Difference between revisions of "Xorg RandR 1.2"
Ordonnateur (Talk | contribs) m (→Using {{cmduser|xrandr}}) |
Ordonnateur (Talk | contribs) m (→Using {{cmduser|xrandr}}) |
||
Line 66: | Line 66: | ||
{{HINT|First look at the 'help' and 'man' pages. }} | {{HINT|First look at the 'help' and 'man' pages. }} | ||
− | + | {{cmduser|xrandr --help}} | |
− | + | {{cmduser|man xrandr}} | |
To query what we have (nothing connected to VGA) | To query what we have (nothing connected to VGA) | ||
− | + | {{cmduser| xrandr -v}} | |
Server reports RandR version 1.2 | Server reports RandR version 1.2 | ||
Revision as of 16:16, 28 August 2007
FIXME
|
This page will cover use of Xorg 7.3 with RandR version 1.2 based on testing the forthcoming Ubuntu 'Gutsy' (7.10) release with a Thinkpad R60e (Intel 946GM graphics chip). As the release stabilises so should this page transform from a lab notebook to a fully written-up howto.
|
Contents
Overview
X RandR is used to set the size, orientation and reflection of the screen display outputs.
xrandr is the command line interface to the RandR X extension. As usual with X good documentation is hard to find, to start somewhere try
$ xrandr --help
$ man xrandr
$ man intel
Supported drivers
- X.org intel driver, version 2:2.1.1-0ubuntu2 is current for Gutsy (7.10 Tribe 5)
- X.org radeon driver, current git version
xorg.conf
Start testing with a default configuration. Connect the external display to the VGA port, turn on that display, boot and run (as root)
# dpkg-reconfigure -phigh xserver-xorg
The resulting /etc/X11/xorg.conf should include something like
Section "Device" Identifier "Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller" Driver "intel" BusID "PCI:0:2:0" EndSection Section "Monitor" Identifier "Generic Monitor" Option "DPMS" EndSection Section "Screen" Identifier "Default Screen" Device "Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller" Monitor "Generic Monitor" DefaultDepth 24 ... SubSection "Display" Depth 24 Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480" # BUT ADD A VIRTUAL LINE Virtual 2048 2048 EndSubSection EndSection Section "ServerLayout" Identifier "Default Layout" Screen "Default Screen" InputDevice "Generic Keyboard" InputDevice "Configured Mouse" InputDevice "stylus" "SendCoreEvents" InputDevice "cursor" "SendCoreEvents" InputDevice "eraser" "SendCoreEvents" InputDevice "Synaptics Touchpad" EndSection
after creating a clean Xorg.conf restart X and logon
You will probably find you have a display only on the external VGA screen at its default max resolution.
Using $ xrandr
Open a terminal window to use the command line: 'Applications:Accessories:Terminal'
$ xrandr --help
$ man xrandr
To query what we have (nothing connected to VGA)
$ xrandr -v
Server reports RandR version 1.2
$ xrandr -q
Screen 0: minimum 320 x 200, current 1024 x 768, maximum 1920 x 1440
VGA disconnected (normal left inverted right)
LVDS connected 1024x768+0+0 (normal left inverted right) 304mm x 228mm
1024x768 60.0*+ 50.0
800x600 60.3
640x480 60.0 59.9
TV disconnected (normal left inverted right)
connect, but do not power-on the VGA monitor
$ xrandr -q
Screen 0: minimum 320 x 200, current 1024 x 768, maximum 1920 x 1440
VGA connected (normal left inverted right)
1920x1440@60 60.0
1920x1440 60.0
1600x1200@60 60.0
1600x1200 60.0
1280x960 60.0
640x480@60 60.0
LVDS connected 1024x768+0+0 (normal left inverted right) 304mm x 228mm
1024x768 60.0*+ 50.0
800x600 60.3
640x480 60.0 59.9
TV disconnected (normal left inverted right)
Power-on the VGA
$ xrandr -q
Screen 0: minimum 320 x 200, current 2624 x 1200, maximum 2624 x 2048
VGA connected 1600x1200+1024+0 (normal left inverted right) 367mm x 275mm
1600x1200 60.0*+
1920x1440@60 60.0
1600x1200@60 60.0
640x480@60 60.0
640x480 60.0
LVDS connected 1024x768+0+0 (normal left inverted right) 304mm x 228mm
1024x768 60.0*+ 50.0
800x600 60.3
640x480 60.0 59.9
TV disconnected (normal left inverted right)
More information for bug reports
$ xrandr --verbose
$ xrandr --output LVDS --auto
gets two screens but both at 1600x1200 cloned
$ xrandr --output LVDS --mode 1024x768 --output VGA --off
gets laptop only at 1024x768
$ xrandr --output VGA --right-of LVDS --mode 1600x1200
xrandr: screen cannot be larger than 1600x1600 (desired size 2624x1200)
$ xrandr --output VGA --mode 1600x1200 --pos 0x400
creates two screens with the laptop screen at bottom of the 1600x1600 window
$ xrandr --output LVDS --mode 1024x768 --pos 0x400
moves laptop screen to top of window, so both share same top line (which is where I prefer my menu bar)
$ xrandr --output VGA --mode 1600x1200 --pos 0x768
xrandr: screen cannot be larger than 1920x1440 (desired size 1600x1968)
edit xorg.conf and ensure we have Virtual 2048 2048. Try again and it works we have a laptop screen in a virtual position at the top of a 2048x2048 frame with the VGA monitor below.
Next edit xorg.conf and set Virtual 2624 2048
$ xrandr --output VGA --mode 1600x1200 --pos 1024x0
We now have the laptop screen to the top-left of the 2624x2048 frame and the 1600x1200 VGA sitting beside it to the right. Now if only Gnome would put a menu-bar on the laptop screen and not place desktop icons in the invisible space below 768 on the laptop screen (and below 1200 on the VGA side) all manner of things would be well.
So, the story so far
2007-07-25: xrandr enables dynamic resizing of screens, switching both external and laptop screens on and off, and the applications windows can be dragged from one screen to the other. None of this requires configuring anything special for /etc/X11/xorg.conf. Downside: the virtual screen is not big enough at at 1600x1600 to permit a 1024x768 laptop and a 1600x1200 external monitor screen to be used in a non-overlapped arrangement, something that is possible doing it the old way.
Reboot with VGA disconnected, 1024x768 ok but connecting Dell 1600FP does not detect modes above 1024x768, is this just a problem with this monitor? logoff, gdm now shows clone screen at 1600x1200. logon now only 1600x1200 on VGA and LVDS is off. from various mailing lists etc
2007-08-19: Add a Virtual xdim ydim to your Subsection Display, Depth 24 section just below the Modes line. Choose xdim and ydim so that the lagest non-overlapping configuration you wish to use fits. In my case this is: 1024x768 (LVDS) + 1280x1024 (VGA) => Virtual 2304 1024.
Restart X and run xrandr --output VGA --mode 1280x1024 --left-of LVDS.
2007-08-26 Ubuntu Gutsy Gibbon Tribe 5 release plus some subsequent updates.
The good news: a Graphical Configuration Tool, bad news: it dosn't work too well. If installing from a tribe 5 CD then this will be found in the menu: 'System: Administration: Screens and Graphics'. If you have been upgrading from earlier releases you may need to install from 'Applications: Add/Remove: System Tools'
This provides a dialogue to set the default screen, and a secondary screen as either a mirror of screen 1 or an extended screen. At the moment this is far from stable and changing settings causes modifications to the xorg.conf that will cause X to fail. This issue is not confined to the Thinkpad R60e, testing with a Toshiba U300 produces similar results. It also appears to mess with xorg.conf by adding extra screen configs so if things stop working with command line xrandr check the integrity of xorg.conf . Also it appears that the xorg.conf generated by debian with $ sudo dpkg-reconfigure -phigh xserver-xorg
includes modelines for a Generic Monitor. My post tribe 5 xorg.conf has: (only the [Section "Screen": SubSection "Display": Virtual 2624 2048] has been added by me)
Section "Device" Identifier "Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller" Boardname "intel" Busid "PCI:0:2:0" Driver "intel" Screen 0 Option "MonitorLayout" "CRT,LFP" Option "Clone" "on" Option "CloneRefresh" "60" EndSection Section "Monitor" Identifier "Generic Monitor" Vendorname "Generic LCD Display" Modelname "LCD Panel 1600x1200" Horizsync 31.5-90 Vertrefresh 60 modeline "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync modeline "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync modeline "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync modeline "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync modeline "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync modeline "1400x1050@60" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync modeline "1600x1200@60" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync modeline "1792x1344@60" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync modeline "1856x1392@60" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync modeline "1920x1440@60" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync Gamma 1.0 EndSection Section "Screen" Identifier "Default Screen" Device "Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller" Monitor "Generic Monitor" Defaultdepth 24 SubSection "Display" Depth 24 Virtual 2624 2048 Modes "1024x768@60" "1280x960@60" "800x600@60" "1280x1024@60" "640x480@60" "1400x1050@60" "1600x1200@60" "1792x1344@60" "1856x1392@60" "1920x1440@60" EndSubSection EndSection
Notes from xserver-xorg-video-intel.readme
Known Limitations - No support for "zaphod mode" dualhead. This is the mode in which two Device sections are placed in the config file, and doesn't support DRI or many other features. Instead, only "MergedFB-style" dualhead is supported. - No support for X Screens larger than 2048 pixels in either direction before the 965. This reflects hardware limitations in the x direction on those older chips, and limits dualhead functionality. It may be possible to extend the limit vertically on these older chips. - i855 XV may cause hangs. This was present in the previous release, and no workaround is known. - SDVO TV-out cards not supported. This should be fixed in the next release. - Gray output with integrated TV-out and PAL TVs. - EXA support unstable on i845. - Some GM965 systems, such as the Thinkpad T61, probe the TV as being connected even when no output connector is available.
Common issues not caused by the driver
- Font sizes (DPI) are wrong. Some displays incorrectly report their
physical size, which is harmless on most OSes that always assume 96dpi
displays. This can be fixed through quirks for specific monitors in the X
Server, and the output of xrandr --prop along with a physical measurement of
the screen size in a bug report against the server can help get that fixed.
- gnome-panel is located in the middle of the screen. gnome-panel places
itself within head #0's boundaries, which doesn't work well with a second
head covering the same area as head #0 but larger.
- Older resolution-changing applications have poor results in
multihead systems. Previous extensions such as RandR 1.1 exposed only a
single output to client programs, and those requests map poorly to multi-head
systems. Currently, those requests map to just one of the outputs in the
RandR 1.2 environment, and those applications need to be updated to RandR 1.2
API when available for better results.
Notes from various sources
Virtual size of 2048x2048 is the maximum for the Intel 945. So to configure two non-ovelapping monitors of 1600x1200 and 1024x768 the only option is to stack them verticaly in the virtual pane.
updated Xorg.conf should:
drop dual Device/Screen/Monitor sections from
drop MonitorLayout option and Screen lines from the remaining Device section
drop dual Screen lines from the ServerLayout section
drop RightOf/LeftOf indication to the remaining Screen line in ServerLayout section
add a "Virtual 2048 2048" line in SubSection "Display" to create a large virtual screen where physical monitor will be placed (note that boards < i945 will disable DRI if you use more than 2048 in one direction)
use xrandr --output VGA --right-of LVDS to place you VGA screen on the right of your internal LCD (see xrandr manpage for details)
FreeDesktop.org 2007-June 025469 FreeDesktop.org 2007-June 025484 FreeDesktop.org 2007-July 026340
the 3D engine has an 11 bit coordinate space at one point making it impossible to draw to areas beyond 2048x2048. At another point, it has a stride limit of 8192 bytes, so you can't even draw to a subset of a larger frame buffer.
One more bit in both of these registers would have solved the problem for pretty much any supportable monitor configuration (the chip can only support two single-channel DVI outputs at the most; 1920 is the widest size supported at single-channel speeds).
For multiple monitors, the driver could allocate multiple frame buffers and step through them one at a time with appropriate clipping. It would be icky, but could be made to work.
Of course, the latest hardware (965G/965GM) has plenty of coordinate space, which does tend to reduce the odds that someone will get excited enough to go fix the driver for older chips.
The Gnome menu bar lands on Xinerama Screen 0 at this point, which isn't currently something that you can set through RandR. On Intel the allocation to Screen 0 is determined by CRTC order and LVDS only runs on screen 1.
FreeDesktop.org 2007-June 026053
Blanking of external screen when using xrandr
it's checking to see if you have anything connected to the TV output. To do that, it needs to temporarily unplug the VGA. You can avoid this by ignoring the TV output Section "Monitor" Identifier "TV" Option "Ignore" "True" EndSection Section "Device" Option "monitor-TV" "TV" EndSection If your machine cannot ever have a TV adapter (even with a docking station), we can add a quirk to the driver to never look at the TV output. That requires the pci subsystem values (from lspci -n -v) to plug into the quirk table.
> Version 2.1.1-0ubuntu2 seems to set the default Virtual size (maximum > screen size) to 1920 x 1920, if there is no entry in xorg.conf. I take > it the maximum screen size for the i915 chipset family is 2048 x 2048, > so why not have it at that? This would make dualscreen setups a bit easier. The default settings is found by taking the largest resolution in either x or y dimension and making a square from that. This allows for easy rotation should you want to do so. I believe you should be able to do dual screen up to 8192x8192, though only through two monitors (Only two pipes are available for output), but that 3D acceleration is only supported up to 2048x2048. Thus as soon as you set your virtual size above 2048x2048, you lose 3D acceleration. The current driver cannot reallocate the frame buffer, so whatever size you start with is the maximum the screen can ever become, and that this amount of physical memory is tied down for the whole X server run.
Primary output for Laptop + external screen
>the desired behavior of the video > drivers in typical laptop situations with an internal display and an > external screen attached (extending the desktop). > > Currently for example the intel driver uses the external screen as the > primary output. It is listed first with xrandr. I'm not sure if this is > intentional or just coincidence. It's coincidence -- the laptop hardware has two crtcs, and the LVDS can only be driven by the second. Note that RandR doesn't really want the order to be significant; it would be better if the desktop environment knew about outputs and could refer to a specific output as 'primary' or 'holds toolbar' or whatever.
Questions
1. What if xrandr -q doesn't report multiple screens and both the LVDS and TMDS-1 are stuck in cloned mode?
$ xrandr -q
SZ: Pixels Physical Refresh 0 1400 x 1050 ( 520mm x 520mm ) *60 1 1024 x 768 ( 520mm x 520mm ) 60 2 800 x 600 ( 520mm x 520mm ) 60 3 640 x 480 ( 520mm x 520mm ) 60 4 2048 x 2048 ( 520mm x 520mm ) 60
Current rotation - normal Current reflection - none Rotations possible - normal left inverted right Reflections possible - none
2 Is the 2048x2048 a unfixable limitation for 945GM chipsets or can a BIOs patch help?
Yes this is practically unfixable for 945GM. As subsequent Intel chipsets do not have this problem it is unlikely that the work-arounds required in the intel driver will be implemented. See discussions on xorg mailing list noted above.
3 What is meant by "to configure two non-ovelapping monitors of 1600x1200 and 1024x768 the only option is to stack them verticaly in the virtual pane." By my math 1600+1024>2048 so does't this violate the 2048x2048 limitation? What happens when the limitation is violated? (Error message, ignores setting, something else?)
1600 wide plus 1200 wide is 2800. Therefore if you want your external monitor to the right or left of the laptop screen and do not want windows on one screen to also appear in part on the other screen the total width of the virtual screen needs to be 2800. If the laptop screen is to the top or bottom of the extenal screen (move mouse off top/bottom of one screen to move to the other) then we need 1200 plus 768, so a virtual screen of 1968 x 1600 will do. The problem with this arrangement is to get the Gnome menu bar in a useable position.
4 Shouldn't there be a way to get the version number of xrandr itself? My ~# xrandr --version command reports "Server reports RandR version 1.2" but for me commands such as "xrandr --output LVDS --auto" return the usage and the -q option looks different.
Glossary
VGA Analog VGA output
LVDS Laptop panel
TV Integrated TV output
TMDS-1 First DVI SDVO output
TMDS-2 Second DVI SDVO output
SDVO and DVO TV outputs are not supported by the driver at this time.
References
Version 7.10 (Gutsy) of Ubuntu includes support for Xorg 7.3 with RandR 1.2 Xorg 7.3
For versions of Ubuntu prior to 7.10 see Installing Ubuntu on a ThinkPad R60e for an Xorg.conf suitable for use with more than one screen
RandR extension is currently under development see: Xorg Developer Conference 2007 and X RandR v1.2.
Useful page to supplement the minimal documentation How video cards work
Seamless Monitor Hotplugging with X Windows
Linux Graphics Drivers from Intel
blog post with xrandr-1.2 commands and photos. Narrative is in polish.