addressable sectors: 7872 device size with M = 1024*1024: 3 MBytes device size with M = 1000*1000: 4 MBytes Capabilities: LBA, IORDY(may be)(cannot be disabled) Buffer size: 1.0kB bytes avail on r/w long: 4 Queue depth: 1 Standby timer values: spec'd by Vendor R/W multiple sector transfer: Max = 1 Current = 0 DMA: not supported PIO: pio0
